製品情報

DM1U2-5751V4H(750W)

製品種別 電源 (Zippy)
電源の種類 Micro Redundant DC
製品説明

製品仕様

wattage 750W
solution Server ,Workstation ,Storage System ,IPC ,Communication
dimension_mm 355x106x41.8
dimension_inch 13.98x4.17x1.65
input_spec VOLTAGE:-40 ~ -72VDC FREQUENCY: 0HZ (DC)STEADY-STATE CURRENT: 24/14 AMPS MAXIMUM AT ANY LOW/HIGH RANGE INPUT VOLTAGEINRUSH CURRENT: 10A MAX. @-48VDC INPUT(AT 25 DEGREES AMBIENT COLD START)START UP CURRENT: 20 AMPS MAX. @ -48VDC INPUT(AT 25 DEGREES AMBIENT COLD START)
dc_output Output VoltageOutput Current Min.Output Current Max.Regulation LoadRegulation LineOutput Ripple & Noise Max.[P-P]+5V035±5%±50mV50mV+12V262±5%±120mV 120mV -12V00.5±5%±120mV120mV+3.3V031±5%±50mV50mV+5VSB0.13±5%±50mV50mV
* POWER MODULE TOTAL OUTPUT POWER OF +5V AND +3.3V NOT EXCEED 210W
* POWER MODULE TOTAL OUTPUT POWER NOT EXCEED 750W


features * TEMPERATURE RANGE:OPERATING 0℃~50℃, STOREAGE -20℃~80℃
* HOLD UP TIME:WHEN POWER SHUTDOWN ALL DC OUTPUT MUST BE MAINTAIN 1mS IN REGULATION LIMIT AT -48V
* EFFICIENCY(PER SET):Typical 85 % at 115V,12V/62A 5VSB/0.4A; Typical 88 % at 230V,12V/62A 5VSB/0.4A
* OUTPUT PROTECTION: OPP / OVP / OCP / SCP
* REMOTE ON / OFF CONTROL
* REMOTE SENSING DESIGN
* BALANCE LOAD SHARING DESIGN
* HOT-SWAPPABLE/HOT PLUGGABLE REDUNDANCY FUNCTION
* ISOLATION: BUILT-IN THE POWER MODULE
* SAFETY: TO MEET UL, CUL, TUV

* THE POWER-SUPPLY IS FOR CHASSIS-ASSEMBLY ONLY AND IS NOT ALLOWED TO BE OPERATED AS STAND-ALONE COMPONENT. FINAL ASSEMBLY HAS TO COMPLY WITH CORRESPONDING EMC- AND SAFETY-REGULATIONS.