P1U-5400E(400W)
| 製品種別 | 電源 (Zippy) |
|---|---|
| 電源の種類 | 1U Single |
| 製品説明 |
製品仕様
| wattage | 400W |
|---|---|
| solution | Server ,Workstation ,Storage System ,IPC |
| dimension_mm | 190x100x40 |
| dimension_inch | 7.48x3.94x1.57 |
| input_spec | VOLTAGE: 90 ~ 264 VAC FULL RANGE FREQUENCY : 47 ~ 63 HZ INPUT CURRENT: 8/3 AMPS MAXIMUM AT ANY LOW/HIGH RANGE INPUT VOLTAGE. INRUSH CURRENT: 15/30 AMPS @115/220 VAC (AT 25 DEGREES AMBIENT COLD START) |
| dc_output |
1.TOTAL MAX OUTPUT OF +5V AND +3.3V NOT EXCEED 105W 2.POWER MODULE TOTAL OUTPUT POWER NOT EXCEED 400W |
| features | * TEMPERATURE RANGE: OPERATING 0℃ ~ 45℃, STORAGE -20℃~80℃ * EFFICIENCY: POWER SUPPLY EFFICIENCY TYPICAL 88%(+/-2) AT 115V，FULL LOAD. * HOLD UP TIME: WHEN POWER SHUTDOWN DC OUTPUT 5V MUST BE MAINTAIN 16MSEC IN REGULATION LIMIT AT NORMAL INPUT VOLTAGE * HUMIDITY:OPERATING:20%-80%, NON-OPERATING:10%-90% * REMARKS:85% IS NORMAL CONDITION AND 95% IS WITH SPECIAL COATING PROCESS * OPP / OVP / SCP * LEAKAGE CURRENT: 3.5 MA. MAX. AT NOMINAL VOLTAGE 250 VAC * SAFETY: TO MEEET UL, CUL, TUV, CCC * REMOTE ON/OFF CONTROL * ErP READY *THE POWER-SUPPLY IS FOR CHASSIS-ASSEMBLY ONLY AND IS NOT ALLOWED TO BE OPERATED AS STAND-ALONE COMPONENT. FINAL ASSEMBLY HAS TO COMPLY WITH CORRESPONDING EMC- AND SAFETY-REGULATIONS. |
| MTBF(RoHS):http://www.zippy.com.tw//backend/DownLoad/DownLoad/Power/MTBF/P1U-5400E(RoHS).pdf DRAWING:http://www.zippy.com.tw//backend/DownLoad/DownLoad/Power/DRAWING/P1UKMA00.pdf CB:http://www.zippy.com.tw//backend/DownLoad/DownLoad/Power/CB/P1U-5400E%20and%20P1U-5520K%20CB.pdf TUV:http://www.zippy.com.tw//backend/DownLoad/DownLoad/Power/TUV/P1U-5400E%20and%20P1U-5520K%20TUV.pdf CCC:http://www.zippy.com.tw//backend/DownLoad/DownLoad/Power/CCC/P1U-5400E%20&%20P1U-5520K%20CCC.pdf |
