2028TP-DNCFR
| 製品種別 | サーバ |
|---|---|
| CPUソケット数 | |
| CPU | |
| 筐体サイズ | 2U |
| 最大GPU数 | |
| 電源仕様 | リダンダント電源 |
| 用途/特長 | |
| 製品説明 |
Supermicroについて
製品仕様
| Product SKUs | SYS-2028TP-DNCFR | SuperServer 2028TP-DNCFR (Black) |
|---|---|
| Processor/Cache (per Node) | CPU | Intel® Xeon® processor E5-2600 v4†/v3 family(up to 145W TDP)* Dual Socket R3 (LGA 2011) |
| Cores / Cache | Up to 22 Cores† / Up to 55MB† Cache |
| System Bus | QPI up to 9.6 GT/s |
| Note | † BIOS version 2.0 or above is required * Please contact Supermicro Technical Support for additional information about frequency optimized CPUs and specialized system optimization. |
| System Memory(per Node) | Memory Capacity | 16x 288-pin DDR4 DIMM slots Up to 2TB† ECC 3DS LRDIMM, 512GB ECC RDIMM |
| Memory Type | 2400†/2133/1866/1600MHz ECC DDR4 SDRAM 72-bit |
| DIMM Sizes | RDIMM:32GB, 16GB, 8GB, 4GB LRDIMM: 64GB, 32GB 3DS LRDIMM: 128GB |
| Memory Voltage | 1.2 V |
| Error Detection | Corrects single-bit errors |
| On-Board Devices (per Node) | Chipset | Intel® C612 chipset |
| Infiniband | Mellanox ConnectX-3 FDR Infiniband 56Gbps Controller |
| SAS | Broadcom 3008 SAS3 (12Gbps) controller; RAID 0, 1, 10 support Note: In order to support NVMe drives, both CPU socket must be populated |
| IPMI | Support for Intelligent Platform Management Interface v.2.0 IPMI 2.0 with virtual media over LAN and KVM-over-LAN support ASPEED AST2400 BMC |
| Network Controllers | Intel® i350 Dual Port Gigabit Ethernet Virtual Machine Device Queues reduce I/O overhead Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output 1 Realtek RTL8201N PHY (dedicated IPMI) |
| Graphics | ASPEED AST2400 BMC |
| Input / Output (per Node) | SAS | 8 SAS3 (12Gbps) ports |
| LAN | 2 RJ45 Gigabit Ethernet LAN ports 1 RJ45 Dedicated IPMI LAN port |
| Infiniband | 1 external QSFP Infiniband connector |
| USB | 2 USB 3.0 ports (rear) |
| VGA | 1 VGA port |
| Serial Port / Header | 1 Fast UART 16550 port / 1 Header (internal) |
| Others | 1 mSATA (full size) and one SATADOM support on the daughter card 1 SATADOM support on the motherboard |
| Product SKUs | SYS-2028TP-DNCFR | SuperServer 2028TP-DNCFR (Black) |
| Processor/Cache (per Node) | CPU | Intel® Xeon® processor E5-2600 v4†/v3 family(up to 145W TDP)* Dual Socket R3 (LGA 2011) |
| Cores / Cache | Up to 22 Cores† / Up to 55MB† Cache |
| System Bus | QPI up to 9.6 GT/s |
| Note | † BIOS version 2.0 or above is required * Please contact Supermicro Technical Support for additional information about frequency optimized CPUs and specialized system optimization. |
| System Memory(per Node) | Memory Capacity | 16x 288-pin DDR4 DIMM slots Up to 2TB† ECC 3DS LRDIMM, 512GB ECC RDIMM |
| Memory Type | 2400†/2133/1866/1600MHz ECC DDR4 SDRAM 72-bit |
| DIMM Sizes | RDIMM:32GB, 16GB, 8GB, 4GB LRDIMM: 64GB, 32GB 3DS LRDIMM: 128GB |
| Memory Voltage | 1.2 V |
| Error Detection | Corrects single-bit errors |
| On-Board Devices (per Node) | Chipset | Intel® C612 chipset |
| Infiniband | Mellanox ConnectX-3 FDR Infiniband 56Gbps Controller |
| SAS | Broadcom 3008 SAS3 (12Gbps) controller; RAID 0, 1, 10 support Note: In order to support NVMe drives, both CPU socket must be populated |
| IPMI | Support for Intelligent Platform Management Interface v.2.0 IPMI 2.0 with virtual media over LAN and KVM-over-LAN support ASPEED AST2400 BMC |
| Network Controllers | Intel® i350 Dual Port Gigabit Ethernet Virtual Machine Device Queues reduce I/O overhead Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output 1 Realtek RTL8201N PHY (dedicated IPMI) |
| Graphics | ASPEED AST2400 BMC |
| Input / Output (per Node) | SAS | 8 SAS3 (12Gbps) ports |
| LAN | 2 RJ45 Gigabit Ethernet LAN ports 1 RJ45 Dedicated IPMI LAN port |
| Infiniband | 1 external QSFP Infiniband connector |
| USB | 2 USB 3.0 ports (rear) |
| VGA | 1 VGA port |
| Serial Port / Header | 1 Fast UART 16550 port / 1 Header (internal) |
| Others | 1 mSATA (full size) and one SATADOM support on the daughter card 1 SATADOM support on the motherboard |
| シャーシ | Form Factor | 2U Rackmount |
| Model | CSE-217HD+-R1K68B |
| 外形寸法・重量 | Width | 17.25" (438mm) |
| Height | 3.47" (88mm) |
| Depth | 28.75" (730mm) |
| Weight | Gross Weight: 85 lbs (38.6kg) Net Weight: 66 lbs (29.9 kg) |
| Available Colors | Black |
| フロントパネル | Buttons | Power On/Off button UID button |
| LEDs | Power status LED HDD activity LED 2 Network activity LEDs Universal Information (UID) LED |
| Expansion Slots (per Node) | PCI-Express | 1 PCI-E 3.0 x16 slot 1 PCI-E 3.0 x8 slot |
| Drive Bays (per Node) | Hot-swap | 8 Hot-swap 2.5" SAS HDD Bays 4 Hot-swap 2.5"Bays support NVMeNote: NVMe support requires 2 CPUs installed |
| 冷却機構 | Fans | 4 heavy duty 8cm PWM fans with optimal fan speed control |
| Power Supply (76mm Width) | Total Output Power | 800W: 100 – 140Vac 1600W: 180 – 240Vac |
| Dimension(W x H x L) | 76 x 40.4 x 336 mm |
| Input | 100-140Vac / 10-7A / 50-60Hz 180-240Vac / 11-8A / 50-60Hz |
| +12V | Max: 67A / Min: 0A (100-140Vac) Max: 133A / Min: 0A (180-240Vac) |
| +5Vsb | Max: 1A / Min: 0A |
| Output Type | 27 Pairs Gold Finger Connector |
| Certification | Titanium Level [ Test Report ] |
| BIOS | BIOS Type | 128Mb SPI Flash EEPROM with AMI BIOS |
| BIOS Features | Plug and Play (PnP) APM 1.2 PCI 2.2 ACPI 1.0 / 2.0 USB Keyboard support SMBIOS 2.3 UEFI |
| 動作環境/コンプライアンス | RoHS | RoHS Compliant |
| Environmental Spec. | Operating Temperature: 10°C to 35°C (50°F to 95°F) Non-operating Temperature: -40°C to 70°C (-40°F to 158°F) Operating Relative Humidity: 8% to 90% (non-condensing) Non-operating Relative Humidity: 5% to 95% (non-condensing) |
パーツ仕様
| パーツリスト | |||
|---|---|---|---|
| 型番 | 数量 | 内容 | |
| Motherboard / Chassis | MBD-X10DRT-PIBF | 2 | Super X10DRT-PIBF Motherboards |
| Motherboard / Chassis | CSE-217HD+-R1K68B | 1 | 2U Chassis |
| Air Shroud | MCP-310-82718-0B | 2 | 2U Twin air shroud for X9DRT-HF+ |
| Backplane | BPN-ADP-8S3008N4-2UP | 2 | 2U adapter card for 2U TwinPro system; LSI3008 on board to provide 8x SAS3 ports, 4x NVMe ports, 1x mSATA port and 1x SATADOM port,HF,RoHS/REACH |
| Backplane | BPN-SAS3-217HD-N4 | 1 | 24-port 2U TwinPro SAS3 CSE-217HD (8 HDD + 4 NVMe per node) backplane, support up to 16x 2.5-inch SAS3/SATA3 HDD/SSD and 8x NVMe/SAS3/SATA3 storage devices |
| Label | LBL-0108 | 1 | CAUTION LABEL FOR REDUNDANT PWR SYSTEMS |
| Manual | MNL-1700-QRG | 1 | 2028TP-DNCR/DNCTR/DNCFR, QRG |
| Heatsink / Retention | SNK-P0048PS | 4 | 2U Passive CPU Heat Sink for X9, X10 Generation Systems Equipped w/ a Narrow ILM MB |
| Power Supply | PWS-1K68A-1R | 2 | 1U 1600W Redundant Titanium Power Supply 76mm width 27Pair,PBF |
| オプションパーツリスト | |||
| 型番 | 数量 | 内容 | |
| Onsite Service Program | OS4HR3/2/1 | 3/2/1-year onsite 24x7x4 service | |
| Onsite Service Program | OSNBD3/2/1 | 3/2/1-year onsite NBD service | |
| Software | SFT-OOB-LIC | 2 | OOB Management Package (per node license) |
| Software | SFT-DCMS-Single | 2 | DataCenter Management Package (per node license) |
| パーツリスト | |||
| 型番 | 数量 | 内容 | |
| Cable 1 | CBL-PWCD-0578 | 2 | PWCD,US,IEC60320 C14 TO C13,3FT,14AWG |
| オプションパーツリスト | |||
| 型番 | 数量 | 内容 | |
| Software | SFT-OOB-LIC • | 2 | OOB Management Package (per node license) |
