製品情報

BMTW2-5600V3V(600W)

製品種別 電源 (Zippy)
電源の種類 2U Redundant DC
製品説明

製品仕様

wattage 600W
solution Server ,Workstation ,Storage System
dimension_mm 300x101x84
dimension_inch 11.81x3.98x3.31
input_spec VOLTAGE: 19 ~ 36VDC, NOMAL 24VDC STEADY-STATE CURRENT: 45/21AMP MAX AT ANY LOW/HIGH RANGE INPUT VOLTAGE INRUSH CURRENT: 50AMPS @ 24VDC
dc_output Output VoltageOutput Current Min.Output Current Max.Regulation LoadRegulation LineOutput Ripple & Noise Max.[P-P]+5V0.532±5%±1%50mV+12250±5%±1% 120mV -12V00.8±5%±1%120mV+3.3V0.536±5%±1%50mV+5VSB0.13.5±5%±1%50mV
* +5V AND +3.3V TOTAL OUTPUT MAX: 200W
* TOTAL OUTPUT MAX: 600W (AT 18V ONLY 550W)


features * TEMPERATURE RANGE: OPERATING 0℃ ~ 45℃,STORAGE -20℃ ~ 80℃
* HOLD UP TIME: 1 ms MINIMUM AT FULL LOAD & 24VDC INPUT VOLTAGE
* EFFICIENCY: TYPICAL >80% @ 24VDC, 30~100% MAX LOAD
* POWER GOOD SIGNAL: ON DELAY 100 ms TO 500 ms, OFF DELAY 1 ms
* OUTPUT PROTECTION: OPP / OVP / SCP / OCP
* BALANCE LOAD SHARING DESIGN
* REMOTE ON/OFF CONTROL
* HOT-SWAPPABLE/HOT PLUGGABLE REDUNDANCY FUNCTION
* ISOLATION: BUILT-IN THE POWER MODULE
* WARNING METHOD: AUDIO ALARM, FAULT LED, TTL
* SAFETY APPROVAL: UL, CUL, TUV, CCC
* EMI: IEC61000-3-2, FCC, CISPR 22(EN 55022)
* EMS: EN 61000-4-2 ESD, EN61000-4-4 EFT, EN61000-4-5 SURGE


* THE POWER-SUPPLY IS FOR CHASSIS-ASSEMBLY ONLY AND IS NOT ALLOWED TO BE OPERATED AS STAND-ALONE COMPONENT. FINAL ASSEMBLY HAS TO COMPLY WITH CORRESPONDING EMC- AND SAFETY-REGULATIONS.
pdf MTBF(RoHS):http://www.zippy.com.tw//backend/DownLoad/DownLoad/Power/MTBF/BMTW2-5600V3V(RoHS).pdf