Q1H-5060V(60W)
| 製品種別 | 電源 (Zippy) |
|---|---|
| 電源の種類 | Open Frame |
| 製品説明 |
製品仕様
| wattage | 60W |
|---|---|
| solution | Server ,Workstation ,Storage System ,IPC |
| dimension_mm | 126x55x39 |
| dimension_inch | 4.96x2.17x1.54 |
| input_spec | VOLTAGE： 90～264VAC FULL RANGE FREQUENCY： 47～63HZ INPUT CURRENT：1.5A (RMS) FOR 115 VAC / 1A (RMS) FOR 230 VAC INRUSH CURRENT：35A MAX. FOR 115 VAC / 70A MAX. FOR 230 VAC |
| dc_output |
+5V AND +3.3V TOTAL OUTPUT MAX: 40W (WITHOUT FAN) MAXIMUM OUTPUT POWER: 60W (FAN CFM: 8) |
| features | * TEMPERATURE RANGE：OPERATING 0℃～70℃, STORAGE –20℃~80℃ * HOLD UP TIME：116mS MINIMUM AC115V @80% OF FULL LOAD * EFFICIENCY：80%±2% TYPICAL，AT FULL LOAD 115VAC * POWER GOOD SIGNAL：ON DELAY 100mS TO 550mS，OFF DELAY 1mS * OVER POWER PROTECTION: 110～160% MAX * OVER VOLTAGE PROTECTION: +3.3V→3.6V~4.3V, +5V→5.6V~6.5V, +12V→13.2V~15.0V * SHORT CIRCUIT PROTECTION: +5V, +3.3V, +12V, -12V, +5VSB * SAFETY : TO MEET UL, CUL, TUV, CCC * LEAKAGE CURRENT: 3.5MA MAX. AT NOMINAL VOLTAGE 264VAC *THE POWER-SUPPLY IS FOR CHASSIS-ASSEMBLY ONLY AND IS NOT ALLOWED TO BE OPERATED AS STAND-ALONE COMPONENT. FINAL ASSEMBLY HAS TO COMPLY WITH CORRESPONDING EMC- AND SAFETY-REGULATIONS. |
| DRAWING:http://www.zippy.com.tw//backend/DownLoad/DownLoad/Power/DRAWING/Q1H0MA00.pdf MTBF(RoHS):http://www.zippy.com.tw//backend/DownLoad/DownLoad/Power/MTBF/Q1H-5060V(RoHS).pdf MTBF(RoHS)(50℃):http://www.zippy.com.tw//backend/DownLoad/DownLoad/Power/MTBF/Q1H-5060V(RoHS)(50%e2%84%83).pdf FCC:http://www.zippy.com.tw//backend/DownLoad/DownLoad/Power/FCC/Q1H-5060V%20FCC.pdf CB:http://www.zippy.com.tw//backend/DownLoad/DownLoad/Power/CB/Q1H-V%20CB.pdf TUV:http://www.zippy.com.tw//backend/DownLoad/DownLoad/Power/TUV/Q1H-V%20TUV.pdf CCC:http://www.zippy.com.tw//backend/DownLoad/DownLoad/Power/CCC/Q1H-V%20CCC.pdf CE(Radiation):http://www.zippy.com.tw//backend/DownLoad/DownLoad/Power/CE/Q1H-5060V%20(Radiation).pdf |
