DG1W2-5960V3V(960W)
| 製品種別 | 電源 (Zippy) |
|---|---|
| 電源の種類 | 2U Redundant DC |
| 製品説明 |
製品仕様
| wattage | 960W |
|---|---|
| solution | Server ,Workstation ,Storage System |
| dimension_mm | 300x101.2x84 |
| dimension_inch | 11.81x3.98x3.31 |
| input_spec | VOLTAGE: -36 ~ -72 VDC STEADY-STATE CURRENT: -36~-72VDC / 36-17 AMP(26 AMP @ -48VDC) INRUSH CURRENT: 80AMPS @ -48VDC |
| dc_output |
|
| features | * TEMPERATURE RANGE: OPERATING 0℃ ~ 40℃,STORAGE -20℃ ~ 80℃ * HOLD UP TIME: 1.6 ms MINIMUM AT FULL LOAD & -48VDC INPUT VOLTAGE * EFFICIENCY: TYPICAL >80% @ DC-48 INPUT, FULL LOAD * POWER GOOD SIGNAL: ON DELAY 100 ms TO 500 ms, OFF DELAY 1 ms * OUTPUT PROTECTION: OPP / OVP / SCP / OCP * BALANCE LOAD SHARING DESIGN * REMOTE ON/OFF CONTROL * HOT-SWAPPABLE/HOT PLUGGABLE REDUNDANCY FUNCTION * ISOLATION: BUILT-IN THE POWER MODULE * 3.3V / 5V REMOTE SENSING * WARNING METHOD: AUDIO ALARM, FAULT LED, TTL * SAFETY APPROVAL: UL, CUL, TUV * EMI: IEC61000-3-2, FCC, CISPR 22(EN 55022) * EMS: EN 61000-4-2 ESD, EN61000-4-4 EFT, EN61000-4-5 SURGE * THE POWER-SUPPLY IS FOR CHASSIS-ASSEMBLY ONLY AND IS NOT ALLOWED TO BE OPERATED AS STAND-ALONE COMPONENT. FINAL ASSEMBLY HAS TO COMPLY WITH CORRESPONDING EMC- AND SAFETY-REGULATIONS. |
| DRAWING:http://www.zippy.com.tw//backend/DownLoad/DownLoad/Power/DRAWING/DG1W2MA00.pdf CB:http://www.zippy.com.tw//backend/DownLoad/DownLoad/Power/CB/DG1W-V%20&%20DG1W2-V%20CB.pdf TUV:http://www.zippy.com.tw//backend/DownLoad/DownLoad/Power/TUV/DG1W-V%20&%20DG1W2-V%20TUV.pdf CCC:http://www.zippy.com.tw//backend/DownLoad/DownLoad/Power/CCC/DG1W2%20CCC.pdf MTBF(RoHS):http://www.zippy.com.tw//backend/DownLoad/DownLoad/Power/MTBF/DG1W2-5960V3V(RoHS).pdf CE:http://www.zippy.com.tw//backend/DownLoad/DownLoad/Power/CE/DG1W2-5960V3V%20(Radiation).pdf FCC:http://www.zippy.com.tw//backend/DownLoad/DownLoad/Power/FCC/DG1W2-5960V3V%20FCC.pdf |
