DM1U2-5650V4V(650W)
| 製品種別 | 電源 (Zippy) |
|---|---|
| 電源の種類 | 2U Redundant DC |
| 製品説明 |
製品仕様
| wattage | 650W |
|---|---|
| solution | Server ,Workstation ,Storage System ,IPC ,Communication |
| dimension_mm | 400x54.5x84.6 |
| dimension_inch | 15.75x2.15x3.39 |
| input_spec | VOLTAGE：-40 ~ -72VDC FREQUENCY： 0HZ (DC) STEADY-STATE CURRENT: 20/10 AMPS MAXIMUM AT ANY LOW/HIGH RANGE INPUT VOLTAGE INRUSH CURRENT: 10A MAX. @-48VDC INPUT(AT 25DEGREES AMBIENT COLD START) START UP CURRENT: 20 AMPS MAX. @ -48VDC INPUT (AT 25DEGREES AMBIENT COLD START) |
| dc_output |
* POWER MODULE TOTAL OUTPUT POWER NOT EXCEED 650W |
| features | * TEMPERATURE RANGE：OPERATING 0℃～50℃, STOREAGE -20℃~80℃ * HOLD UP TIME：WHEN POWER SHUTDOWN ALL DC OUTPUT MUST BE MAINTAIN 1mS IN REGULATION LIMIT AT -48V * EFFICIENCY(PER SET)：TYPICAL 85% AT -48V * OUTPUT PROTECTION: OPP / OVP / OCP / SCP * REMOTE ON / OFF CONTROL * REMOTE SENSING DESIGN * BALANCE LOAD SHARING DESIGN * HOT-SWAPPABLE/HOT PLUGGABLE REDUNDANCY FUNCTION * ISOLATION: BUILT-IN THE POWER MODULE * FAULTY ALARM METHODS: LED, BUZZER, TTL SIGNAL * THE POWER-SUPPLY IS FOR CHASSIS-ASSEMBLY ONLY AND IS NOT ALLOWED TO BE OPERATED AS STAND-ALONE COMPONENT. FINAL ASSEMBLY HAS TO COMPLY WITH CORRESPONDING EMC- AND SAFETY-REGULATIONS. |
