製品情報

メーカー製品ページ

M1P4-6950V4H(950W)

製品種別 電源 (Zippy)
電源の種類 N+1 Redundant
製品説明

製品仕様

wattage 950W
solution Server ,Workstation ,IPC
dimension_mm 260x359x41.8
dimension_inch 10.24x14.13x1.65
input_spec VOLTAGE: 90V ~ 264VAC (WITH ± 10% TOLERANCE) FREQUENCY: 47Hz ~ 63Hz INPUT CURRENT: 15/8A MAX AT ANY LOW/HIGH INPUT VOLTAGE INRUSH CURRENT: 40/60A @ 115/230VAC (25℃) POWER FACTOR CORRECTION: PFC CAN REACH THE TARGET OF 95% @ 115V, FULL LOAD, FOLLOWING THE STANDARD OF IEC 1000-3-2
dc_output Output VoltageOutput Current Min.Output Current Max.Regulation LoadRegulation LineOutput Ripple & Noise Max.[P-P]+5V10.532±5%±1%50mV+5V20.532±5%±1% 50mV +12V679±5%±1%50mV-12V0.10.5±5%±1%50mV+3.3V0.525±5%±1%50mV+5VSB0.55±5%±1%50mV
REMARKS:
* +5V1, +5V2 AND +3.3V TOTAL OUTPUT MAX: 350W
* TOTAL OUTPUT MAX: 950W

features * TEMPERATURE RANGE: OPERATING: 0℃ ~ 40℃, STORAGE: -20℃ ~ 80℃
* HOLD UP TIME: 16 ms MINIMUM AT FULL LOAD & NORMAL INPUT VOLTAGE
* EFFICIENCY: TYPICAL >80% AT 115VAC FULL LOAD
* POWER GOOD SIGNAL: ON DELAY 100 ms TO 500 ms, OFF DELAY 1 ms
* OUTPUT PROTECTION: OPP / OVP / OCP / SCP
* REMOTE ON/OFF CONTROL
* FAULTY ALARM METHODS: LED, BUZZER, TTL SIGNAL
* HOT-SWAPPABLE/HOT PLUGGABLE REDUNDANCY FUNCTION
* ISOLATION: BUILT-IN THE POWER MODULE
* SAFETY: TO MEET UL, CUL, TUV, CCC
* REMOTE SENSING DESIGN

* THE POWER-SUPPLY IS FOR CHASSIS-ASSEMBLY ONLY AND IS NOT ALLOWED TO BE OPERATED AS STAND-ALONE COMPONENT. FINAL ASSEMBLY HAS TO COMPLY WITH CORRESPONDING EMC- AND SAFETY-REGULATIONS.
pdf CB:http://www.zippy.com.tw//backend/DownLoad/DownLoad/Power/CB/M1P-V%20&%20M1P2-V%20&%20M1P4-V%20%20CB.pdf TUV:http://www.zippy.com.tw//backend/DownLoad/DownLoad/Power/TUV/M1P-V%20&%20M1P2-V%20&%20M1P4-V%20TUV.pdf CCC:http://www.zippy.com.tw//backend/DownLoad/DownLoad/Power/CCC/M1P-V%20&%20M1P2-V%20&%20M1P4-V%20CCC.pdf
製品一覧へ戻る

Search by Subject 課題から探す

課題から探す一覧