MP1S-6400V(400W)
製品種別 | 電源 (Zippy) |
---|---|
電源の種類 | Medical IEC-60601 |
製品説明 |
製品仕様
wattage | 400W |
---|---|
solution | Server ,Workstation ,Storage System ,IPC |
dimension_mm | 250x81.5x40.3 |
dimension_inch | 9.84x3.21x1.59 |
input_spec | INPUT CHARACTERISTICS:VOLTAGE:90~264VAC FULL RANGE FREQUENCY: 47~63HZ INPUT CURRENT:4.5A (RMS) FOR 115 VAC / 2.0A (RMS) FOR 230 VAC INRUSH CURRENT:70A MAX. FOR 115 VAC / 140A MAX. FOR 230 VAC POWER FACTOR CORRECTION: PFC CAN REACH THE TARGET OF 95% AT 115/230VAC, FULL LOAD |
dc_output |
* TOTAL POWER: 400W |
features | ‧TEMPERATURE RANGE:OPERATING 0℃~40℃, STORAGE –20℃~80℃ ‧HOLD UP TIME:10mS MINIMUM AT FULL LOAD & NOMINAL INPUT VOLTAGE ‧EFFICIENCY:78~82% TYPICAL AT 115V, FULL LOAD ‧POWER GOOD SIGNAL:ON DELAY 100mS TO 500mS,OFF DELAY 1mS ‧OVER POWER PROTECTION:110~160% MAX ‧OVER VOLTAGE PROTECTION: +3.3V→3.6~4.3V, +5V→5.6~6.5V, +12V→13.2~15V ‧OVER CURRENT PROTECTION; +3.3V→11~16A, +5V→13.2~19.2A, +12V→ >16A, ‧SHORT CIRCUIT PROTECTION: +5V, +3.3V, +12V, -12V, +5VSB ‧SAFETY : TO MEET UL, TUV, RFI/EMI STANDARDS ‧EMI NOISE FILTER: FCC CLASS B, CISPR22(EN55022) CLASS B *THE POWER-SUPPLY IS FOR CHASSIS-ASSEMBLY ONLY AND IS NOT ALLOWED TO BE OPERATED AS STAND-ALONE COMPONENT. FINAL ASSEMBLY HAS TO COMPLY WITH CORRESPONDING EMC- AND SAFETY-REGULATIONS. |
DRAWING:http://www.zippy.com.tw//backend/DownLoad/DownLoad/Power/DRAWING/MP1SMA02.pdf CB:http://www.zippy.com.tw//backend/DownLoad/DownLoad/Power/CB/MP1S-V%20CB.pdf TUV:http://www.zippy.com.tw//backend/DownLoad/DownLoad/Power/TUV/MP1S-V%20EN60601-1-2006%20TUV.pdf MTBF(RoHS)(40℃):http://www.zippy.com.tw//backend/DownLoad/DownLoad/Power/MTBF/MP1S-6400V(RoHS)(40%e2%84%83).pdf MTBF(RoHS):http://www.zippy.com.tw//backend/DownLoad/DownLoad/Power/MTBF/MP1S-6400V(RoHS).pdf FCC:http://www.zippy.com.tw//backend/DownLoad/DownLoad/Power/FCC/MP1S-6400V%20FCC.pdf CE(Radiation):http://www.zippy.com.tw//backend/DownLoad/DownLoad/Power/CE/MP1S-6400V%20(Radiation).pdf |