BMTW4-5B40V3H(1140W)
| 製品種別 | 電源 (Zippy) |
|---|---|
| 電源の種類 | N+1 Redundant DC |
| 製品説明 |
製品仕様
| wattage | 1140W |
|---|---|
| solution | Server ,Workstation ,Storage System ,IPC ,Communication ,Networking |
| dimension_mm | 340x422x43 |
| dimension_inch | 13.4x16.6x1.7 |
| input_spec | VOLTAGE: 19 ~ 36VDC, NOMAL 24VDC STEADY-STATE CURRENT: 90/42AMPS AT ANY LOW/HIGH RANGE INPUT VOLTAGE INRUSH CURRENT: 50AMPS @ 24VDC |
| dc_output |
* TOTAL OUTPUT MAX: 1140W (AT 18V ONLY 1040W) |
| features | * TEMPERATURE RANGE: OPERATING 0℃ ~ 40℃, STORAGE –20℃ ~ 80℃ * HOLD UP TIME: 1ms MINIMUM AT FULL LOAD & 24VDC INPUT VOLTAGE * DIELECTRIC WITHSTANDING: INPUT/OUTPUT 1500 VAC FOR 1 MINUTE * EFFICIENCY: >80% TYPICAL AT 24VDC, 30~100% MAX LOAD * POWER GOOD SIGNAL: ON DELAY 100 ms TO 500 ms, OFF DELAY 1 ms * OVER LOAD PROTECTION: 110 ~ 160% MAX * OVER VOLTAGE PROTECTION:+5V → 5.9V ~ 6.7V, +3.3V → 3.9V ~ 4.3V, +12V → 13.3V ~ 15V * OVER CURRENT PROTECTION: +5V +12V +3.3V * SHORT CIRCUT PROTECTION * EMI: MEET FCC CLASS A, CISPR 22 CLASS A * SAFETY: MEET UL&CUL, TUV, CCC * REMOTE ON / OFF CONTROL * DC INLET IN EACH MODULE * THE POWER-SUPPLY IS FOR CHASSIS-ASSEMBLY ONLY AND IS NOT ALLOWED TO BE OPERATED AS STAND-ALONE COMPONENT. FINAL ASSEMBLY HAS TO COMPLY WITH CORRESPONDING EMC- AND SAFETY-REGULATIONS. |
