MP1S-5300V(300W)
| 製品種別 | 電源 (Zippy) |
|---|---|
| 電源の種類 | Medical IEC-60601 |
| 製品説明 |
製品仕様
| wattage | 300W |
|---|---|
| solution | Server ,Workstation ,Storage System ,IPC |
| dimension_mm | 190x81.5x40.3 |
| dimension_inch | 7.48x3.21x1.59 |
| input_spec | INPUT CHARACTERISTICS：VOLTAGE：90～264VAC FULL RANGE FREQUENCY： 47～63HZ INPUT CURRENT：4.5A (RMS) FOR 115 VAC / 2.0A (RMS) FOR 230 VAC INRUSH CURRENT：70A MAX. FOR 115 VAC / 140A MAX. FOR 230 VAC POWER FACTOR CORRECTION: PFC CAN REACH THE TARGET OF 95% AT 115/230VAC, FULL LOAD |
| dc_output |
|
| features | ‧TEMPERATURE RANGE：OPERATING 0℃～40℃, STORAGE –20℃~80℃ ‧HOLD UP TIME：16mS MINIMUM AT FULL LOAD & NOMINAL INPUT VOLTAGE ‧EFFICIENCY：80~84% TYPICAL AT 115V, FULL LOAD ‧POWER GOOD SIGNAL：ON DELAY 100mS TO 500mS，OFF DELAY 1mS ‧OVER POWER PROTECTION：110～160% MAX ‧OVER VOLTAGE PROTECTION: +3.3V→3.6~4.3V, +5V→5.6~6.5V, +12V→13.2~15V ‧OVER CURRENT PROTECTION; +3.3V→18.7~27.2A, +5V→19.8~28.8A, +12V→>26.4~38.4 ‧SHORT CIRCUIT PROTECTION: +5V, +3.3V, +12V, -12V, +5VSB ‧SAFETY : TO MEET UL60601, TUV EN-60601, RFI/EMI STANDARDS ‧EMI NOISE FILTER: FCC CLASS B, CISPR22(EN55022) CLASS B ‧COOLING: 40mm DC FAN *THE POWER-SUPPLY IS FOR CHASSIS-ASSEMBLY ONLY AND IS NOT ALLOWED TO BE OPERATED AS STAND-ALONE COMPONENT. FINAL ASSEMBLY HAS TO COMPLY WITH CORRESPONDING EMC- AND SAFETY-REGULATIONS. |
| CB:http://www.zippy.com.tw//backend/DownLoad/DownLoad/Power/CB/MP1S-V%20CB.pdf TUV:http://www.zippy.com.tw//backend/DownLoad/DownLoad/Power/TUV/MP1S-V%20EN60601-1-2006%20TUV.pdf MTBF(RoHS):http://www.zippy.com.tw//backend/DownLoad/DownLoad/Power/MTBF/MP1S-5300V(RoHS).pdf CCC:http://www.zippy.com.tw//backend/DownLoad/DownLoad/Power/CCC/MP1S-V%20CCC.pdf CE:http://www.zippy.com.tw//backend/DownLoad/DownLoad/Power/CE/MP1S-5300V%20(Radiation).pdf FCC:http://www.zippy.com.tw//backend/DownLoad/DownLoad/Power/FCC/MP1S-5300V%20FCC.pdf |
