NEW
AS-1125HS-TNR
| 製品種別 | サーバ |
|---|---|
| CPUソケット数 | 2 |
| CPU | |
| 筐体サイズ | 1U |
| 最大GPU数 | |
| 電源仕様 | リダンダント電源 |
| 用途/特長 | |
| 製品説明 | 主な特徴
第4世代AMD EPYC™ 9004シリーズ・プロセッサー
ASPEED AST2600
24 x DIMMスロット、DDR5 -4800メモリ最大6TB
1 PCIe 5.0 x16、FH、6.6 "L
2 PCIe 5.0 x16 FH、10.5 "L
1つのAIOMネットワークスロット（OCP NIC 3.0互換）
8 ホットスワップ 2.5" NVMe/SAS/SATA2
(オプションで最大12ドライブまで対応)
800/1200Wリダンダント電源（Titanium Level) |
AMD 第4世代 EPYC 9004シリーズについて
Supermicroについて
製品仕様
| Product SKUs | Product SKUs | A+ Server AS -1125HS-TNR (Black front & sliver body) |
|---|---|
| マザーボード | Motherboard | Super H13DSH |
| Processor | CPU | Dual Socket SP5 4th Generation AMD EPYC™ 9004 Series Processor Support CPU TDP up to 360W * |
| Cores | ￥Up to 192C/384T |
| Note | *Certain CPUs with high TDP may be supported only under specific conditions. Please contact Supermicro Technical Support for additional information about specialized system optimization |
| System Memory | Memory | Memory Capacity: 24 DIMM slots Up to 6TB: 3DS ECC Registered RDIMM, DDR5-4800MHz Memory Type: 4800MHz ECC DDR5 RDIMM Up to 512GB of memory |
| Note | For optimal performance AMD recommends full memory population |
| Memory Voltage | 1.1 V |
| Error Detection | Corrects single-bit errors Detects double-bit errors (using ECC memory) |
| On-Board Devices | Chipset | System on Chip |
| Network Connectivity | Via AIOM |
| IPMI | Support for Intelligent Platform Management Interface v.2.0 IPMI 2.0 with virtual media over LAN and KVM-over-LAN support |
| Input / Output | LAN | 1 Dedicated IPMI LAN port |
| USB | 3 USB 3.0 port(s) (1 front; 2 rear) |
| Video | 1 VGA port(s) |
| BIOS | BIOS Type | AMI 256MB SPI Flash |
| BIOS Features | ACPI 6.4 Plug and Play (PnP) SMBIOS 3.5 or later UEFI 2.8 USB Keyboard support |
| マネージメント | Software | IPMIView for Linux/ Windows IPMICFG SSM SPM SUM Watch Dog SuperDoctor® 5 |
| Power Configurations | Power-on mode control for AC power loss recovery ACPI Power Management |
| システム監視機能 | Voltage | System temperature, Memory temperature, CPU temperature, 3.3V standby, +5V standby, +5V, +3.3V, +12V, CPU thermal trip support |
| FAN | Fans with tachometer monitoring Pulse Width Modulated (PWM) fan connectors Status monitor for speed control |
| Temperature | Monitoring for CPU and chassis environment Thermal Control for fan connectors |
| シャーシ | Form Factor | 1U |
| Model | CSE-HS119-R1K24P2-A |
| 外形寸法・重量 | Height | 1.7" (43mm) |
| Width | 17.2" (437mm) |
| Depth | 29.4" (747mm) |
| Package | 8.1" (H) x 23.8" (W) x 40.6" (D) |
| Weight | Net Weight: 32 lbs (14.5 kg) Gross Weight: 51 lbs (23.1 kg) |
| Available Color | Black front & sliver body |
| フロントパネル | Buttons | Power On/Off UID button |
| LEDs | HDD activity LAN1 activity Power status System information |
| Expansion Slots | PCI-Express (PCIe) | 1 PCIe 5.0 x16 FH, 6.6"L slot(s) 2 PCIe 5.0 x16 FH, 10.5"L slot(s) |
| Drive Bays / Storage | Hot-swap | 8x 2.5" hot-swap NVMe/SATA/SAS drive bays (Up to 12x 2.5" hot-swap NVMe/SATA/SAS support with additional parts) |
| M.2 | 2x NVMe (PCIe 3.0 x4, Boot drive only) M-Key, 2280/22110 |
| 冷却機構 | Fans | 8x 4cm heavy duty fans with optimal fan speed control |
| Air Shroud | 2 Air Shroud(s) |
| Power Supply | Power Supply | 1U 800W/1200W Redundant Titanium CRPS w/PMBus power supply |
| Dimension(W x H x L) | 73.5 x 40 x 265 mm |
| AC Input | 800W: 100-127Vac / 9.8A-7A / 50-60Hz 1200W: 200-240Vac / 7.5A-6A / 50-60Hz |
| +12V | Max: 83A / Min: 0A (100Vac-127Vac) Max: 100A / Min: 0A (200Vac-240Vac) |
| 12V SB | Max: 2.1A / Min: 0A |
| Output Type | 25 Pairs Gold Finger Connector |
| Certification | 80plus Titanium |
| 動作環境 | Environmental Spec. | Operating Temperature: 10°C ~ 35°C (50°F ~ 95°F) Non-operating Temperature: -40°C to 70°C (-40°F to 158°F) Operating Relative Humidity: 8% to 90% (non-condensing) Non-operating Relative Humidity: 5% to 95% (non-condensing) |
| Note | Operating Temperature based on configurations |
パーツ仕様
| Standard Parts (Parts Included) | |||
|---|---|---|---|
| 型番 | 数量 | 内容 | |
| Motherboard / Chassis | MBD-H13DSH | 1 | Super H13DSH Motherboard |
| CSE-HS119-R1K24P2-A | 1 | 1U Chassis | |
| Add-on Card / Module | AOM-HS119-IO-P | 1 | Hyper IO Board,RoHS |
| Backplane | BPN-NVME5-HS119N-S8L | 1 | 1U 8-slot backplane support 8x SAS3/SATA3/NVME5 storage devices for Hyper-S platform,RoHS |
| Cable | CBL-GNZ5-1307 | 1 | GNZ4C+ X16 (STR to STR),G5,7CM,85 Ohm,RoHS |
| CBL-MCIO-1221M5RE | 1 | MCIO x8 (STR to RE),21cm,32AWG,G5,RoHS | |
| CBL-MCIO-1228M5RE | 1 | MCIO x8 (STR to RE), 28cm, 30#, Gen5, 85Ohm, RoHS | |
| CBL-PWEX-1142B-20 | 1 | MicroHi (2x4F to 2x4F), PH3.0, 20cm, 8.5A/p,18#,RoHS | |
| CBL-SAST-1225LP | 1 | SlimlineLP x8 (LE) to SlimlineLP x8 (RA),30CM,75/85/100, | |
| CBL-CUSB-1265-119 | 1 | [NR] USB 3.0(F) Type A, RA to USB3.0 20pin,65CM,26/32AWG | |
| CBL-PWCD-0160-IS | 2 | PWCD,US,NEMA5-15P TO IEC60320 C13,6FT,16AWG,RoHS/REACH | |
| Fan | FAN-0216L4-1 | 1 | 40x40x56 mm, 31K-26.6K RPM, Hot Swap, Counter-rotating Fan,, |
| FAN-0216L4-1 | 7 | 40x40x56 mm, 31K-26.6K RPM, Hot Swap, Counter-rotating Fan,, | |
| Drive Tray(s) | MCP-220-00178-0B | 8 | 2.5 thin profile drive tray, Orange tab (for hotswap NVMe drive), for SC119UH |
| Riser Card | RSC-H-66G5L | 1 | 1U LHS Hyper riser card with two PCIe 5.0X16 slots,HF,R |
| RSC-H-6G5L | 1 | 1U LHS Hyper riser card with one PCIe 5.0 X16 slot,HF,R | |
| Software | SFT-OOB-LIC | 1 | License key for enabling OOB BIOS management |
| Heatsink / Retention | SNK-P0082P | 2 | 1U Passive CPU Heat Sink for AMD Socket SP5 Processors |
| *Power Supply | PWS-1K24A-1R | 2 | 1U 800W/1200W Redundant Titanium CRPS w/PMBus power supply, |
| *Front Panel | FPB-FP119UH | 1 | Front control board for 119UHTS 1U Ultra |
| オプションパーツリスト | |||
| 型番 | 数量 | 内容 | |
| 8 NVMe | CBL-MCIO-1359M5FRF | 1 | MCIO x8 (FR to STR), FFC,59cm,30AWG |
| CBL-MCIO-1242M5REL | 1 | MCIO x8 (RE to LE),42cm,30AWG | |
| CBL-MCIO-1356M5FHB | 1 | 2 MCIO x8 (FL to STR),FFC 1/2W,56/43cm bundle,30AWG | |
| 8 NVME + 4 SAS | CBL-CDAT-1062Y-45 | 1 | Picoblade 1.25 (1x4 to 2x 1x4),45cm,26AWG |
| CBL-PWEX-1136-40 | 1 | MicroHi,(2X2 to 2X4) P3.0,40CM,10A/pin,16AWG | |
| MCP-220-00178-0B | 4 | 2.5 thin profile drive tray, Orange tab (for hotswap NVMe drive) | |
| BPN-NVME5-HS119N-S4R | 1 | 1U 4-slot backplane, 4x SAS3/SATA3/NVME5 | |
| CBL-MCIO-1359M5FRF | 1 | MCIO x8 (FR to STR), FFC,59cm,30AWG | |
| CBL-MCIO-1242M5REL | 1 | MCIO x8 (RE to LE),42cm,30AWG | |
| AOC-S3808L-L8iT OR | 1 | 8 int 12Gb/s SAS3 ports, x8 Gen4, HBA - LP, 122 HDD | |
| AOC-S3908L-H8iR | 1 | 8 int 12Gb/s ports, x8 Gen4, ROC - LP, 240 HDD | |
| CBL-SAST-1262LP-100 | 1 | Slimline x8 (STR) to SlimLineLP x4 STR,98CM | |
| CBL-MCIO-1356M5FHB | 1 | 2 MCIO x8 (FL to STR),FFC 1/2W,56/43cm bundle,30AWG | |
| 8 NVME + 4NVME | CBL-MCIO-1356M5FHB | 1 | 2 MCIO x8 (FL to STR),FFC 1/2W,56/43cm bundle,30AWG |
| MCP-220-00178-0B | 4 | 2.5 thin profile drive tray, Orange tab (for hotswap NVMe drive) | |
| BPN-NVME5-HS119N-S4R | 1 | 1U 4-slot backplane, 4x SAS3/SATA3/NVME5 | |
| CBL-MCIO-1343M5FRF | 1 | MCIO x8 (FR to STR), FFC,43cm,30AWG | |
| CBL-MCIO-1352M5FRF | 1 | MCIO x8 (FR to STR), FFC,52cm,30AWG | |
| CBL-MCIO-1359M5FRF | 1 | MCIO x8 (FR to STR), FFC,59cm,30AWG | |
| CBL-CDAT-1062Y-45 | 1 | Picoblade 1.25 (1x4 to 2x 1x4),45cm,26AWG | |
| CBL-MCIO-1242M5REL | 1 | MCIO x8 (RE to LE),42cm,30AWG | |
| CBL-PWEX-1136-40 | 1 | MicroHi,(2X2 to 2X4) P3.0,40CM,10A/pin,16AWG | |
| 8 NVME+ 4 SATA | CBL-MCIO-1242M5REL | 1 | MCIO x8 (RE to LE),42cm,30AWG |
| CBL-MCIO-1255L4Y | 1 | MCIO x8 to 2 SlimSAS LP x4,STR,55cm | |
| CBL-MCIO-1356M5FHB | 1 | 2 MCIO x8 (FL to STR),FFC 1/2W,56/43cm bundle,30AWG | |
| CBL-PWEX-1136-40 | 1 | MicroHi,(2X2 to 2X4) P3.0,40CM,10A/pin,16AWG | |
| MCP-220-00178-0B | 4 | 2.5 thin profile drive tray, Orange tab (for hotswap NVMe drive) | |
| BPN-NVME5-HS119N-S4R | 1 | 1U 4-slot backplane, 4x SAS3/SATA3/NVME5 | |
| CBL-CDAT-1062Y-45 | 1 | Picoblade 1.25 (1x4 to 2x 1x4),45cm,26AWG | |
| CBL-MCIO-1359M5FRF | 1 | MCIO x8 (FR to STR), FFC,59cm,30AWG | |
| 8 SAS | AOC-S3808L-L8iT OR | 1 | 8 int 12Gb/s SAS3 ports, x8 Gen4, HBA - LP, 122 HDD |
| AOC-S3908L-H8iR | 1 | 8 int 12Gb/s ports, x8 Gen4, ROC - LP, 240 HDD | |
| CBL-SAST-1273LP-100 | 1 | Slimline x8 (STR) to 2x SlimLLP x4 STR,69/83CM | |
| 8 SAS + 4 SAS | CBL-CDAT-1062Y-45 | 1 | Picoblade 1.25 (1x4 to 2x 1x4),45cm,26AWG |
| CBL-PWEX-1136-40 | 1 | MicroHi,(2X2 to 2X4) P3.0,40CM,10A/pin,16AWG | |
| MCP-220-00178-0B | 4 | 2.5 thin profile drive tray, Orange tab (for hotswap NVMe drive) | |
| AOC-S3816L-L16iT OR | 1 | 16 int 12Gb/s SAS3 ports, x8 Gen4, HBA - LP, 122 HDD | |
| AOC-S3916L-H16iR | 1 | 16 int 12Gb/s ports, x8 Gen4, ROC - LP, 240 HDD | |
| CBL-SAST-1276F-100 (Support HDD slot 0~7) | 1 | Slimline x8 (LE) to 2x Slimline x4 (STR),FFC,76/76CM | |
| CBL-SAST-1265F-100 (Support HDD slot 8~11) | 1 | Slimline x8 (STR) to Slimline x4 (STR),64CM | |
| BPN-NVME5-HS119N-S4R | 1 | 1U 4-slot backplane, 4x SAS3/SATA3/NVME5 | |
| 8 SATA | CBL-CDAT-1062Y-45 | 1 | Picoblade 1.25 (1x4 to 2x 1x4),45cm,26AWG |
| CBL-MCIO-1255L4Y | 1 | MCIO x8 to 2 SlimSAS LP x4,STR,55cm | |
| 8 SATA + 4 SATA | CBL-PWEX-1136-40 | 1 | MicroHi,(2X2 to 2X4) P3.0,40CM,10A/pin,16AWG |
| MCP-220-00178-0B | 4 | 2.5 thin profile drive tray, Orange tab (for hotswap NVMe drive) | |
| BPN-NVME5-HS119N-S4R | 1 | 1U 4-slot backplane, 4x SAS3/SATA3/NVME5 | |
| CBL-CDAT-1062Y-45 | 1 | Picoblade 1.25 (1x4 to 2x 1x4),45cm,26AWG | |
| CBL-MCIO-1255L4Y | 2 | MCIO x8 to 2 SlimSAS LP x4,STR,55cm | |
| Serial Port DTK Cable with PCIe Bracket | CBL-0010L | 1 | 9-Pin 26CM Serial Port DTK Cable with PCIe Bracket |
