製品仕様
| Product SKUs - Discontinued SKU (EOL). Please contact sales-rep for alternative options. | |
|---|---|
| MBD-X7SBL-LN2-O | X7SBL-LN2 (Standard Retail Pack) |
| MBD-X7SBL-LN2-B | X7SBL-LN2 (Bulk Pack) |
| Physical Stats | |
| Form Factor | MicroATX (uATX) |
| Dimensions | 9.6" width x 9.6 " length , (24.4cm x 24.4cm), 6 layers |
| Processor/Cache | |
| CPU | Single LGA775 ZIF Socket Supports Quad-Core Intel® Xeon® X3300/X3200 series Supports Dual-Core Intel® Xeon® E3100/3000 series Supports Intel® Xeon® processor L3360 and L3110 series Supports Intel® Core™2 Quad Q9000/Q8000/Q6000 series Supports Intel® Core™2 Duo E8000/E7000/E6000/E4000 series Supports Intel® Pentium® E5000/E2000 series Supports Intel® Celeron® E1000 and 400 series NOTE: Intel Xeon processor L3014 requires an LGA771 socket and is not supported. |
| System Bus | 1333 / 1066 / 800 MHz system bus |
| System Memory | |
| Memory Capacity | Four 240-pin DIMM sockets Supports up to 8 GB of unbuffered ECC / non-ECC DDR2 800/667MHz memory (Dual Channel) |
| Memory Type | DDR2 800/667MHz unbuffered ECC / non-ECC SDRAM, 240-pin gold-plated DIMMs |
| DIMM Sizes | 256 MB, 512 MB, 1 GB, 2GB |
| Memory Voltage | 1.8V only |
| On-Board Devices | |
| Chipset | Intel® 3200 chipset ICH9R chipset |
| Serial ATA | Intel® ICH9R SATA2 (3 Gbps) controller built-in RAID 0, 1, 5, 10 support (Windows Only) RAID 0, 1, 10 support (Linux) |
| IPMI | Support for 1U Intelligent Platform Management Interface v.2.0 / 1.5 (Optional: AOC-SIMLC-HTC) |
| Network Controllers | 1x Intel® 82573V Gigabit PCI-Express Ethernet 1x Intel® 82573L Gigabit PCI-Express Ethernet Supports 10Base-T, 100Base-TX, 1000BASE-TX, RJ45 output |
| VGA | On-board XGI Volari Z9S 32MB graphics |
| Super I/O | Winbond 83627HG chip |
| Clock Generator | CK505 |
| Input / Output | |
| Serial ATA | Six Serial ATA ports (3 Gbps performance) Six SATA hard drives supported |
| RAID | SATA Zero Channel RAID RAID 0, 1, 5, 10 |
| Floppy | 1 Floppy controller; 1.44 MB |
| LAN | 2 x RJ45 LAN port |
| USB | 7x USB 2.0 / 1.1 compatible 2 rear + 2 headers ( 4 ports ) + 1 on-board |
| VGA | 1x VGA Port |
| Audio | 1x Line In / Line Out / Microphone ports |
| Keyboard / Mouse | PS/2 keyboard and mouse ports |
| Serial Ports | 1x Fast UART 16550 serial port 1x Header |
| Chassis ( Optimized for X7SBL-LN2 ) | |
| 1U Chassis | CSE-512L-260B CSE-513L-260 CSE-811T-260 |
| Mid-Tower | CSE-731i-300B CSE-733E-465B CSE-733i-465B CSE-733T-465B CSE-733TQ-465B |
| Tower / 4U Rackmount | CSE-743TQ-865B |
| Important Note | To ensure system stability, a 300W (minimum) ATX power supply [4-pin +12V AND (20 or 24-pin)] is recommended. |
| Expansion Slots | |
| PCI-Express | 1 (x8) PCI-E slot 1 (x4) PCI-E (using x8) slot |
| PCI | 2x 32-bit 33MHz PCI (5V) slot |
| System BIOS | |
| BIOS Type | 8Mb Flash EEPROM with Phoenix BIOS® |
| BIOS Features | Plug and Play (PnP) DMI 2.3 support PCI 2.2 ACPI 1.0/2.0 USB Keyboard support SMBIOS 2.3 |
| Management | |
| Software | Optional IPMI (Intelligent Platform Management Interface) 2.0 SuperDoctor® III Watch Dog NMI W83793 H/W Monitor |
| Power Configurations | ACPI/APM Power Management Main Switch Override Mechanism Wake-On-Ring (WOR) header Wake-On-LAN (WOL) header Keyboard Wakeup from Soft-Off Power-on mode control for AC power loss recovery Internal / External Modem Rign-on Suspend to RAM (STR) |
| PC Health Monitoring | |
| Voltage | Monitors for CPU Cores +1.8V, +3.3V, +5V, ±12V, 3.3V Standby, 5V Standby, VBAT CPU 4-Phase-switching voltage regulator with auto-sense from 0.8375V-1.6000V Adjustable CPU clock frequency ratio (Only available if CPU is supported) |
| FAN | Total of six 4-pin fan headers 6 fans with tachometer monitoring Status monitor with firmware speed control Low noise fan speed control Status monitor for on/off control Support 3-pin fans (without speed control) Pulse Width Modulated (PWM) fan connector |
| Temperature | Monitoring for CPU and chassis environment CPU thermal trip support Thermal Monitor 2 (TM2) support PECI |
| LED | CPU / System Overheat LED Suspend state indicator LED Standby Power alert LED |
| Other Features | Chassis Intrusion Detection Chassis Intrusion Header |
| Operating Environment | |
| Environmental Spec. | Operating Temperature: 10°to 35°C (50°to 95°F) Non-operating Temperature: -40°to 70°C (-40°to 158°F) Operating Relative Humidity: 8% to 90% (non-condensing) Non-operating Relative Humidity: 5 to 95% (non-condensing) |
キーワードから探す
CLOSE
