PX1-5251P(250W)
| 製品種別 | 電源 (Zippy) |
|---|---|
| 電源の種類 | 1U Single |
| 製品説明 |
製品仕様
| wattage | 250W |
|---|---|
| solution | Server ,Workstation ,Storage System ,IPC ,Communication ,Networking |
| dimension_mm | 190x100x40 |
| dimension_inch | 7.48x3.94x1.57 |
| input_spec | ‧VOLTAGE: 90 ~ 264 VAC FULL RANGE. ‧FREQUENCY: 47 ~ 63 Hz. ‧INPUT CURRENT: 2A (RMS) FOR 230 VAC ‧4A (RMS) FOR 115 VAC ‧INRUSH CURRENT: 65A MAX. FOR 115 VAC ‧130A MAX. FOR 230 VAC |
| dc_output |
|
| features | ‧TEMPERATURE RANGE: OPERATING 0℃ --- 40℃, STORAGE -20℃~80℃ ‧TRANSIENT RESPONSE：OUTPUT VOLTAGE RETURNS IN LESS THAN 1mS MAX. FOLLOWING A 50% LOAD CHANGE ‧HOLD UP TIME: 16mS MINIMUM AT FULL LOAD & NOMINAL INPUT VOLTAGE ‧DIELECTRIC WITHSTANDING: INPUT/OUTPUT 1500 VAC FOR 1 MINUTE INPUT TO FRAM GROUND 1500 VAC FOR 1 MINUTE ‧EFFICIENCY: 68% TYPICAL AT 115VAC, FULL LOAD ‧OVER POWER PROTECTION: 110% ~160% MAX ‧OVER VOLTAGE PROTECTION: +5V→5.6~6.6V, +12V→13.2~14.6V ‧SHORT CIRCUIT PROTECTION：ALL OUTPUT SHORT CIRCUIT PROTECTION ‧EMI NOISE FILTER: FCC CLASS A, CISPR22 CLASS A ‧SAFETY: MEET UL, TUV, RFI/EMI STANDARDS ‧REMOTE ON / OFF CONTROL THE POWER SUPPLY SHALL ACCEPT A LOGIC OPEN COLLECTOR LEVEL WHICH WILL DISABLE/ENABLE ALL THE OUTPUT VOLTAGE (EXCLUDE +5V STAND BY) AS LOGIC LEVEL IS LOW, OUTPUTS VOLTAGE WERE ENABLE AS LOGIC LEVEL IS HIGH, OUTPUTS VOLTAGE WERE DISABLE ‧MEET IEC-1000-3-2 CLASS D ‧LEAKAGE CURRENT: 3.5MA MAX. AT NOMINAL VOLTAGE 250VAC *THE POWER-SUPPLY IS FOR CHASSIS-ASSEMBLY ONLY AND IS NOT ALLOWED TO BE OPERATED AS STAND-ALONE COMPONENT. FINAL ASSEMBLY HAS TO COMPLY WITH CORRESPONDING EMC- AND SAFETY-REGULATIONS. |
| CB:http://www.zippy.com.tw//backend/DownLoad/DownLoad/Power/CB/PX1%20CB.pdf DRAWING:http://www.zippy.com.tw//backend/DownLoad/DownLoad/Power/DRAWING/PX10MA00.pdf FCC:http://www.zippy.com.tw//backend/DownLoad/DownLoad/Power/FCC/PX1-5251P%20FCC.pdf |
