DM1Y2-5300V2H(300W)
製品種別 | 電源 (Zippy) |
---|---|
電源の種類 | Micro Redundant DC |
製品説明 |
製品仕様
wattage | 300W |
---|---|
solution | Server ,Workstation ,Storage System ,IPC ,Communication ,Networking |
dimension_mm | 275x106x41.3 |
dimension_inch | 10.83x4.17x1.63 |
input_spec | VOLTAGE:-36 ~ -72VDC FREQUENCY:DC STEADY-STATE CURRENT: 11/6AMP (8AMP AT 48VDC) INRUSH CURRENT: 40A MAX. @-48VDC INPUT (AT 25DEGREES AMBIENT COLD START) |
dc_output |
* POWER MODULE TOTAL OUTPUT POWER NOT EXCEED 300W |
features | * TEMPERATURE RANGE:OPERATING 0℃~50℃, STOREAGE -20℃~80℃ * HOLD UP TIME:1.6mS MIN. AT FULL LOAD & NOMINAL INPUT VOLTAGE * EFFICIENCY: POWER SUPPLY EFFICIENCY TYPICAL 80% AT -48VDC * OVER POWER PROTECTION: 110~160% * OVER VOLTAGE PROTECTION:+3.3V→3.7V~4.3V,+5V→5.7V~6.5V,+12V→13.3 V~15V * SHORT CIRCUIT PROTECTION: +5V, +3.3V, +12V, -12V * REMOTE ON / OFF CONTROL * REMOTE SENSING DESIGN * BALANCE LOAD SHARING DESIGN * HOT-SWAPPABLE/HOT PLUGGABLE REDUNDANCY FUNCTION * ISOLATION: BUILT-IN THE POWER MODULE * FAULTY ALARM METHODS: LED, BUZZER, TTL SIGNAL * EMI NOISE FILTER: FCC CLASS A , CISPR 22 CLASS A * SAFETY:TO MEET UL, CUL, TUV, CCC *THE POWER-SUPPLY IS FOR CHASSIS-ASSEMBLY ONLY AND IS NOT ALLOWED TO BE OPERATED AS STAND-ALONE COMPONENT. FINAL ASSEMBLY HAS TO COMPLY WITH CORRESPONDING EMC- AND SAFETY-REGULATIONS. |
MTBF(RoHS):http://www.zippy.com.tw//backend/DownLoad/DownLoad/Power/MTBF/DM1Y2-5300V2H(RoHS).pdf DRAWING:http://www.zippy.com.tw//backend/DownLoad/DownLoad/Power/DRAWING/DM1Y2VMA00.pdf CB:http://www.zippy.com.tw//backend/DownLoad/DownLoad/Power/CB/DM1Y%20and%20DM1Y2%20CB.pdf TUV:http://www.zippy.com.tw//backend/DownLoad/DownLoad/Power/TUV/DM1Y-V%20&%20DM1Y2-V%20TUV.pdf CE(Radiation):http://www.zippy.com.tw//backend/DownLoad/DownLoad/Power/CE/DM1Y2-5300V2H%20(Radiation).pdf FCC:http://www.zippy.com.tw//backend/DownLoad/DownLoad/Power/FCC/DM1Y2-5300V2H%20FCC.pdf CCC:http://www.zippy.com.tw//backend/DownLoad/DownLoad/Power/CCC/DM1Y2-V%20CCC.pdf |