DM1P2-5500V4V(500W)
| 製品種別 | 電源 (Zippy) |
|---|---|
| 電源の種類 | 2U Redundant DC |
| 製品説明 |
製品仕様
| wattage | 500W |
|---|---|
| solution | Server ,Workstation ,Storage System |
| dimension_mm | 217x85x84 |
| dimension_inch | 8.54x3.35x3.31 |
| input_spec | VOLTAGE：-36 ~ -72VDC STEADY-STATE CURRENT: 14A @ -48VDC INRUSH CURRENT: 40A MAX. @-48VDC INPUT (AT 25DEGREES AMBIENT COLD START) START UP CURRENT: 24AMPS MAX.@28VDC INPUT (AT 25 DEGREES AMBIENT COLD START) |
| dc_output |
|
| features | * TEMPERATURE RANGE：OPERATING 0℃～40℃, STOREAGE -20℃~80℃ * HOLD UP TIME：1mS IN REGULATOIN LIMIT AT NORMAL INPUT VOLTAGE (DC -48V) * EFFICIENCY(PER SET)：POWER SUPPLY EFFICIENCY TYPICAL 80% AT 48VDCin, FULL LOAD * OUTPUT PROTECTION: OPP / OVP / SCP / OCP * REMOTE ON / OFF CONTROL * BALANCE LOAD SHARING DESIGN * HOT-SWAPPABLE/HOT PLUGGABLE REDUNDANCY FUNCTION * ISOLATION: BUILT-IN THE POWER MODULE * FAULTY ALARM METHODS: BUZZER, TTL SIGNAL * EMI: IEC61000-3-2, FCC, CISPR 22(EN 55022) * EMS: EN 61000-4-2 ESD, EN61000-4-4 EFT, EN61000-4-5 SURGE * SAFETY APPROVAL: UL, CUL, TUV, CCC * THE POWER-SUPPLY IS FOR CHASSIS-ASSEMBLY ONLY AND IS NOT ALLOWED TO BE OPERATED AS STAND-ALONE COMPONENT. FINAL ASSEMBLY HAS TO COMPLY WITH CORRESPONDING EMC- AND SAFETY-REGULATIONS. |
| DRAWING:http://www.zippy.com.tw//backend/DownLoad/DownLoad/Power/DRAWING/DM1P2MA00.pdf MTBF(RoHS):http://www.zippy.com.tw//backend/DownLoad/DownLoad/Power/MTBF/DM1P2-5500V4V(RoHS).pdf |
