M1V2-5801V4H(800W)
製品種別 | 電源 (Zippy) |
---|---|
電源の種類 | Micro Redundant |
製品説明 |
製品仕様
wattage | 800W |
---|---|
solution | Server ,Workstation ,Storage System |
dimension_mm | 355x106x41.8 |
dimension_inch | 13.98x4.17x1.65 |
input_spec | VOLTAGE: 90~264VAC FULL RANGE FREQUENCY: 47~63HZ INPUT CURRENT:6A(RMS)FOR 230VAC 12A(RMS)FOR 115VAC INRUSH CURRENT:15A MAX. FOR 115 VAC PER MODULE 30A MAX. FOR 230 VAC PER MODULE |
dc_output |
* POWER MODULE TOTAL OUTPUT POWER NOT EXCEED 800W |
features | * TEMPERATURE RANGE:OPERATING 0℃~50℃,STORAGE -20℃~80℃ * HOLD UP TIME:11mS MIN. AT FULL LOAD & 115 VAC INPUT VOLTAGE * DIELECTRIC WITHSTAND:INPUT/OUTPUT 1500 VAC FOR 1 MINUTE * INPUT TO FRAME GROUND 1500 VAC FOR 1 minute * EFFICIENCY:TYPICAL 85% AT 115V, 12V/66A 5VSB/1.6A; TYPICAL 88% AT 230V, 12V/66A 5VSB/1.6A * POWER GOOD SIGNAL:ON DELAY 100mS TO 500mS,OFF DELAY 1mS * OVER POWER PROTECTION:105~150% MAX * OVER VOLTAGE PROTECTION:+3.3V→3.7~4.1V, +5V→5.7~6.5V, +12V→12.8~13.9V * SHORT CIRCUIT PROTECTION: +5V, +3.3V, +12V, -12V * SAFETY:TO MEET UL, CUL, TUV * FAULTY ALARM METHODS: LED, BUZZER, TTL SIGNAL * MEET IEC-1000-3-2 CLASS D (ACTIVE PFC) *THE POWER-SUPPLY IS FOR CHASSIS-ASSEMBLY ONLY AND IS NOT ALLOWED TO BE OPERATED AS STAND-ALONE COMPONENT. FINAL ASSEMBLY HAS TO COMPLY WITH CORRESPONDING EMC- AND SAFETY-REGULATIONS. |
DRAWING:http://www.zippy.com.tw//backend/DownLoad/DownLoad/Power/DRAWING/M1V2MA01.pdf TUV:http://www.zippy.com.tw//backend/DownLoad/DownLoad/Power/TUV/M1U-V%20&%20M1U2-V%20TUV.pdf |