製品情報

6028TP-DNCR

製品種別 サーバ
CPUソケット数
CPU  
 
 
筐体サイズ 2U
最大GPU数
電源仕様 リダンダント電源
用途/特長  
製品説明

Supermicroについて


製品仕様

Product SKUs
SYS-6028TP-DNCR SuperServer 6028TP-DNCR (Black)
Processor/Cache (per Node)
CPU Intel® Xeon® processor E5-2600 v4/v3 family(up to 145W TDP)*

Dual Socket R3 (LGA 2011)
Cores / Cache Up to 22 Cores / Up to 55MB Cache
System Bus QPI up to 9.6 GT/s
Note BIOS version 2.0 or above is required
* Please contact Supermicro Technical Support for additional information about frequency optimized CPUs and specialized system optimization.
System Memory(per Node)
Memory Capacity 16x 288-pin DDR4 DIMM slots
Up to 2TB ECC 3DS LRDIMM, 512GB ECC RDIMM
Memory Type 2400/2133/1866/1600MHz ECC DDR4 SDRAM 72-bit
DIMM Sizes RDIMM:64GB, 32GB, 16GB, 8GB, 4GB
LRDIMM: 64GB, 32GB
3DS LRDIMM: 128GB
Memory Voltage 1.2 V
Error Detection Corrects single-bit errors
On-Board Devices (per Node)
Chipset Intel® C612 chipset
SAS Broadcom 3008 SAS3 (12Gbps) controller;
   RAID 0, 1, 10 support
Note: In order to support NVMe drives, both CPU socket must be populated
IPMI Support for Intelligent Platform Management Interface v.2.0
IPMI 2.0 with virtual media over LAN and KVM-over-LAN support
ASPEED AST2400 BMC
Network Controllers Intel® i350 Dual Port Gigabit Ethernet
Virtual Machine Device Queues reduce I/O overhead
Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output
1x Realtek RTL8201N PHY (dedicated IPMI)
Graphics ASPEED AST2400 BMC
Input / Output (per Node)
SAS 6x SAS3 (12Gbps) ports
LAN 2x RJ45 Gigabit Ethernet LAN ports
1x RJ45 Dedicated IPMI LAN port
USB 2x USB 3.0 ports total (2x rear)
VGA 1x VGA port
Serial Port / Header 1x Fast UART 16550 port / 1 Header (internal)
Others 1x mSATA (full size) and one SATADOM support on the daughter card
1x SATADOM support on the motherboard
Product SKUs
SYS-6028TP-DNCR SuperServer 6028TP-DNCR (Black)
Processor/Cache (per Node)
CPU Intel® Xeon® processor E5-2600 v4/v3 family(up to 145W TDP)*

Dual Socket R3 (LGA 2011)
Cores / Cache Up to 22 Cores / Up to 55MB Cache
System Bus QPI up to 9.6 GT/s
Note BIOS version 2.0 or above is required
* Please contact Supermicro Technical Support for additional information about frequency optimized CPUs and specialized system optimization.
System Memory(per Node)
Memory Capacity 16x 288-pin DDR4 DIMM slots
Up to 2TB ECC 3DS LRDIMM, 512GB ECC RDIMM
Memory Type 2400/2133/1866/1600MHz ECC DDR4 SDRAM 72-bit
DIMM Sizes RDIMM:64GB, 32GB, 16GB, 8GB, 4GB
LRDIMM: 64GB, 32GB
3DS LRDIMM: 128GB
Memory Voltage 1.2 V
Error Detection Corrects single-bit errors
On-Board Devices (per Node)
Chipset Intel® C612 chipset
SAS Broadcom 3008 SAS3 (12Gbps) controller;
   RAID 0, 1, 10 support
Note: In order to support NVMe drives, both CPU socket must be populated
IPMI Support for Intelligent Platform Management Interface v.2.0
IPMI 2.0 with virtual media over LAN and KVM-over-LAN support
ASPEED AST2400 BMC
Network Controllers Intel® i350 Dual Port Gigabit Ethernet
Virtual Machine Device Queues reduce I/O overhead
Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output
1x Realtek RTL8201N PHY (dedicated IPMI)
Graphics ASPEED AST2400 BMC
Input / Output (per Node)
SAS 6x SAS3 (12Gbps) ports
LAN 2x RJ45 Gigabit Ethernet LAN ports
1x RJ45 Dedicated IPMI LAN port
USB 2x USB 3.0 ports total (2x rear)
VGA 1x VGA port
Serial Port / Header 1x Fast UART 16550 port / 1 Header (internal)
Others 1x mSATA (full size) and one SATADOM support on the daughter card
1x SATADOM support on the motherboard
シャーシ
Form Factor 2U Rackmount
Model CSE-827HD+-R1K68B
外形寸法・重量
Width 17.25" (438mm)
Height 3.47" (88mm)
Depth 30.5" (774mm)
Weight Gross Weight: 85 lbs (38.6kg)
Net Weight: 66 lbs (29.9 kg)
Available Colors Black
フロントパネル
Buttons Power On/Off button
UID button
LEDs Power status LED
HDD activity LED
2x Network activity LEDs
Universal Information (UID) LED
Expansion Slots (per Node)
PCI-Express 1x PCI-E 3.0 x16 slot
1x PCI-E 3.0 x8 slot
Drive Bays (per Node)
Hot-swap 6x 3.5" Hot-swap drive bays:
Up to 4x NVMe + 2x SAS3 or 6x SAS3
Note: NVMe support requires 2 CPUs installed
冷却機構
Fans 4x 8cm heavy duty PWM fans with optimal fan speed control
Power Supply (76mm Width)
Total Output Power 800W: 100 – 140Vac
1600W: 180 – 240Vac
Dimension
(W x H x L)
76 x 40.4 x 336 mm
Input 100-140Vac / 10-7A / 50-60Hz
180-240Vac / 11-8A / 50-60Hz
+12V Max: 67A / Min: 0A (100-140Vac)
Max: 133A / Min: 0A (180-240Vac)
+5Vsb Max: 1A / Min: 0A
Output Type 27 Pairs Gold Finger Connector
Certification   Titanium Level
  [ Test Report ]
BIOS
BIOS Type 128Mb SPI Flash EEPROM with AMI BIOS
BIOS Features Plug and Play (PnP)
APM 1.2
PCI 2.2
ACPI 1.0 / 2.0
USB Keyboard support
SMBIOS 2.3
UEFI
動作環境/コンプライアンス
RoHS
RoHS Compliant
Environmental Spec. Operating Temperature:
   10°C to 35°C (50°F to 95°F)
Non-operating Temperature:
   -40°C to 70°C (-40°F to 158°F)
Operating Relative Humidity:
   8% to 90% (non-condensing)
Non-operating Relative Humidity:
   5% to 95% (non-condensing)

パーツ仕様

パーツリスト
型番 数量 内容
Motherboard / Chassis MBD-X10DRT-P 2 Super X10DRT-P Motherboard
Motherboard / Chassis CSE-827HD+-R1K68B 1 2U Chassis
Air Shroud MCP-310-82718-0B 2 2U Twin air shroud for X9DRT-HF+
Backplane BPN-ADP-8S3008N4-2UP 2 2U adapter card for 2U TwinPro system; LSI3008 on board to provide 8x SAS3 ports, 4x NVMe ports, 1x mSATA port and 1x SATADOM port,HF,RoHS/REACH
Backplane BPN-SAS3-827HD-N4 1 Backplane for TwinPro with support up to 4x 3.5" SAS3/SATA3 HDD/SSD and 8x SAS3/SATA3/NVMe Storage Devicse. Each node supports up to 2xSAS3/SATA3 HDD/SSD and 4 SAS3/SATA3/NVMe devices,HF,RoHS/REACH
Label LBL-0108 1 CAUTION LABEL FOR REDUNDANT PWR SYSTEMS
Manual MNL-1699-QRG 1 6028TP-DNCR/DNCTR/DNCFR, QRG
Heatsink / Retention SNK-P0048PS 4 2U Passive CPU Heat Sink for X9, X10 Generation Systems Equipped w/ a Narrow ILM MB
オプションパーツリスト
型番 数量 内容
Onsite Service Program OS4HR3/2/1 3/2/1-year onsite 24x7x4 service
Onsite Service Program OSNBD3/2/1 3/2/1-year onsite NBD service
Software SFT-OOB-LIC 2 OOB Management Package (per node license)
Software SFT-DCMS-Single 2 DataCenter Management Package (per node license)
パーツリスト
型番 数量 内容
Backplane BPN-SAS3-827HD2-N4 1 12-port 2U TwinPro SAS3 CSE-827HD (2 HDD + 4 HDD/NVMe per node) backplane, support up to 4x 3.5-inch SAS3/SATA3 HDD/SSD and 8x NVMe/SAS3/SATA3 storage devices
Parts MCP-240-82713-0N 1 TwinPro SC827HD+ BPN retention bracket assembly
Power Supply PWS-1K68A-1R 2 1U 1600W Redundant Titanium Power Supply 76mm width 27Pair,PBF
オプションパーツリスト
型番 数量 内容
Hot-swap 3.5" to 2.5" Hard Disk Drive Tray MCP-220-00043-0N Black Hot-swap gen 4 3.5" to 2.5" HDD tray
パーツリスト
型番 数量 内容
Cable 1 CBL-PWCD-0578 2 PWCD,US,IEC60320 C14 TO C13,3FT,14AWG
オプションパーツリスト
型番 数量 内容
Software SFT-OOB-LIC • 2 OOB Management Package (per node license)