DM1W-2810V(810W)
| 製品種別 | 電源 (Zippy) |
|---|---|
| 電源の種類 | Redundant module DC |
| 製品説明 |
製品仕様
| wattage | 810W |
|---|---|
| solution | Server ,Workstation ,Storage System ,Communication ,Networking |
| dimension_mm | 265.3x98.4x40 |
| dimension_inch | 10.44x3.87x1.57 |
| input_spec | VOLTAGE： 36～72VDC FREQUENCY： DC INPUT CURRENT：30A (RMS) FOR 36VDC INRUSH CURRENT：30A MAX. |
| dc_output |
|
| features | * TEMPERATURE RANGE：OPERATING 0℃～50℃ * HOLD UP TIME：1 mS MINIMUM AT FULL LOAD & NOMINAL INPUT VOLTAGE * DIELECTRIC WITHSTAND：INPUT/OUTPUT 1800 VAC FOR 1 SECOND INPUT TO FRAME GROUND 1800 VAC FOR 1 SECOND * EFFICIENCY：86%，AT 48VDCin ,FULL LOAD * POWER GOOD SIGNAL：ON DELAY 100mS TO 550mS * OVER POWER PROTECTION：110～150% MAX * OVER VOLTAGE PROTECTION： +12V→13.2V～15V * SHORT CIRCUIT PROTECTION： +12V * EMI NOISE FILTER : CISPR22 CLASS A * SAFETY: TO MEET UL, CUL, TUV * REMOTE ON/OFF CONTROL THE POWER SUPPLY SHALL ACCEPT A LOGIC OPEN COLLECTOR LEVEL WHICH WILL DISABLE/ENABLE ALL THE OUTPUT VOLTAGE (EXCLUDE +5V STAND BY). AS LOGIC LEVEL IS LOW，OUTPUTS VOLTAGE WERE ENABLE， AS LOGIC LEVEL IS HIGH，OUTPUTS VOLTAGE WERE DISABLE. * COOLING : TWO 38mm DC FANS *THE POWER-SUPPLY IS FOR CHASSIS-ASSEMBLY ONLY AND IS NOT ALLOWED TO BE OPERATED AS STAND-ALONE COMPONENT. FINAL ASSEMBLY HAS TO COMPLY WITH CORRESPONDING EMC- AND SAFETY-REGULATIONS. |
