製品情報

メーカー製品ページ

M1W4-6D50P(D)(1350W)

製品種別 電源 (Zippy)
電源の種類 N+1 Redundant
製品説明

製品仕様

wattage 1350W
solution Server ,Workstation ,Storage System ,Communication ,Networking
dimension_mm 340x422x42
dimension_inch 13.39x16.61x1.65
input_spec VOLTAGE: 100V ~ 240VAC (WITH ± 10% TOLERANCE) FREQUENCY: 47Hz ~ 63Hz INPUT CURRENT: 20-10A MAX AT ANY LOW/HIGH INPUT VOLTAGE INRUSH CURRENT: 60/100A @ 115/230VAC (25℃) POWER FACTOR CORRECTION: 95% @ 110V, FULL LOAD
dc_output Output VoltageOutput Current Min.Output Current Max.Regulation LoadRegulation LineOutput Ripple & Noise Max.[P-P]+5V1; +5V26.084.5± 5%± 50mV70mV+12V1; +12V26.090± 6%± 50mV 120mV -5V1; -5V20.21.2+5%, -10%± 50mV120mV-12V1; -12V20.21.2+5%, -10%± 50mV120mV+3.3V1; +3.3V23.567.5± 5%± 50mV70mV+5VSB1; +5VSB20.43.5+5%, -6%± 50mV70mV
* POWER MODULE TOTAL CURRENT OF +5V AND +3.3V NOT EXCCED 40A
* POWER MODULE TOTAL OUTPUT POWER NOT EXCEED 500W
* TOTAL OUTPUT POWER 3+1=1350W

features ‧TEMPERATURE RANGE: OPERATING: 0℃ ~ 40℃; STORAGE: -20℃ ~ 80℃
‧HUMIDITY:OPERATING:20%-95%, NON-OPERATING:10%-95%
‧REMARKS:85% IS NORMAL CONDITION AND 95% IS WITH SPECIAL COATING PROCESS
‧HOLD UP TIME: 16 ms MINIMUM AT FULL LOAD & NORMAL INPUT VOLTAGE
‧DIELECTRIC WITHSTAND: INPUT / OUTPUT 1500 VAC FOR 1 SECOND
INPUT TO FRAME GROUND 1500 VAC FOR 1 SECOND
‧EFFICIENCY: 67% TYPICAL AT 115VAC FULL LOAD
POWER GOOD SIGNAL: ON DELAY 100 ms TO 500 ms, OFF DELAY 1 ms
‧OVER POWER PROTECTION: 110% ~ 150%
‧OVER VOLTAGE PROTECTION: +5V ->5.7V ~ 6.5V, 3.3V -> 3.9V ~ 4.7V,+12V -> 13.3V ~ 14.3V
‧OVER CURRENT PROTECTION: 110% ~ 180%
‧SHORT CIRCUIT PROTECTION: +5V, -5V, +12V, -12V, +3.3V
‧EMI NOISE FILTER: FCC CLASS A, CISPR22 CLASS A
‧SAFETY: UL&CUL, TÜV


*THE POWER-SUPPLY IS FOR CHASSIS-ASSEMBLY ONLY AND IS NOT ALLOWED TO BE OPERATED AS STAND-ALONE COMPONENT. FINAL ASSEMBLY HAS TO COMPLY WITH CORRESPONDING EMC- AND SAFETY-REGULATIONS.
製品一覧へ戻る

Search by Subject 課題から探す

課題から探す一覧