H1M-6550P(550W)
| 製品種別 | 電源 (Zippy) |
|---|---|
| 電源の種類 | 1U Single |
| 製品説明 |
製品仕様
| wattage | 550W |
|---|---|
| solution | Server ,Workstation ,Storage System ,IPC ,Blade server |
| dimension_mm | 250x100x40.5 |
| dimension_inch | 9.84x3.94x1.59 |
| input_spec | VOLTAGE: 90 ~ 264 VAC FULL RANGE FREQUENCY:47 ~ 63Hz INPUT CURRENT:7A/11A(RMS) FOR 230/115 VAC INRUSH CURRENT: 90A/130A MAX. FOR 115/230 VAC PER MODULE |
| dc_output |
|
| features | ‧TEMPERATURE RANGE: 0℃---40℃, -20℃---80℃ ‧HUMIDITY:OPERATING:20%-95%, NON-OPERATING:10%-95% ‧REMARKS:85% IS NORMAL CONDITION AND 95% IS WITH SPECIAL COATING PROCESS ‧HOLD UP TIME: 16ms MINIMUM ‧DIELECTRIC WITHSTAND: INPUT/OUTPUT 1500 VAC FOR 1 MINUTE INPUT TO FRAME GROUND 1500 VAC FOR 1 MINUTE ‧HUMIDITY: 10~90%RH ‧EFFICIENCY: 70% TYPICAL AT 115V, AT FULL LOAD ‧POWER GOOD SIGNAL: ON DELAY 100 ms TO 500 ms, OFF DELAY 1ms ‧OVER POWER PROTECTION: 110~160% MAX. ‧OVER VOLTAGE PROTECTION: +5V→5.7V~6.5V, +3.3V→3.7V~4.1V, +12V→12.8V~13.9V ‧EMI NOISE FILTER: FCC CLASS B, CISPR 22 CLASS B ‧SAFETY: TO MEET UL/CSA/TUV STANDARD ‧MEET IEC-1000-3-2 CLASS D *THE POWER-SUPPLY IS FOR CHASSIS-ASSEMBLY ONLY AND IS NOT ALLOWED TO BE OPERATED AS STAND-ALONE COMPONENT. FINAL ASSEMBLY HAS TO COMPLY WITH CORRESPONDING EMC- AND SAFETY-REGULATIONS. |
| CB:http://www.zippy.com.tw//backend/DownLoad/DownLoad/Power/CB/H1M%20&%20P1L%20&%20H3M%20&%20P2M%20CB.pdf TUV:http://www.zippy.com.tw//backend/DownLoad/DownLoad/Power/TUV/H1M%20&%20P1L%20&%20H3M%20&%20P2M%20TUV.pdf MTBF:http://www.zippy.com.tw//backend/DownLoad/DownLoad/Power/MTBF/H1M-6550P.pdf FCC:http://www.zippy.com.tw//backend/DownLoad/DownLoad/Power/FCC/H1M-6550P%20FCC.pdf DRAWING:http://www.zippy.com.tw//backend/DownLoad/DownLoad/Power/DRAWING/H1M0MA00.pdf CE(Radiation):http://www.zippy.com.tw//backend/DownLoad/DownLoad/Power/CE/H1M-6550P%20(+Radiation).pdf |
