製品情報

M1K2-5A10V4H(1010W)

製品種別 電源 (Zippy)
電源の種類 Micro Redundant
製品説明

製品仕様

wattage 1010W
solution Server ,Workstation ,Storage System
dimension_mm 375x106x41.3
dimension_inch 14.76x4.17x1.63
input_spec VOLTAGE: 100~264VAC FULL RANGEFREQUENCY: 47~63HzINPUT CURRENT:7.5A (RMS)FOR 230VAC / 15A(RMS)FOR 115VACINRUSH CURRENT:15A MAX. FOR 115 VAC PER MODULE / 30A MAX. FOR 230 VAC PER MODULE
dc_output Output VoltageOutput Current Min.Output Current Max.Regulation LoadRegulation LineOutput Ripple & Noise Max.[P-P]+5V022±5%±1%50mV+12V284±5%±1% 120mV -12V00.5±5%±1%120mV+3.3V022±5%±1%50mV+5VSB0.13±5%±1%50mV
*THE OUTPUT CURRENT OF +5V and +3.3V NOT EXCEED 150W *POWER MODULE TOTAL OUTPUT POWER NOT EXCEED 1010W *90Vac~132Vac INPUT:ONCE AC or PS_ON TURN ON THE POWER SUPPLY, THE TOTAL MAX. POWER IS REQUESTED TO BE LESS THAN 80% OF MAX. LOAD.

features * TEMPERATURE RANGE:OPERATING 0℃~50℃,STORAGE -20℃~80℃
* EFFICIENCY:TYPICAL 83% AT 115V; TYPICAL 86% AT 230V (FULL LOAD)
* OVER POWER PROTECTION:105~150% MAX
* OVER VOLTAGE PROTECTION:+3.3V→3.7~4.1V, +5V→5.7~6.5V, +12V→12.8~13.9V
* OVER CURRENT PROTECTION
* SHORT CIRCUIT PROTECTION
* SAFETY:TO MEET UL, CUL, TUV, CCC


*THE POWER-SUPPLY IS FOR CHASSIS-ASSEMBLY ONLY AND IS NOT ALLOWED TO BE OPERATED AS STAND-ALONE COMPONENT. FINAL ASSEMBLY HAS TO COMPLY WITH CORRESPONDING EMC- AND SAFETY-REGULATIONS.
pdf MTBF(RoHS)(PMBus NP1.2):http://www.zippy.com.tw//backend/DownLoad/DownLoad/Power/MTBF/M1K2-5A10V4H(PMBus%20NP1.2)(RoHS).pdf DRAWING:http://www.zippy.com.tw//backend/DownLoad/DownLoad/Power/DRAWING/M1K2MA07.pdf