生産終了
1027GR-TRT2
| 製品種別 | サーバ |
|---|---|
| CPUソケット数 | |
| CPU | |
| 筐体サイズ | 1U |
| 最大GPU数 | |
| 電源仕様 | シングル電源 |
| 用途/特長 | |
| 製品説明 |
Supermicroについて
製品仕様
| Product SKUs | SYS-1027GR-TRT2 | SuperServer 1027GR-TRT2 (Black) |
|---|---|
| マザーボード | Motherboard | Super X9DRG-HTF+II |
| プロセッサ/キャッシュ | CPU | Dual Socket R (LGA 2011) Intel® Xeon® processor E5-2600 and E5-2600 v2 family†(up to 130W TDP) |
| Note | † BIOS version 3.0 or above is required |
| Cache | Up to 30MB |
| System Bus | QPI up to 8 GT/s |
| GPU/Xeon Phi Support | M2090, up to 130W CPU at 30°C M2075, up to 130W CPU at 35°C K10/K20/K20X/K1/K2 (Kepler), up to 130W CPU at 30°C Xeon Phi, up to 130W CPU at 30°C |
| メモリ | Memory Capacity | 16x 240-pin DDR3 DIMM slots Up to 1TB DDR3 ECC LRDIMM Up to 512GB DDR3 ECC Registered memory (RDIMM) Up to 128GB DDR3 ECC and non-ECC UDIMM |
| Memory Type | 1866/1600/1333/1066MHz ECC DDR3 SDRAM 72-bit, 240-pin gold-plated DIMMs |
| DIMM Sizes | 32GB, 16GB, 8GB, 4GB, 2GB, 1GB |
| Memory Voltage | 1.5 V, 1.35 V |
| Error Detection | Corrects single-bit errors Detects double-bit errors (using ECC memory) |
| オンボードデバイス | Chipset | Intel® C602 Chipset |
| SATA | SATA 2.0 3Gbps with RAID 0, 1, 5, 10 SATA 3.0 6Gbps with RAID 0, 1 |
| IPMI | Support for Intelligent Platform Management Interface v.2.0 IPMI 2.0 with virtual media over LAN and KVM-over-LAN support Nuvoton WPCM450 BMC |
| Network Controllers | Intel® X540 Dual Port 10GBase-T Virtual Machine Device Queues reduce I/O overhead Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output |
| Graphics | Nuvoton WPCM450 BMC |
| 標準インターフェース | SATA | 2x SATA3 (6Gbps) ports 2x SATA2 (3Gbps) ports |
| LAN | 2x RJ45 10GbE ports 1x RJ45 Dedicated IPMI LAN port |
| USB | 2x USB 2.0 ports |
| Video | 1x VGA Connector |
| Serial Port | 1x Serial header |
| BIOS | BIOS Type | 16Mb SPI Flash EEPROM with AMI® BIOS |
| BIOS Features | Plug and Play (PnP) APM 1.2 DMI 2.3 PCI 2.3 ACPI 1.0 / 2.0 / 3.0 USB Keyboard support SMBIOS 2.7.1 UEFI |
| シャーシ | Form Factor | 1U Rackmount |
| Model | CSE-118GH-R1K66B |
| 外形寸法/重量 | Height | 1.7" (43mm) |
| Width | 17.2" (437mm) |
| Depth | 30.6" (777mm) |
| Gross Weight | 48 lbs (21.8 kg) |
| Available Color | Black |
| フロントパネル | Buttons | Power On/Off button System Reset button |
| LEDs | Power LED Hard drive activity LED 2x Network activity LEDs System Overheat LED / Fan fail LED / UID LED |
| 拡張スロット | PCI-Express | 3x PCI-E 3.0 x16 slots(3x GPU/Xeon Phi cards optional) 1x PCI-E 3.0 x8 (in x16) low-profile slot |
| ドライブベイ | Hot-swap | 4x 2.5" Hot-swap drive bays |
| 冷却機構 | Fans | 10x counter-rotating fans with optimal fan speed control |
| 電源 | Power Supply | 1600W 1U Redundant Power Supplies with PMBus |
| Total Output Power | 1000W: 100 - 127Vac 1600W: 200 - 240Vac |
| Dimension(W x H x L) | 73.5 x 40 x 265 mm |
| Input | 100-127Vac / 12.9A Max / 50-60Hz 200-240Vac / 9.5A Max / 50-60Hz |
| +12V | Max: 82A / Min: 0.1A (100-127Vac) Max: 132A / Min: 0.1A (200-240Vac) |
| 12V SB | Max: 2A / Min: 0.2A |
| Output Type | 25 Pairs Gold Finger Connector |
| Certification | Platinum Level [ Test Report ] |
| システム監視機能 | CPU | Monitors for CPU Cores,+1.5V, +3.3V, +5V, +12V, +5 Stdby, +3.3 Stdby, VBAT, Memory Voltages. CPU Core 6-Phase-switching voltage regulator |
| FAN | Total of ten 4-pin PWM fans 10x fans with tachometer monitoring Status monitor for speed control Status monitor for on/off control Low noise fan speed control |
| Temperature | Monitoring for CPU and chassis environment CPU thermal trip support Thermal Control for 10x Fan Connectors PSU I2C temperature sensing logic Thermal Monitor 2 (TM2) support PECI |
| LED | Power Fail / Overheat LED Suspend-state Indicator LED UID LED |
| Other Features | SDDC Support |
| 動作環境/コンプライアンス | RoHS | RoHS Compliant |
| Environmental Spec. | Operating Temperature: 10°C to 35°C (50°F to 95°F) Non-operating Temperature: -40°C to 70°C (-40°F to 158°F) Operating Relative Humidity: 8% to 90% (non-condensing) Non-operating Relative Humidity: 5% to 95% (non-condensing) |
パーツ仕様
| パーツリスト | |||
|---|---|---|---|
| 型番 | 数量 | 内容 | |
| Motherboard / Chassis | MBD-X9DRG-HTF+II | 1 | Super X9DRG-HTF+II Motherboard |
| Motherboard / Chassis | CSE-118GH-R1K66B | 1 | 1U Black SC118GQ Chassis |
| Air Shroud | MCP-310-11802-0N | 1 | Air Shroud for X9DRG-HF used in SC118GQ-R1800B |
| Backplane | BPN-SAS-118G-4 | 1 | 4-port 1U direct-attached backplane, support up to 4x 2.5-inch SAS/SATA HDD/SSD |
| Cable 1 | CBL-0157L-02 | 1 | CBL,SGPIO,2X4F TO 2X4F,P2.54,RIBBON IN RND TUBE,27CM,28AWG |
| Cable 2 | CBL-0460L | 1 | 8 Pin to Two 4 Pin Backplane Power Ext. 28/22cm. 18AWG |
| Cable 3 | CBL-PWEX-0582 | 3 | 8 pin to two 6+2 pin 12V GPU power cable, 30 cm 16/20 AWG, 10A/pin(16AWG), 6A/pin(20AWG), -25~85C, RoHS/REACH |
| Cable 4 | CBL-0484L | 4 | SATA,INT,ROUND,ST-ST,55CM,30AWG |
| Cable 5 | CBL-0296L | 5 | 4 pin to 4 pin fan extension cord, for PWM fan. 23cm. 24AWG |
| Riser Card | RSC-R1UG-AE16B+II | 1 | RSC-R1UG-AE16B+II |
| Riser Card | RSC-R1UG-E16A+II | 1 | RSC-R1UG-E16A+II |
| Riser Card | RSC-R1UG-E16AR+II | 1 | RSC-R1UG-E16AR+II |
| Riser Card | RSC-R1UG-E16R+II | 1 | RSC-R1UG-E16R+II |
| Heatsink / Retention | SNK-P0047PS | 1 | 1U Passive CPU Heat Sink for X9, X10 Systems Equipped w/ a Narrow ILM MB |
| Heatsink / Retention | SNK-P0047PSC | 1 | 1U Passive Front CPU Heat Sink w/ a Side Air Channel for X9, X10 Systems Equipped with a Narrow ILM MB |
