5038MD-H8TRF
| 製品種別 | サーバ |
|---|---|
| CPUソケット数 | |
| CPU | |
| 筐体サイズ | 3U |
| 最大GPU数 | |
| 電源仕様 | リダンダント電源 |
| 用途/特長 | |
| 製品説明 |
Supermicroについて
製品仕様
| Product SKUs | SuperServer | SYS-5038MD-H8TRF (Black) |
|---|---|
| プロセッサ/キャッシュ | CPU | Intel® Xeon® processor D-1541 Socket FCBGA 1667 CPU TDP support 45W, 12MB, 8 Cores, 16 Threads, 2.1-2.7GHz |
| System Memory (per node) | Memory Capacity | 4x 288-pin DDR4 DIMM slots Supports up to 128 GB DDR4 ECC RDIMM Supports up to 64 GB DDR4 ECC UDIMM |
| Memory Type | 2133/1866/1600MHz ECC DDR4 RDIMM and ECC/Non-ECC UDIMM |
| DIMM Sizes | 32GB, 16GB, 8GB, 4GB |
| Memory Voltage | 1.2 V |
| Error Detection | Corrects single-bit errors Detects double-bit errors (using ECC memory) |
| Expansion Slots (per node) | PCI-Express | 1x PCI-E 3.0 x8 Low-profile slot 1x Micro-LP for Dual GbE (pre-installed); 10GbE or IB AOC optional 4x M.2 (2x PCI-E 3.0 x4 + 1x PCI-E 2.0 x4 + 1x PCI-E 2.0 x2) |
| Network Devices (per node) | Micro-LP NIC | Intel® i350 GbE controller Dual RJ-45 connectors Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output Intel® I/O Acceleration Technology (I/O AT) MicroLP Adapter Matrix (Networking options) |
| On-Board Devices (per node) | Chipset | System on Chip (SoC) |
| SATA | SATA3 (6Gbps) via SoC |
| IPMI | Support for Intelligent Platform Management Interface v.2.0 IPMI 2.0 with virtual media over LAN and KVM over LAN support ASPEED AST2400 BMC |
| Headers | 1x Type A USB 3.0 |
| Graphics | ASPEED AST2400 Graphics (BMC with Graphic controller) |
| Input / Output (per node) | SATA | 2x SATA3 (6Gbps) ports |
| LAN | 2x RJ45 Gigabit Ethernet LAN ports 1x RJ45 Dedicated IPMI LAN port |
| KVM | 1x VGA, 1x COM and 2x USB 2.0 (with KVM dongle) |
| BIOS | BIOS Type | 128Mb SPI Flash EEPROM with AMI BIOS |
| BIOS Features | DMI 2.3 ACPI 1.0 / 2.0 USB Keyboard support SMBIOS 2.3 |
| Rear Window (each node) | Switch | Power / UID |
| シャーシ | Form Factor | 3U |
| Model | CSE-938BH-R1K68B |
| 外形寸法・重量 | Height | 5.21" (132 mm) |
| Width | 17.26" (438 mm) |
| Depth | 23.2" (589 mm) |
| Package | 11.65" (H) x 26.26" (W) x 34" (D) |
| Weight | Net Weight: 62.2 lbs (28.21 kg) Gross Weight: 88 lbs (39.92 kg) |
| Color | Black |
| フロントパネル | Buttons | Power On/Off button |
| LEDs | Power LED Node status LED |
| Drive Bays (per node) | Internal | 2x 3.5" Hot-swap SATA3 (6Gbps) HDDs per node (or 2x 2.5" SATA3 with optional kits); up to 16 HDDs total Enterprise SATA HDD only recommended |
| 冷却機構 | Fans | 4x 8cm Heavy duty fans with optimal cooling zone |
| Power Supply (76mm Width) | Total Output Power | 800W: 100 – 140Vac 1600W: 180 – 240Vac |
| Dimension(W x H x L) | 76 x 40.4 x 336 mm |
| Input | 100-140Vac / 10-7A / 50-60Hz 180-240Vac / 11-8A / 50-60Hz |
| +12V | Max: 67A / Min: 0A (100-140Vac) Max: 133A / Min: 0A (180-240Vac) |
| +5Vsb | Max: 1A / Min: 0A |
| Output Type | 27 Pairs Gold Finger Connector |
| Certification | Titanium Level [ Test Report ] |
| システム監視機能 | CPU | Monitors for CPU Cores, +3.3V, +5V, +12V, +3.3V Standby, +5V Standby, VBAT, Memory, Chipset Voltages. 3-Phase-switching voltage regulator with auto-sense from 0.5V-2.3V |
| FAN | Cooling zone |
| Temperature | Monitoring for CPU and chassis environment |
| 動作環境/コンプライアンス | RoHS | RoHS Compliant |
| Environmental Spec. | Operating Temperature: 10°C to 35°C (50°F to 95°F) Non-operating Temperature: -40°C to 70°C (-40°F to 158°F) Operating Relative Humidity: 8% to 90% (non-condensing) Non-operating Relative Humidity: 5% to 95% (non-condensing) |
パーツ仕様
| パーツリスト | |||
|---|---|---|---|
| 型番 | 数量 | 内容 | |
| Motherboard / Chassis | MBD-X10SDD-F | 8 | Super X10SDD-F Motherboard |
| Motherboard / Chassis | CSE-938BH-R1K68B | 1 | 3U Chassis |
| Add-on Card / Module | AOC-CGP-I2-P | 8 | AOC-CGP-I2-O-P |
| Air Shroud | MCP-310-93804-0B | 8 | 938 mylar airshroud for X10SLD-F (X9 compatible),RoHS/REACH,PBF |
| Backplane | BPN-SAS-938H | 1 | 16-port 3U (CSE-938) MicroCloud 6Gbps backplane, support up to 16x 3.5-inch SAS/SATA HDD |
| Cable 1 | CBL-0218L | 1 | USB/KVM/SUVI,36 PIN TO 9 PIN/15 PIN/2 USB CH,11.5CM,30/28AWG |
| Label | LBL-0108 | 1 | CAUTION LABEL FOR REDUNDANT PWR SYSTEMS |
| Riser Card | RSC-RR1U-E8 | 8 | RSC-RR1U-E8 |
| Power Supply | PWS-1K68A-1R | 2 | 1U 1600W Redundant Titanium Power Supply 76mm width 27Pair,PBF |
| オプションパーツリスト | |||
| 型番 | 数量 | 内容 | |
| Cable | CBL-0118L-03 CBL-0476L | For AOC-S2308L-L8i For AOC-SAS2LP-H8iR | |
| Storage Control Card and Cable(s) | AOC-S2308L-L8i AOC-SAS2LP-H8iR | Std LP, 8 internal ports, 6Gb/s per port- Gen3, RAID 0/1/10 Std LP, 8 internal ports, 6Gb/s per port- Gen3, RAID 0/1/5/6/10/50/60 NOTE: SYS-5038MD-H8TRF is designed to support max 6GB/s | |
| Cable | CBL-SAST-0616 CBL-0118L-03 CBL-0476L | For AOC-S3008L-L8i/AOC-SAS3-9361-4I For AOC-S2308L-L8i For AOC-SAS2LP-H8iR | |
| Storage Controller Card(s) | AOC-S3008L-L8i AOC-SAS3-9361-4I AOC-S2308L-L8i AOC-SAS2LP-H8iR | Std LP, 8 ports, 12Gb/s Gen3, RAID 0/1/10 Std LP, 4 ports, 12Gb/s Gen3, RAID 0/1/5/6/10/50/60 Std LP, 8 ports, 6Gb/s Gen3, RAID 0/1/10 Std LP, 8 ports, 6Gb/s Gen3, RAID 0/1/5/6/10/50/60 NOTE: SYS-5038MD-H8TRF is designed to support max 6GB/s Heatsink SNK-P0047PSM is required for AOC HBA card | |
| Drive Tray(s) | MCP-220-93801-0B | Black gen 6 hot-swap 3.5-to-2.5 HDD tray | |
| M.2 Secure Screw | FST-SCRW-0083L | One M.2 secure screw per M.2 SSD | |
| Global Services & Support | OS4HR3/2/1 | 3/2/1-year onsite 24x7x4 service | |
| Global Services & Support | OSNBD3/2/1 | 3/2/1-year onsite NBD service | |
| Software | SFT-OOB-LIC | 1 | OOB Management Package (per node license) |
| Software | SFT-DCMS-Single | 1 | DataCenter Management Package (per node license) |
| パーツリスト | |||
| 型番 | 数量 | 内容 | |
| Cable 2 | CBL-PWCD-0578 | 2 | PWCD,US,IEC60320 C14 TO C13,3FT,14AWG |
| オプションパーツリスト | |||
| 型番 | 数量 | 内容 | |
| Software | SFT-OOB-LIC • | 1 | OOB Management Package (per node license) |
| Drive Tray(s) | MCP-220-00158-0B | Black gen 6.5 hot-swap 3.5-to-2.5 Tool-less drive tray | |
