M1W-3600V(600W)
製品種別 | 電源 (Zippy) |
---|---|
電源の種類 | Redundant module |
製品説明 |
製品仕様
wattage | 600W |
---|---|
solution | Server ,Workstation ,Storage System ,IPC ,Blade server |
dimension_mm | 265.3x98.4x40.5 |
dimension_inch | 10.44x3.87x1.59 |
input_spec | VOLTAGE: 90 ~ 264VAC FREQUENCY: 47 ~ 63Hz INPUT CURRENT: 9.0/4.0A MAX AT ANY LOW/HIGH INPUT VOLTAGE INRUSH CURRENT: 35/70A @115/230VAC(25℃) POWER FACTOR CORRECTION: 95% @ 110V, FULL LOAD |
dc_output |
|
features | * TEMPERATURE RANGE:OPERATING 0℃~40℃, STORAGE -20℃~80℃ * HOLD UP TIME:16mS MINIMUM AT FULL LOAD & NOMINAL INPUT VOLTAGE * DIELECTRIC WITHSTAND:INPUT/OUTPUT 1800 VAC FOR 1 SECOND INPUT TO FRAME GROUND 1800 VAC FOR 1 SECOND * EFFICIENCY:>82% AT 115V, 20%~100% MAX LOAD. * POWER GOOD SIGNAL:ON DELAY 100mS TO 500mS,OFF DELAY 1mS * OVER POWER PROTECTION:110~160% MAX * OVER VOLTAGE PROTECTION:+12V→13.3V~14.3V * SHORT CIRCUIT PROTECTION: +12V, +5VSB, -12V * EMI NOISE FILTER : FCC CLASS B, CISPR22 CLASS B * SAFETY : TO MEET UL, CUL, TUV * REMOTE ON/OFF CONTROL * LEAKAGE CURRENT: 3.5MA. MAX. AT NOMINAL VOLTAGE 250VAC * SAFETY: TO MEET UL, TUV * COOLING : TWO 38mm DC FANS *THE POWER-SUPPLY IS FOR CHASSIS-ASSEMBLY ONLY AND IS NOT ALLOWED TO BE OPERATED AS STAND-ALONE COMPONENT. FINAL ASSEMBLY HAS TO COMPLY WITH CORRESPONDING EMC- AND SAFETY-REGULATIONS. |