製品情報

6028TP-DNCTR

製品種別 サーバ
CPUソケット数
CPU  
 
 
筐体サイズ 2U
最大GPU数
電源仕様 リダンダント電源
用途/特長  
製品説明

Supermicroについて


製品仕様

Product SKUs
SYS-6028TP-DNCTR SuperServer 6028TP-DNCTR (Black)
Processor/Cache (per Node)
CPU Intel® Xeon® processor E5-2600 v4/v3 family(up to 145W TDP)*

Dual Socket R3 (LGA 2011)
Cores / Cache Up to 22 Cores / Up to 55MB Cache
System Bus QPI up to 9.6 GT/s
Note BIOS version 2.0 or above is required
* Please contact Supermicro Technical Support for additional information about frequency optimized CPUs and specialized system optimization.
System Memory(per Node)
Memory Capacity 16x 288-pin DDR4 DIMM slots
Up to 2TB ECC 3DS LRDIMM, 512GB ECC RDIMM
Memory Type 2400/2133/1866/1600MHz ECC DDR4 SDRAM 72-bit
DIMM Sizes RDIMM:64GB, 32GB, 16GB, 8GB, 4GB
LRDIMM: 64GB, 32GB
3DS LRDIMM: 128GB
Memory Voltage 1.2 V
Error Detection Corrects single-bit errors
On-Board Devices (per Node)
Chipset Intel® C612 chipset
SAS Broadcom 3008 SAS3 (12Gbps) controller;
   RAID 0, 1, 10 support
Note: In order to support NVMe drives, both CPU socket must be populated
IPMI Support for Intelligent Platform Management Interface v.2.0
IPMI 2.0 with virtual media over LAN and KVM-over-LAN support
ASPEED AST2400 BMC
Network Controllers Intel® X540 Dual port 10GBase-T
Virtual Machine Device Queues reduce I/O overhead
Supports 10GBASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output
1x Realtek RTL8201N PHY (dedicated IPMI)
Graphics ASPEED AST2400 BMC
Input / Output (per Node)
SAS 6x SAS3 (12Gbps) ports
LAN 2x RJ45 10GBase-T ports
1x RJ45 Dedicated IPMI LAN port
USB 2x USB 3.0 ports total (2x rear)
VGA 1x VGA port
Serial Port / Header 1x Fast UART 16550 port / 1 Header (internal)
Others 1x mSATA (full size) and one SATADOM support on the daughter card
1x SATADOM support on the motherboard
Product SKUs
SYS-6028TP-DNCTR SuperServer 6028TP-DNCTR (Black)
Processor/Cache (per Node)
CPU Intel® Xeon® processor E5-2600 v4/v3 family(up to 145W TDP)*

Dual Socket R3 (LGA 2011)
Cores / Cache Up to 22 Cores / Up to 55MB Cache
System Bus QPI up to 9.6 GT/s
Note BIOS version 2.0 or above is required
* Please contact Supermicro Technical Support for additional information about frequency optimized CPUs and specialized system optimization.
System Memory(per Node)
Memory Capacity 16x 288-pin DDR4 DIMM slots
Up to 2TB ECC 3DS LRDIMM, 512GB ECC RDIMM
Memory Type 2400/2133/1866/1600MHz ECC DDR4 SDRAM 72-bit
DIMM Sizes RDIMM:64GB, 32GB, 16GB, 8GB, 4GB
LRDIMM: 64GB, 32GB
3DS LRDIMM: 128GB
Memory Voltage 1.2 V
Error Detection Corrects single-bit errors
On-Board Devices (per Node)
Chipset Intel® C612 chipset
SAS Broadcom 3008 SAS3 (12Gbps) controller;
   RAID 0, 1, 10 support
Note: In order to support NVMe drives, both CPU socket must be populated
IPMI Support for Intelligent Platform Management Interface v.2.0
IPMI 2.0 with virtual media over LAN and KVM-over-LAN support
ASPEED AST2400 BMC
Network Controllers Intel® X540 Dual port 10GBase-T
Virtual Machine Device Queues reduce I/O overhead
Supports 10GBASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output
1x Realtek RTL8201N PHY (dedicated IPMI)
Graphics ASPEED AST2400 BMC
Input / Output (per Node)
SAS 6x SAS3 (12Gbps) ports
LAN 2x RJ45 10GBase-T ports
1x RJ45 Dedicated IPMI LAN port
USB 2x USB 3.0 ports total (2x rear)
VGA 1x VGA port
Serial Port / Header 1x Fast UART 16550 port / 1 Header (internal)
Others 1x mSATA (full size) and one SATADOM support on the daughter card
1x SATADOM support on the motherboard
シャーシ
Form Factor 2U Rackmount
Model CSE-827HD+-R1K68B
外形寸法・重量
Width 17.25" (438mm)
Height 3.47" (88mm)
Depth 30.5" (774mm)
Weight Gross Weight: 85 lbs (38.6kg)
Net Weight: 66 lbs (29.9 kg)
Available Colors Black
フロントパネル
Buttons Power On/Off button
UID button
LEDs Power status LED
HDD activity LED
2x Network activity LEDs
Universal Information (UID) LED
Expansion Slots (per Node)
PCI-Express 1x PCI-E 3.0 x16 slot
1x PCI-E 3.0 x8 slot
Drive Bays (per Node)
Hot-swap 6x 3.5" Hot-swap drive bays:
Up to 4x NVMe + 2x SAS3 or 6x SAS3
Note: NVMe support requires 2 CPUs installed
冷却機構
Fans 4x 8cm heavy duty PWM fans with optimal fan speed control
Power Supply (76mm Width)
Total Output Power 800W: 100 – 140Vac
1600W: 180 – 240Vac
Dimension
(W x H x L)
76 x 40.4 x 336 mm
Input 100-140Vac / 10-7A / 50-60Hz
180-240Vac / 11-8A / 50-60Hz
+12V Max: 67A / Min: 0A (100-140Vac)
Max: 133A / Min: 0A (180-240Vac)
+5Vsb Max: 1A / Min: 0A
Output Type 27 Pairs Gold Finger Connector
Certification   Titanium Level
  [ Test Report ]
BIOS
BIOS Type 128Mb SPI Flash EEPROM with AMI BIOS
BIOS Features Plug and Play (PnP)
APM 1.2
PCI 2.2
ACPI 1.0 / 2.0
USB Keyboard support
SMBIOS 2.3
UEFI
動作環境/コンプライアンス
RoHS
RoHS Compliant
Environmental Spec. Operating Temperature:
   10°C to 35°C (50°F to 95°F)
Non-operating Temperature:
   -40°C to 70°C (-40°F to 158°F)
Operating Relative Humidity:
   8% to 90% (non-condensing)
Non-operating Relative Humidity:
   5% to 95% (non-condensing)

パーツ仕様

パーツリスト
型番 数量 内容
Motherboard / Chassis MBD-X10DRT-PT 2 Super X10DRT-PT Motherboard
Motherboard / Chassis CSE-827HD+-R1K68B 1 2U Chassis
Air Shroud MCP-310-82718-0B 2 2U Twin air shroud for X9DRT-HF+
Backplane BPN-ADP-8S3008N4-2UP 2 2U adapter card for 2U TwinPro system; LSI3008 on board to provide 8x SAS3 ports, 4x NVMe ports, 1x mSATA port and 1x SATADOM port,HF,RoHS/REACH
Backplane BPN-SAS3-827HD-N4 1 Backplane for TwinPro with support up to 4x 3.5" SAS3/SATA3 HDD/SSD and 8x SAS3/SATA3/NVMe Storage Devicse. Each node supports up to 2xSAS3/SATA3 HDD/SSD and 4 SAS3/SATA3/NVMe devices,HF,RoHS/REACH
Label LBL-0108 1 CAUTION LABEL FOR REDUNDANT PWR SYSTEMS
Manual MNL-1699-QRG 1 6028TP-DNCR/DNCTR/DNCFR, QRG
Heatsink / Retention SNK-P0048PS 4 2U Passive CPU Heat Sink for X9, X10 Generation Systems Equipped w/ a Narrow ILM MB
オプションパーツリスト
型番 数量 内容
Onsite Service Program OS4HR3/2/1 3/2/1-year onsite 24x7x4 service
Onsite Service Program OSNBD3/2/1 3/2/1-year onsite NBD service
Software SFT-OOB-LIC 2 OOB Management Package (per node license)
Software SFT-DCMS-Single 2 DataCenter Management Package (per node license)
パーツリスト
型番 数量 内容
Backplane BPN-SAS3-827HD2-N4 1 12-port 2U TwinPro SAS3 CSE-827HD (2 HDD + 4 HDD/NVMe per node) backplane, support up to 4x 3.5-inch SAS3/SATA3 HDD/SSD and 8x NVMe/SAS3/SATA3 storage devices
Parts MCP-240-82713-0N 1 TwinPro SC827HD+ BPN retention bracket assembly
Power Supply PWS-1K68A-1R 2 1U 1600W Redundant Titanium Power Supply 76mm width 27Pair,PBF
オプションパーツリスト
型番 数量 内容
Hot-swap 3.5" to 2.5" Hard Disk Drive Tray MCP-220-00043-0N Black Hot-swap gen 4 3.5" to 2.5" HDD tray
パーツリスト
型番 数量 内容
Cable 1 CBL-PWCD-0578 2 PWCD,US,IEC60320 C14 TO C13,3FT,14AWG
オプションパーツリスト
型番 数量 内容
Software SFT-OOB-LIC • 2 OOB Management Package (per node license)