SYS-5019S-M2
| 製品種別 | サーバ |
|---|---|
| CPUソケット数 | |
| CPU | |
| 筐体サイズ | 1U |
| 最大GPU数 | |
| 電源仕様 | シングル電源 |
| 用途/特長 | |
| 製品説明 |
Supermicroについて
製品仕様
| Product SKUs | SYS-5019S-M2 | SuperServer 5019S-M2 (Black) |
|---|---|
| マザーボード | Motherboard | Super X11SSZ-F |
| プロセッサ/キャッシュ | CPU | Single Socket H4 (LGA 1151) supports: Intel® Xeon® processor E3-1200 v6/v5,Intel® 7th/6th Gen Core™ i7/i5/i3,Intel® Pentium®,Intel® Celeron® processors CPU TDP up to 80W |
| Note | BIOS version 2.0 or above is required to support Intel® Xeon® Processor E3-1200 v6 series or 7th Generation Intel® Core™ Processors |
| メモリ | Memory Capacity | 4x 288-pin DDR4 DIMM slots Up to 64GB DDR4 ECC/Non-ECC UDIMM |
| Memory Type | 2400/2133/1866/1600MHz ECC/Non-ECC DDR4 SDRAM 72-bit, 288-pin (UDIMM) gold-plated DIMMs |
| DIMM Sizes | 16GB, 8GB, 4GB |
| Memory Voltage | 1.2 V |
| オンボードデバイス | Chipset | Intel® C236 chipset |
| SATA | 4 SATA3 (6Gbps) ports |
| IPMI | Support for Intelligent Platform Management Interface v.2.0 IPMI 2.0 with virtual media over LAN and KVM-over-LAN support ASPEED AST2400 BMC |
| Network Controllers | Intel® PHY i219LM + Intel® i210AT Gigabit Ethernet LAN Controllers Virtual Machine Device Queues reduce I/O overhead Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output |
| Audio | Front panel header |
| Video | ASPEED AST2400 BMC |
| 標準インターフェース | LAN | 2 RJ45 Gigabit Ethernet LAN ports 1 RJ45 Dedicated IPMI LAN port |
| USB | 4 USB 3.0 ports (2 rear + 2 headers) 9 USB 2.0 ports (2 rear + 6 headers + 1 Type A) |
| Video/Display | 2 DP (Display Port), 1 DVI-I from Intel® HD Graphics, 1 VGA from AST2400 3 Independent Displays from Processor Graphics, VGA is from AST2400 for BMC KVM |
| Serial Port / Header | 2 COM ports (1 front, 1 header) |
| システム監視機能 | Voltage | Monitors for CPU Cores, +3.3V, +5V, +12V, +5V Standby, VBAT, HT, Memory, Chipset Voltages. |
| FAN | Total of 6 fan headers supporting up to 6 fans 4 fans with tachometer status monitoring Status monitor for speed control Status monitor for on/off control Low noise fan speed control Pulse Width Modulated (PWM) fan connectors |
| Temperature | Monitoring for CPU and chassis environment CPU thermal trip support I2C temperature sensing logic Thermal Monitor 2 (TM2) support PECI |
| LED | System Information LED Suspend static indicator LED UID/Remote UID |
| Other Features | Chassis intrusion detection Chassis intrusion header RoHS, Halogen Free |
| シャーシ | Form Factor | 1U Rackmount |
| Model | CSE-813MFTQC-350CB |
| 外形寸法・重量 | Height | 1.7" (43mm) |
| Width | 17.2" (437mm) |
| Depth | 19.85" (503mm) |
| Package | 8.5" (H) x 24" (W) x 29.7" (D) |
| Weight | Gross Weight: 30.4 lbs (13.8 kg) Net Weight: 17.6 lbs (8 kg) |
| Available Colors | Black |
| フロントパネル | Buttons | Power On/Off button System Reset button |
| LEDs | Power LED Hard drive activity LED 2 Network activity LEDs System Information LED |
| 拡張スロット | PCI-Express | 1 PCI-E 3.0 x16 slot |
| ドライブベイ | Hot-swap | 4 Hot-swap 3.5" SATA3 drive bays |
| バックプレーン | Backplane | SAS/SATA HDD Backplane(SAS support requires optional SAS controller) |
| 冷却機構 | Fans | 4x 4cm internal fans |
| 電源 | Power Supply | 350W AC power supply w/ PFC |
| AC Voltage | 100-240 V, 50-60 Hz, 4.2-1.8 Amp |
| +5V | Max.: 15 Amp Min.: 0.2 Amp |
| +5V standby | Max.: 3 Amp Min.: 0 Amp |
| +12V | Max.: 29 Amp Min.: 0.5 Amp |
| -12V | Max.: 0.2 Amp Min.: 0 Amp |
| +3.3V | Max.: 12 Amp Min.: 0.2 Amp |
| Certification | Platinum Level Certified [ Test Report ] |
| BIOS | BIOS Type | 8MB SPI Flash EEPROM with AMI BIOS |
| 動作環境/コンプライアンス | RoHS | RoHS Compliant |
| Environmental Spec. | Operating Temperature: 10°C to 35°C (50°F to 95°F) Non-operating Temperature: -40°C to 70°C (-40°F to 158°F) Operating Relative Humidity: 8% to 90% (non-condensing) Non-operating Relative Humidity: 5% to 95% (non-condensing) |
