G1W2-5860V3V(860W)
| 製品種別 | 電源 (Zippy) |
|---|---|
| 電源の種類 | 2U Redundant |
| 製品説明 |
製品仕様
| wattage | 860W |
|---|---|
| solution | Server ,Workstation ,Storage System ,IPC |
| dimension_mm | 300x101.2x84 |
| dimension_inch | 11.81x3.98x3.31 |
| input_spec | VOLTAGE: 90V ~ 264VAC (WITH ± 10% TOLERANCE) FREQUENCY: 47Hz ~ 63Hz INPUT CURRENT: 13/6.5A MAX AT ANY LOW/HIGH INPUT VOLTAGE INRUSH CURRENT: 60/80A @ 115/230VAC (25℃) POWER FACTOR CORRECTION: 95% @ 110V, FULL LOAD |
| dc_output |
TOTAL OUTPUT MAX: 860W |
| features | * TEMPERATURE RANGE: OPERATING: 0℃ ~ 40℃, STORAGE: -20℃ ~ 80℃ * HOLD UP TIME: 16 ms MINIMUM AT FULL LOAD & NORMAL INPUT VOLTAGE * EFFICIENCY: >80% TYPICAL AT 115 VAC FULL LOAD * POWER GOOD SIGNAL: ON DELAY 100 ms TO 500 ms, OFF DELAY 1 ms * REMOTE ON/OFF CONTROL * OVER POWER PROTECTION:110%~150% * OVER VOLTAGE PROTECTION: +5V→5.7~6.2V, +3.3V→3.7~4.1V, +12V→13.3~14.3V; * SHORT CIRCUIT: +5V, +3.3V, +12V, -12V, +5VSB * OVER CURRENT PROTECTION: +5V→35~48A, +12V→77~105A, +3.3V→35~48A * SAFETY: TO MEET UL, CUL, TUV, CB * LEAKAGE CURRENT: 3.5 MA. MAX. AT NOMINAL VOLTAGE 250VAC * EMI NOISE FILTER: FCC CLASS A, CISPR22 CLASS A * WARMING METHOD: BUZZER SOUND, TTL, FAULT LED *THE POWER-SUPPLY IS FOR CHASSIS-ASSEMBLY ONLY AND IS NOT ALLOWED TO BE OPERATED AS STAND-ALONE COMPONENT. FINAL ASSEMBLY HAS TO COMPLY WITH CORRESPONDING EMC- AND SAFETY-REGULATIONS. |
| DRAWING:http://www.zippy.com.tw//backend/DownLoad/DownLoad/Power/DRAWING/G1W2MA00.pdf CB:http://www.zippy.com.tw//backend/DownLoad/DownLoad/Power/CB/T1W2-V,%20CDW2-V,C2W,G1W2-V%20CB.pdf TUV:http://www.zippy.com.tw//backend/DownLoad/DownLoad/Power/TUV/T1W2-V,%20CDW2-V,G1W2-V,G1F2-V%20TUV.pdf CCC:http://www.zippy.com.tw//backend/DownLoad/DownLoad/Power/CCC/T1W2-V,%20CDW2-V,G1W2-V%20CCC.pdf MTBF(RoHS):http://www.zippy.com.tw//backend/DownLoad/DownLoad/Power/MTBF/G1W2-5860V3V(RoHS).pdf BSMI:http://www.zippy.com.tw//backend/DownLoad/DownLoad/Power/BSMI/G1W2%20BSMI.pdf |
