KIN1-5A00V4D(1000W)
製品種別 | 電源 (Zippy) |
---|---|
電源の種類 | Easy Swap |
製品説明 |
製品仕様
wattage | 1000W |
---|---|
solution | Server ,Workstation ,Storage System ,IPC ,Blade server ,Communication |
dimension_mm | 397x79x40 |
dimension_inch | 15.63x3.11x1.57 |
input_spec | VOLTAGE: 90~264VAC(OUTPUT:1000W); 180~264VAC(OUTPUT: 1200W) FULL RANGE FREQUENCY: 47~63HZ INPUT CURRENT:9A(RMS)FOR 230VAC, 15A(RMS)FOR 115VAC INRUSH CURRENT:25A MAX. FOR 115 VAC PER MODULE, 50A MAX. FOR 230 VAC PER MODULE PFC CAN REACH THE TARGET OF 95% @110V, FULL LOAD, FOLLOWING THE STANDARD OF EN 610003-2, CLASS D. |
dc_output |
* TOTAL OUTPUT POWER OF V1 AND V2 NOT EXCEED 1000W * THE OUTPUT POWER OF 5V & 3.3V NOT EXCEED 190W |
features | * TEMPERATURE RANGE:OPERATING 0℃~40℃,STORAGE -20℃~80℃ * HOLD UP TIME:WHEN POWER SHUTDOWN DC OUTPUT 5V MUST BE MAINTAIN 16mSEC IN REGULATON LIMIT AT NORMAL INPUT VOLTAGE. * EFFICIENCY:TYPICAL 88%(MAX) at 230V * POWER GOOD SIGNAL:ON DELAY 100mS TO 500mS,OFF DELAY 1Ms * OVER POWER PROTECTION:110~160% MAX * OVER VOLTAGE PROTECTION: +3.3V1 & +3.3V2→3.9~4.6V, +5V1 & +5V2→5.8~6.9V, +12V1 & +12V2→13.9~16.4V * SHORT CIRCUIT: +5V, +3.3V, +12V, -12V, +5VSB * OVER CURRENT PROTECTION: +3.3V1 & +3.3V2→35.2~48A, +5V1 & +5V2→35.2~48A, +12V1 & +12V2→91.3~124.5A * LEAKAGE CURRENT: 3.5MA. MAX. AT NOMINAL VOLTAGE 250VAC * REMOTE ON/OFF CONTROL * SAFETY:TO MEET UL&CUL, TUV, CCC *THE POWER-SUPPLY IS FOR CHASSIS-ASSEMBLY ONLY AND IS NOT ALLOWED TO BE OPERATED AS STAND-ALONE COMPONENT. FINAL ASSEMBLY HAS TO COMPLY WITH CORRESPONDING EMC- AND SAFETY-REGULATIONS. |