| Product SKUs |
| SYS-1029TP-DC0R |
SuperServer 1029TP-DC0R (Black) |
| Processor/Cache(per Node) |
| CPU |
Dual Socket P (LGA 3647) |
| CPU |
2nd Gen. Intel® Xeon® Scalable Processors (Cascade Lake/Skylake)‡,Dual UPI up to 10.4GT/s |
| CPU |
Support CPU TDP 70-145W |
| Cores |
Up to 28 Cores |
| Note |
‡ BIOS version 3.0a or above is required to support 2nd Gen. Intel® Xeon® Scalable processors |
| System Memory(per Node) |
| Memory Capacity |
16 DIMM slots |
| Memory Capacity |
Up to 4TB 3DS ECC DDR4-2933MHz† RDIMM/LRDIMM |
| Memory Type |
2933†/2666/2400/2133MHz ECC DDR4 RDIMM/LRDIMM |
| Note |
† 2933MHz in two DIMMs per channel can be achieved by using memory purchased from Supermicro |
| On-Board Devices (per Node) |
| Chipset |
Intel® C621 chipset |
| SAS |
Broadcom 3008 SAS3 (12Gbps) controller; SW RAID 0, 1, 10 support |
| Network Controllers |
Barebones and Complete System must have at least one SIOMcard installed per node |
| IPMI |
Support for Intelligent Platform Management Interface v.2.0 |
| IPMI |
IPMI 2.0 with virtual media over LAN and KVM-over-LAN support |
| Graphics |
ASPEED AST2500 BMC |
| Input / Output (per Node) |
| SAS |
4 SAS3 (12Gbps) ports |
| LAN |
1 RJ45 Dedicated IPMI LAN port |
| USB |
2 USB 3.0 ports (rear) |
| VGA |
1 VGA port |
| Serial Port / Header |
1 Fast UART 16550 port / 1 Header (internal) |
| Others |
2 SuperDOM support on the motherboard |
| Others |
1 NVMe or 2 SATA M.2 (22x80/60/42 mm) support with option part: AOC-SMG3-2H8M2 |
| Others |
M.2 and SuperDOM are for OS boot and they cannot coexist |
| BIOS |
| BIOS Type |
AMI 32MB SPI Flash ROM |
| マネージメント |
| Software |
Intel® Node Manager |
| Software |
IPMI 2.0 |
| Software |
KVM with dedicated LAN |
| Software |
NMI |
| Software |
SSM, SPM, SUM |
| Software |
SuperDoctor® 5 |
| Software |
Watchdog |
| Power Configurations |
ACPI Power Management |
| システム監視機能 |
| CPU |
Monitors for CPU Cores, Chipset Voltages, Memory. |
| CPU |
4+1 Phase-switching voltage regulator |
| FAN |
Fans with tachometer monitoring |
| FAN |
Status monitor for speed control |
| FAN |
Pulse Width Modulated (PWM) fan connectors |
| Temperature |
Monitoring for CPU and chassis environment |
| Temperature |
Thermal Control for fan connectors |
| シャーシ |
| Form Factor |
1U Rackmount |
| Model |
CSE-809H-R1K05P3 |
| 外形寸法・重量 |
| Width |
17.2" (437mm) |
| Height |
1.7" (43mm) |
| Depth |
28.25" (718mm) |
| Package |
29.6" (W) x 8" (H) x 38.4" (L) |
| Weight |
Gross Weight: 48.1 lbs (21.9 kg) |
| Weight |
Net Weight: 33.5 lbs (15.2 kg) |
| フロントパネル |
| Buttons |
Power On/Off button |
| Buttons |
UID button |
| LEDs |
Power status LED |
| LEDs |
HDD activity LED |
| LEDs |
Network activity LEDs |
| LEDs |
Universal Information (UID) LED |
| Expansion Slots (per Node) |
| PCI-Express |
2 PCI-E 3.0 x16 Low-profile slots |
| PCI-Express |
1 SIOM card supportNote: Barebones and Complete System must bundle with SIOM(With only one CPU installed, SXB2 M.2 and SXB4 riser card slots not function) |
| Drive Bays (per Node) |
| Hot-swap |
4 Hot-swap 2.5" SAS3/SATA3 drive bays |
| 冷却機構 |
| Fans |
3 Heavy duty counter rotating fans with air shroud and optimal fan speed control |
| PowerStick Power Supply |
| Total Output Power |
800W: 100 – 127Vac |
| Total Output Power |
1000W: 200 – 240Vac |
| Dimension(W x H x L) |
38 x 40 x 360 mm |
| Input |
100-127Vac / 9-7.5A / 50-60Hz |
| Input |
200-240Vac / 6-5A / 50-60Hz |
| +12V |
Max: 66.7A / Min: 0A (100-127Vac) |
| +12V |
Max: 83A / Min: 0A (200-240Vac) |
| +5Vsb |
Max: 4A / Min: 0A |
| Output Type |
Gold Finger Connector (16 Power Pin, 14 Signal Pin) |
| Certification |
Titanium Level [ Test Report ] |
| 動作環境 |
| RoHS |
RoHS Compliant |
| Environmental Spec. |
Operating Temperature: 10°C ~ 35°C (50°F ~ 95°F) |
| Environmental Spec. |
Non-operating Temperature: -40°C to 60°C (-40°F to 140°F) |
| Environmental Spec. |
Operating Relative Humidity: 8% to 90% (non-condensing) |
| Environmental Spec. |
Non-operating Relative Humidity: 5% to 95% (non-condensing) |
