| Product SKUs |
| SSG-6039P-E1CR16L |
SuperStorage 6039P-E1CR16L (Black) |
| プロセッサ/キャッシュ |
| CPU |
Dual Socket P (LGA 3647) |
| CPU |
2nd Gen. Intel® Xeon® Scalable Processors (Cascade Lake/Skylake)‡,3 UPI up to 10.4GT/s |
| CPU |
Support CPU TDP 70-205W |
| Cores |
Up to 28 Cores |
| Note |
‡ BIOS version 3.0a or above is required to support 2nd Gen. Intel® Xeon® Scalable processors |
| メモリ |
| Memory Capacity |
16 DIMM slots |
| Memory Capacity |
Up to 4TB 3DS ECC DDR4-2933MHz† RDIMM/LRDIMM |
| Memory Capacity |
Supports Intel® Optane™ DCPMM†† |
| Memory Type |
2933†/2666/2400/2133MHz ECC DDR4 RDIMM/LRDIMM |
| Note |
† 2933MHz in two DIMMs per channel can be achieved by using memory purchased from Supermicro†† Cascade Lake only. Contact your Supermicro sales rep for more info. |
| オンボードデバイス |
| Chipset |
Intel® C622 chipset |
| SAS |
SAS3 (12Gbps) via Broadcom 3008 AOC |
| SAS |
Broadcom 3008 controller |
| SATA |
SATA3 (6Gbps) with RAID 0, 1, 5, 10 |
| Network Controllers |
Dual 10GBase-T LAN ports with Intel X722 + PHY Intel X557 |
| IPMI |
Support for Intelligent Platform Management Interface v.2.0 |
| IPMI |
IPMI 2.0 with virtual media over LAN and KVM-over-LAN support |
| Graphics |
ASPEED AST2500 BMC |
| 標準インターフェース |
| LAN |
2 RJ45 10GBase-T LAN ports |
| LAN |
1 RJ45 Dedicated IPMI LAN port |
| USB |
4 USB 3.0 ports (rear) |
| USB |
1 Type A |
| VGA |
1 VGA port |
| Serial Port / Header |
1 Fast UART 16550 port / 1 Header |
| BIOS |
| BIOS Type |
256Mb AMI UEFI |
| マネージメント |
| Software |
Intel® Node Manager |
| Software |
IPMI 2.0 |
| Software |
NMI |
| Software |
SPM, SUM |
| Software |
SuperDoctor® 5 |
| Software |
Watchdog |
| システム監視機能 |
| CPU |
Monitors for CPU Cores, Chipset Voltages, Memory. |
| CPU |
4+1 Phase-switching voltage regulator |
| FAN |
Fans with tachometer monitoring |
| FAN |
Status monitor for speed control |
| FAN |
Pulse Width Modulated (PWM) fan connectors |
| Temperature |
Monitoring for CPU and chassis environment |
| Temperature |
Thermal Control for fan connectors |
| シャーシ |
| Form Factor |
3U Rackmount |
| Model |
CSE-836BE1C-R1K23B |
| 外形寸法/重量 |
| Width |
17.2" (437mm) |
| Height |
5.2" (132mm) |
| Depth |
25.5" (648mm) |
| Weight |
Gross Weight: 79 lbs (35.8 kg) |
| Weight |
Net Weight: 48 lbs (21.8 kg) |
| Available Colors |
Black |
| フロントパネル |
| Buttons |
Power On/Off button |
| Buttons |
System Reset button |
| LEDs |
Power status LED |
| LEDs |
Hard drive activity LED |
| LEDs |
Network activity LEDs |
| LEDs |
System Information LED |
| LEDs |
Power fail LED |
| 拡張スロット |
| PCI-Express |
3 PCI-E 3.0 x16 slot |
| PCI-Express |
4 PCI-E 3.0 x8 slots |
| PCI-Express |
Slot 2 & 3 occupied by controller and JBOD Expansion Port |
| ドライブベイ |
| Hot-swap |
16 Hot-swap 3.5" SAS3/SATA3 drive bays |
| Optional |
2 Optional Onboard NVMe M.2 |
| 冷却機構 |
| Fans |
3 Hot-swap 8cm redundant PWM cooling fans |
| Fans |
2 Hot-swap 8cm rear exhaust PWM fans |
| Fans |
Redundant cooling |
| Power Supply (76mm Width) |
| Total Output Power |
1000W/1200W |
| Dimension(W x H x L) |
76 x 40 x 336 mm |
| Input |
100-127Vac / 15-12A / 50-60Hz |
| Input |
200-240Vac / 8.5-7A / 50-60Hz |
| Input |
200-240Vdc / 8.5-7A (for CCC only) |
| +12V |
Max: 83A / Min: 0A (100-127Vac) |
| +12V |
Max: 100A / Min: 0A (200-240Vac) |
| +12V |
Max: 100A / Min: 0A (200-240Vdc) |
| +5Vsb |
Max: 4A / Min: 0A |
| Output Type |
19 Pairs Gold Finger Connector |
| Certification |
Titanium Level [ Test Report ] |
| 動作環境 |
| RoHS |
RoHS Compliant |
| Environmental Spec. |
Operating Temperature: 10°C ~ 35°C (50°F ~ 95°F) |
| Environmental Spec. |
Non-operating Temperature: -40°C to 60°C (-40°F to 140°F) |
| Environmental Spec. |
Operating Relative Humidity: 8% to 90% (non-condensing) |
| Environmental Spec. |
Non-operating Relative Humidity: 5% to 95% (non-condensing) |
