M1P2-5420V4H(420W)
| 製品種別 | 電源 (Zippy) |
|---|---|
| 電源の種類 | 1U Redundant |
| 製品説明 |
製品仕様
| wattage | 420W |
|---|---|
| solution | Server ,Workstation ,Storage System |
| dimension_mm | 230x176x41.8 |
| dimension_inch | 9.06x6.93x1.65 |
| input_spec | VOLTAGE：90 ~ 264VDC FREQUENCY: 47~63HZ STEADY-STATE CURRENT: 7/3A MAX AT ANY LOW/HIGH VOLTAGE INRUSH CURRENT: 40/60A @ 115/230VAC |
| dc_output |
|
| features | * TEMPERATURE RANGE：OPERATING 0℃～40℃, STOREAGE -20℃~80℃ * HOLD UP TIME：16mS IN REGULATOIN LIMIT AT 90VAC INPUT VOLTAGE * EFFICIENCY(PER SET)：POWER SUPPLY EFFICIENCY TYPICAL >80% AT 230V, FULL LOAD * OUTPUT PROTECTION: OPP / OVP / SCP / OCP * REMOTE ON / OFF CONTROL * BALANCE LOAD SHARING DESIGN * HOT-SWAPPABLE/HOT PLUGGABLE REDUNDANCY FUNCTION * ISOLATION: BUILT-IN THE POWER MODULE * FAULTY ALARM METHODS: BUZZER, TTL SIGNAL * EMI: IEC61000-3-2, FCC, CISPR 22(EN 55022) * EMS: EN 61000-4-2 ESD, EN61000-4-4 EFT, EN61000-4-5 SURGE * SAFETY APPROVAL: UL, CUL, TUV, CCC * THE POWER-SUPPLY IS FOR CHASSIS-ASSEMBLY ONLY AND IS NOT ALLOWED TO BE OPERATED AS STAND-ALONE COMPONENT. FINAL ASSEMBLY HAS TO COMPLY WITH CORRESPONDING EMC- AND SAFETY-REGULATIONS. |
| CB:http://www.zippy.com.tw//backend/DownLoad/DownLoad/Power/CB/M1P-V%20and%20M1P2-V%20CB.pdf TUV:http://www.zippy.com.tw//backend/DownLoad/DownLoad/Power/TUV/M1P-V%20&%20M1P2-V%20TUV.pdf CCC:http://www.zippy.com.tw//backend/DownLoad/DownLoad/Power/CCC/M1P-V%20&%20M1P2-V%20CCC.pdf DRAWING:http://www.zippy.com.tw//backend/DownLoad/DownLoad/Power/DRAWING/M1P2VMA01.pdf BSMI:http://www.zippy.com.tw//backend/DownLoad/DownLoad/Power/BSMI/M1P-V%20&%20M1P2-V%20420W%20&%20500W%20BSMI.pdf |
