M1P4-6D50V4H(1350W)
| 製品種別 | 電源 (Zippy) |
|---|---|
| 電源の種類 | N+1 Redundant |
| 製品説明 |
製品仕様
| wattage | 1350W |
|---|---|
| solution | Server ,Workstation ,IPC |
| dimension_mm | 260x359x41.8 |
| dimension_inch | 10.24x14.13x1.65 |
| input_spec | VOLTAGE: 90V ~ 264VAC (WITH ± 10% TOLERANCE) FREQUENCY: 47Hz ~ 63Hz INPUT CURRENT: 21/10A MAX AT ANY LOW/HIGH INPUT VOLTAGE INRUSH CURRENT: 40/60A @ 115/230VAC (25℃) POWER FACTOR CORRECTION: PFC CAN REACH THE TARGET OF 95% @ 115V, FULL LOAD, FOLLOWING THE STANDARD OF IEC 1000-3-2 |
| dc_output |
* TOTAL OUTPUT MAX: 1350W |
| features | * TEMPERATURE RANGE: OPERATING: 0℃ ~ 40℃, STORAGE: -20℃ ~ 80℃ * HOLD UP TIME: 16 ms MINIMUM AT FULL LOAD & NORMAL INPUT VOLTAGE * EFFICIENCY: 80% TYPICAL AT 115VAC FULL LOAD * POWER GOOD SIGNAL: ON DELAY 100 ms TO 500 ms, OFF DELAY 1 ms * OUTPUT PROTECTION: OPP / OVP / OCP / SCP * REMOTE ON/OFF CONTROL * FAULTY ALARM METHODS: LED, BUZZER, TTL SIGNAL * HOT-SWAPPABLE/HOT PLUGGABLE REDUNDANCY FUNCTION * ISOLATION: BUILT-IN THE POWER MODULE * SAFETY: TO MEET UL, CUL, TUV, CCC * REMOTE SENSING DESIGN * THE POWER-SUPPLY IS FOR CHASSIS-ASSEMBLY ONLY AND IS NOT ALLOWED TO BE OPERATED AS STAND-ALONE COMPONENT. FINAL ASSEMBLY HAS TO COMPLY WITH CORRESPONDING EMC- AND SAFETY-REGULATIONS. |
| MTBF(RoHS):http://www.zippy.com.tw//backend/DownLoad/DownLoad/Power/MTBF/M1P4-6D50V4H(RoHS).pdf DRAWING:http://www.zippy.com.tw//backend/DownLoad/DownLoad/Power/DRAWING/M1P4VMA00.pdf CE(Radiation):http://www.zippy.com.tw//backend/DownLoad/DownLoad/Power/CE/M1P4-6D50V4H%20(Radiation).pdf FCC:http://www.zippy.com.tw//backend/DownLoad/DownLoad/Power/FCC/M1P4-6D50V4H%20FCC.pdf MTBF(RoHS)(40℃):http://www.zippy.com.tw//backend/DownLoad/DownLoad/Power/MTBF/M1P4-6D50V4H(RoHS)(40%e2%84%83).pdf CB:http://www.zippy.com.tw//backend/DownLoad/DownLoad/Power/CB/M1P-V%20&%20M1P2-V%20&%20M1P4-V%20%20CB.pdf TUV:http://www.zippy.com.tw//backend/DownLoad/DownLoad/Power/TUV/M1P-V%20&%20M1P2-V%20&%20M1P4-V%20TUV.pdf |
