BN2G-5850V(850W)
| 製品種別 | 電源 (Zippy) |
|---|---|
| 電源の種類 | 2U Single |
| 製品説明 |
製品仕様
| wattage | 850W |
|---|---|
| solution | Server ,Workstation ,IPC ,Communication |
| dimension_mm | 240x100x70 |
| dimension_inch | 9.45x3.94x2.76 |
| input_spec | VOLTAGE: 18 ~ 36 VDC INPUT CURRENT: 18~36VDC / 42~30AMP(42A AT 24VDC) INRUSH CURRENT: 100AMPS @24VDC (AT 25DEGREES AMBIENT COLD START) |
| dc_output |
TOTAL OUTPUT MAX: 850W (AT 18~23V ONLY 600W) |
| features | * TEMPERATURE RANGE: OPERATING 0℃ ~ 40℃, STORAGE -20~80℃ * HOLD UP TIME: 1 ms MINIMUM AT FULL LOAD & NOMINAL INPUT VOLTAGE * EFFICIENCY: >80% TYPICAL AT DC 24V INPUT, FULL LOAD * POWER GOOD SIGNAL: ON DELAY 100 ms TO 500 ms, OFF DELAY 1 ms * OVER POWER PROTECTION: 110~160% * OVER VOLTAGE PROTECTION: +5V: 5.6~6.5V, +12V: 13.2~15V, +3.3V: 3.6~4.3V * OVER CURRENT PROTECTION: +3.3V→27.5~40A, +5V→27.5~40A, +12V→77~112A * SHORT CIRCUIT PROTECTION: +5V, +3.3V, +12V, -12V, AUTO-RECOVERED: +5VSB * REMOTE ON/OFF CONTROL * EMI NOISE FILTER: FCC CLASS A, CISPR22 CLASS A * SAFETY: TO MEET UL, TUV, CB *THE POWER-SUPPLY IS FOR CHASSIS-ASSEMBLY ONLY AND IS NOT ALLOWED TO BE OPERATED AS STAND-ALONE COMPONENT. FINAL ASSEMBLY HAS TO COMPLY WITH CORRESPONDING EMC- AND SAFETY-REGULATIONS. |
