M1U-2750V(D)(750W)
| 製品種別 | 電源 (Zippy) |
|---|---|
| 電源の種類 | Redundant module |
| 製品説明 |
製品仕様
| wattage | 750W |
|---|---|
| solution | Server ,Workstation ,Storage System |
| dimension_mm | 300x50.5x40 |
| dimension_inch | 11.81x1.99x1.57 |
| input_spec | VOLTAGE： 90～264VAC FULL RANGE FREQUENCY： 47～63HZ INPUT CURRENT：6A（RMS）FOR 230VAC 12A（RMS）FOR 115VAC INRUSH CURRENT：15A MAX. FOR 115 VAC PER MODULE 30A MAX. FOR 230 VAC PER MODULE |
| dc_output |
|
| features | * TEMPERATURE RANGE：OPERATING 0℃～50℃，STORAGE -20℃～80℃ * HOLD UP TIME：16mS MIN. AT FULL LOAD & 115 VAC INPUT VOLTAGE * DIELECTRIC WITHSTAND：INPUT/OUTPUT 1500 VAC FOR 1 MINUTE * INPUT TO FRAME GROUND 1500 VAC FOR 1 minute * EFFICIENCY：TYPICAL 85% AT 115V, 12V/54A 5VSB/0.4A; TYPICAL 88% AT 230V, 12V/54A 5VSB/0.4A * POWER GOOD SIGNAL：ON DELAY 100mS TO 500mS，OFF DELAY 1mS * OVER POWER PROTECTION：110～150% MAX * OVER VOLTAGE PROTECTION：+12V→13.2~15V * OVER CURRENT PROTECTION：110~150% * SHORT CIRCUIT PROTECTION: +12V * SAFETY：TO MEET UL, CUL, TUV * FAULTY ALARM METHODS: LED, BUZZER, TTL SIGNAL * MEET IEC-1000-3-2 CLASS D (ACTIVE PFC) *THE POWER-SUPPLY IS FOR CHASSIS-ASSEMBLY ONLY AND IS NOT ALLOWED TO BE OPERATED AS STAND-ALONE COMPONENT. FINAL ASSEMBLY HAS TO COMPLY WITH CORRESPONDING EMC- AND SAFETY-REGULATIONS. |
| DRAWING:http://www.zippy.com.tw//backend/DownLoad/DownLoad/Power/DRAWING/M1UDMA00.pdf TUV:http://www.zippy.com.tw//backend/DownLoad/DownLoad/Power/TUV/M1U-V%20&%20M1U2-V%20TUV.pdf CB:http://www.zippy.com.tw//backend/DownLoad/DownLoad/Power/CB/M1U-V%20&%20M1U2-V%20&%20M1V-V%20&%20M1V2-V%20CB.pdf CCC:http://www.zippy.com.tw//backend/DownLoad/DownLoad/Power/CCC/M1U-V%20&%20M1U2-V%20CCC.pdf MTBF(RoHS):http://www.zippy.com.tw//backend/DownLoad/DownLoad/Power/MTBF/M1U-2750V(D)(RoHS).pdf MTBF(RoHS)(35℃):http://www.zippy.com.tw//backend/DownLoad/DownLoad/Power/MTBF/M1U-2750V(D)(RoHS)(35%e2%84%83).pdf BSMI:http://www.zippy.com.tw//backend/DownLoad/DownLoad/Power/BSMI/M1U-V%20&%20M1V-V%20&%20M1U2-V%20&%20M1V2-V%20BSMI.pdf |
