製品情報

M1K4-7BG0V0H(2700W)

製品種別 電源 (Zippy)
電源の種類 N+1 Redundant
製品説明

製品仕様

wattage 2700W
solution Server ,Workstation ,Storage System ,IPC ,Communication ,Networking
dimension_mm 450x219x45.5
dimension_inch 17.72x8.62x1.79
input_spec VOLTAGE: AC Input Voltage, Frequency and Current (Rating: 100V-240Vac, 47-63Hz, 15-8A) FREQUENCY: 47~63HZ INRUSH CURRENT (PER SET): 15/30 AMPS@115/230VAC Power factor correction / Current Harmonics: PFC can reach the target of 95% @110V,full load, following the standard Of EN 61000-3-2 Efficiency(per set): Typical 83% at 115V,12V/83A,5VSB/0.1A; typical 86% at 230V,12V/83A,5VSB/0.1A
dc_output Output VoltageOutput Current Min.Output Current Max.Regulation LoadRegulation LineOutput Ripple & Noise Max.[P-P]+5V1027±5%±1%50mV+5V2027±5%±1% 50mV +5V3027±5%±1%50mV+3.3V031±5%±1%50mV+12V2225±5%±1%120mV-12V00.5±5%±1%120mV+5VSB0.13±5%±1%50mV
*+5V1 AND +3.3V TOTAL MAX:210W *+5V2 AND +5V3 TOTAL MAX:270W *+5V1~+5V3 are not able to have parallel connection *Total output power not exceed:2700W(MAX)

features * TEMPERATURE RANGE:OPERATING 0℃~50℃,STORAGE -20℃~80℃
* OVER POWER PROTECTION
* OVER VOLTAGE PROTECTION
* SHORT CIRCUIT PROTECTION
* SAFETY:TO MEET UL, CUL, TUV, CCC
* The power supply shall be designed to meet the following standards a. EN 61000-4-2(ESD) Criterion B, ± 4KV by contact, ±8KV by air. b. EN 61000-4-4(EFT) Criterion B, ± 1KV. c. EN 61000-4-5(SURGE) Criterion B, Line-Line ± 1KV Line-Earth ± 2KV.


* THE POWER-SUPPLY IS FOR CHASSIS-ASSEMBLY ONLY AND IS NOT ALLOWED TO BE OPERATED AS STAND-ALONE COMPONENT. FINAL ASSEMBLY HAS TO COMPLY WITH CORRESPONDING EMC- AND SAFETY-REGULATIONS.
pdf DRAWING:http://www.zippy.com.tw//backend/DownLoad/DownLoad/Power/DRAWING/M1K4MA02.pdf