AS-2123BT-HNC0R
| 製品種別 | サーバ |
|---|---|
| CPUソケット数 | |
| CPU | |
| 筐体サイズ | 2U |
| 最大GPU数 | |
| 電源仕様 | リダンダント電源 |
| 用途/特長 | |
| 製品説明 |
Supermicroについて
製品仕様
| Product SKUs | AS -2123BT-HNC0R | A+ Server 2123BT-HNC0R (Black) |
|---|---|
| Processor/Chipset (per Node) | CPU | Dual AMD EPYC™ 7001/7002* series Processors (* Board revision 2.x required) Socket SP3 Supports CPU TDP 200W / cTDP up to 200W** |
| Cores | Up to 32 Cores (Board revision 1.x + 7001 Processors) Up to 64 Cores (Board revision 2.x + 7002 Processors) |
| Note ** | Please contact Supermicro Technical Support for specifics on high power processor support |
| System Memory(per Node) | Memory Capacity | 16 DIMM slots Supports up to 2TB Registered ECC DDR4 2666MHz SDRAM (7001 Processors) Supports up to 4TB Registered ECC DDR4 3200MHz SDRAM (Board revision 2.x required + 7002 Processors) 8-channel memory bus For Dual CPUs: Recommended that memory be populated equally in adjacent memory banks |
| Memory Type | DDR4 2666 MHz Registered ECC, 288-pin gold-plated DIMMs (7001 Processors) DDR4 3200 MHz Registered ECC, 288-pin gold-plated DIMMs (Board revision 2.x required + 7002 Processors) |
| Memory Sizes | 8GB, 16GB, 32GB, 64GB, 128GB, 256GB*(* Board revision 2.x required + 7002 processors) |
| Memory Voltage | 1.2V |
| Error Detection | Corrects single-bit errors Detects double-bit errors (using ECC memory) |
| On-Board Devices (per Node) | Chipset | System on Chip |
| SAS | SAS3 (12Gbps) via Broadcom 3008; IT mode |
| Network | 1 PCI-E 3.0 x16 SIOM LAN Networking Slot for flexible networking, see SIOMLAN options support matrix (Must bundle with at least one SIOM network card) |
| IPMI | Support for Intelligent Platform Management Interface v.2.0 IPMI 2.0 with virtual media over LAN and KVM-over-LAN support |
| Video | ASPEED AST2500 BMC |
| Input / Output (per Node) | LAN | Provided via SIOM (optional) 1 RJ45 Dedicated IPMI LAN port |
| USB | 2 USB 3.0 ports (rear) |
| Video | 1 VGA port |
| DOM | 1 SuperDOM (Disk on Module) port |
| Others | 1 COM port (header) 1 TPM 2.0 header |
| System BIOS (per Node) | BIOS Type | AMI 128Mb SPI Flash ROM |
| Management (per Node) | Software | IPMI 2.0 KVM with dedicated LAN SSM, SUM SuperDoctor® 5 Watch Dog |
| Power Configurations | ACPI / APM Power Management |
| シャーシ | Form Factor | 2U Rackmount |
| Model | CSE-217BHQ+-R2K22BP2 |
| 外形寸法・重量 | Width | 17.25" (438mm) |
| Height | 3.47" (88mm) |
| Depth | 28.5" (724mm) |
| Package | 24.33" (W) x 9.57" (H) x 45.08" (D) |
| Weight | Gross Weight: 85 lbs (38.6 kg) Net Weight: 54.5 lbs (24.7 kg) |
| Available Colors | Black |
| Front Panel (per Node) | Buttons | Power On/Off button UID button |
| LEDs | Power status LED HDD activity LED Network activity LEDs Universal Information (UID) LED |
| Expansion Slots (per Node) | PCI-Express | 2 PCI-E 3.0 (x16) Low-profile slots 1 SIOMcard support(must bundle with network card) |
| M.2 | Interface: 1 SATA/PCI-E 3.0 x4 Form Factor: 2280, 22110 Key: M-key |
| Drive Bays (per Node) | Hot-swap | 6 Hot-swap 2.5" SAS3 drive bays or4 NVMe + 2 SAS3 Hot-swap 2.5" |
| 冷却機構 | Fans | 4 Heavy duty 8cm PWM fans |
| 電源 | Total Output Power | 1200W/1800W/1980W/2090/2200W |
| Dimension(W x H x L) | 45 x 40 x 480 mm |
| Input | 1200W: 100-127Vac / 50-60Hz 1800W: 200-220Vac / 50-60Hz 1980W: 220-230Vac / 50-60Hz 2090W: 230-240Vac / 50-60Hz 2090W: 180-220Vac (for UL/cUL only) 2200W: 220-240Vac (for UL/cUL only) 2090W: 230-240Vdc (for CCC only) |
| +12V | Max: 100A / Min: 0A (100-127Vac) Max: 150A / Min: 0A (200-220Vac) Max: 165A / Min: 0A (220-230Vac) Max: 174.17A / Min: 0A (230-240Vac) Max: 174.17A / Min: 0A (180-220Vac, UL/cUL only) Max: 183.33A / Min: 0A (220-240Vac, UL/cUL only) Max: 174.17A / Min: 0A (230-240Vdc, CCC only) |
| 12Vsb | Max: 2.1A / Min: 0A |
| Output Type | Gold Finger |
| Certification | Titanium Level [ Test Report ] |
| 動作環境 | RoHS | RoHS Compliant |
| Environmental Spec. | Operating Temperature: 10°C ~ 30°C (50°F ~ 86°F)* Support for operating above 30°C is available in certain system configurations. Contact your Supermicro sales rep or Technical Support for more details. Non-operating Temperature: -40°C to 60°C (-40°F to 140°F) Operating Relative Humidity: 8% to 90% (non-condensing) Non-operating Relative Humidity: 5% to 95% (non-condensing) |
