M1W1-5A10V3H(1010W)
| 製品種別 | 電源 (Zippy) |
|---|---|
| 電源の種類 | Easy Swap |
| 製品説明 |
製品仕様
| wattage | 1010W |
|---|---|
| solution | Server ,Workstation ,Storage System ,IPC ,Blade server ,PCs ,Communication |
| dimension_mm | 320x98.4x40 |
| dimension_inch | 12.6x3.87x1.57 |
| input_spec | VOLTAGE: 90~264 VAC FULL RANGE FREQUENCY: 47 ~ 63 Hz INPUT CURRENT: 15 / 7.5 A FOR 115 / 230 VAC INRUSH CURRENT: 15 / 30 AMPS @115/230VAC. HIGH FREQUENCY PEAK AMPLITUDES LASTING LESS THAN 200US(AT 25DEGREES AMBIENT COLD START FOR EACH POWER UNIT) |
| dc_output |
|
| features | * TEMPERATURE RANGE: OPERATING 0℃ --- 50℃, STORAGE –20℃ --- 80℃; OPERATING TEMPERATURE FROM 0℃ SHOULD START FROM AC 90V * HOLD UP TIME: 16 ms MINIMUM AT FULL LOAD & 90 VAC INPUT VOLTAGE * EFFICIENCY: TYPICAL 84% AT 115V, 86% AT 230V, FULL LOAD * POWER GOOD SIGNAL: ON DELAY 100 ms TO 500 ms, OFF DELAY 1 ms * OVER POWER PROTECTION: 110~150% * OVER VOLTAGE PROTECTION: +3.3V→3.7~4.1V, +5V→5.7~6.5V, +12V→12.8~13.9V * OVER CURRENT PROTECTION: THE POWER SUPPLY SHALL LATCH OFF IF THE +12V OUTPUT CURRENTS ARE OVER IT’S LIMITATION. THE LIMITED CURRENT IS OVER 110~150% FOR EACH POWER MODULE. * SHORT CIRCUIT PROTECTION: +5V, +3.3V, +12V OUTPUT TO DC RETURN SHALL CAUSE NO DAMAGE AND POWER SUPPLY LATCH, -12V SHORT CIRCUIT TO DC RETURN SHALL CAUSE NO DAMAGE. * SAFETY: MEET UL, CUL, TÜV * MEET IEC-1000-3-2 CLASS D *THE POWER-SUPPLY IS FOR CHASSIS-ASSEMBLY ONLY AND IS NOT ALLOWED TO BE OPERATED AS STAND-ALONE COMPONENT. FINAL ASSEMBLY HAS TO COMPLY WITH CORRESPONDING EMC- AND SAFETY-REGULATIONS. |
| DRAWING:http://www.zippy.com.tw//backend/DownLoad/DownLoad/Power/DRAWING/M1W1VMA00.pdf |
