DM4W-6D50F(1350W)
| 製品種別 | 電源 (Zippy) |
|---|---|
| 電源の種類 | N+1 Redundant |
| 製品説明 |
製品仕様
| wattage | 1350W |
|---|---|
| solution | Server ,Workstation ,Storage System ,IPC ,Communication |
| dimension_mm | 300x101x166 |
| dimension_inch | 11.81x3.98x6.54 |
| input_spec | VOLTAGE: -36 ~ -72 VDC INPUT CURRENT: 15 A ( RMS ) FOR – 48 VDC STEADY-STATE CURRENT: 52/26A AT -36/-72VDC INRUSH CURRENT : 30 A MAX. |
| dc_output |
|
| features | * TEMPERATURE RANGE: OPERATING 0℃ --- 40℃,STORAGE -20℃ --- 80℃ * HOLD UP TIME: 1.6 ms MINIMUM AT FULL LOAD & -48VDC INPUT VOLTAGE * EFFICIENCY: 71% TYPICAL AT DC-48 INPUT, FULL LOAD * REMOTE ON/OFF CONTROL * HUMIDITY: OPERATING HUMIDITY—20% TO 80%; NON-OPERATING HUMIDITY— 10% TO 90% * POWER GOOD SIGNAL: ON DELAY 100 ms TO 500 ms, OFF DELAY 1 ms * OVER POWER PROTECTION: 110~160% * OVER VOLTAGE PROTECTION: +5V→5.7~6.5V, +3.3V→3.9~4.7V, +12V→13.3~14.3V * OVER CURRENT PROTECTION: +5V, +12V, +3.3V, LIMITED CURRENT IS OVER 110~180% FOR EACH OUTPUT CURRENT AT EACH POWER MODULE. * SHORT CIRCUIT PROTECTION: +5V, +3.3V, +12V, -5V, -12V * SAFETY: TO MEET UL, CUL, TUV *THE POWER-SUPPLY IS FOR CHASSIS-ASSEMBLY ONLY AND IS NOT ALLOWED TO BE OPERATED AS STAND-ALONE COMPONENT. FINAL ASSEMBLY HAS TO COMPLY WITH CORRESPONDING EMC- AND SAFETY-REGULATIONS. |
| CB:http://www.zippy.com.tw//backend/DownLoad/DownLoad/Power/CB/DM1WX%20&%20DMXW%20CB.pdf TUV:http://www.zippy.com.tw//backend/DownLoad/DownLoad/Power/TUV/DM1WX%20TUV.pdf MTBF:http://www.zippy.com.tw//backend/DownLoad/DownLoad/Power/MTBF/DM4W-6D50F.pdf CCC:http://www.zippy.com.tw//backend/DownLoad/DownLoad/Power/CCC/DM1WX%20&%20DMXW%20CCC.pdf MTBF(ROHS):http://www.zippy.com.tw//backend/DownLoad/DownLoad/Power/MTBF/DM4W-6D50F(RoHS).pdf |
