生産終了
C2SBA+
製品種別 | マザーボード |
---|---|
CPUソケット数 | |
CPU | |
CPUソケット | LGA775 |
マザーボードサイズ | ATX |
製品説明 |
製品仕様
Product SKUs - Discontinued SKU (EOL). Please contact sales-rep for alternative options. | MBD-C2SBA+-O | C2SBA+(Standard Retail Pack) |
---|---|
MBD-C2SBA+-B | C2SBA+(Bulk Pack) |
フォームファクター/外形寸法 | Form Factor | ATX |
Dimensions | 12.0" x 9.6 ", (30.5cm x 24.4cm) |
プロセッサ/キャッシュ | CPU | Single LGA775 ZIF Socket Supports Intel® Core™2 Quad Q9000/Q8000/Q6000 series Supports Intel® Core™2 Duo E8000/E7000/E6000/E4000 series Supports Intel® Pentium® E5000/E2000 series Supports Intel® Celeron® E1000 and 400 series |
System Bus | 1333 / 1066 / 800 MHz system bus |
メモリ | Memory Capacity | Four 240-pin DIMM slots Supports up to 8 GB of unbuffered, non-ECC DDR2 800/667MHz memory (Dual Channel) |
Memory Type | DDR2 800/667MHz unbuffered, non-ECC SDRAM, 240-pin gold-plated DIMMs |
DIMM Sizes | 256 MB, 512 MB, 1 GB, 2 GB |
Memory Voltage | 1.8V only |
オンボードデバイス | Chipset | Intel G33 ICH9 |
Serial ATA | Intel® ICH9 SATA2 (3 Gbps) controller built-in |
Network Controllers | 1 x Intel® 82566 Gigabit Ethernet Supports 10 BASE-T, 100 BASE-TX, and 1000 BASE-T with RJ45 output |
Audio | High Definition 7.1 Channel Audio |
Video | On board graphics |
Super I/O | Winbond 83627DHG chip |
Clock Generator | CK505 |
標準インターフェース | Serial ATA | Four Serial ATA ports (3Gb/s) Four SATA hard drives supported |
IDE | Two EIDE channel supports up to four UDMA IDE devices ITE 8212F chipset - Rev 1.2 or earlier ITE 8211F chipset - Rev 1.2A or later |
Floppy | 1 Floppy controller; 1.44 MB |
LAN | 1x RJ45 LAN port |
USB | 12x USB 2.0 / 1.1 compatible 6 rear + 2 Type A connectors + 2 headers (4 ports) |
Audio | High Definition 7.1 Channel Audio Line-in / Line-out / Microphone Ports |
VGA | On board VGA port |
Keyboard / Mouse | PS/2 keyboard and mouse ports |
Serial Ports | 1x Fast UART 16550 serial port 1x Serial Header |
Parallel Port | 1x ECP / EEP Parallel Port |
Chassis ( Optimized for C2SBA+) | Mid-Tower | CSE-733E-465B CSE-733i-450 CSE-733i-465B CSE-733i-645 CSE-733T-450 CSE-733T-465B CSE-733T-645 CSE-733TQ-465B |
Tower / 4U Rackmount | CSE-742i-450 |
Important Note | To ensure system stability, a 420W (minimum) ATX power supply [4-pin +12V AND (20 or 24-pin)] is required. |
拡張スロット | PCI-Express | 1 (x16) PCI-e slot 1 (x4) PCI-e slot (using x8 slot) 1 (x1) PCI-e slot |
PCI | 3x 32-bit 33MHz PCI (5V) slots |
BIOS | BIOS Type | 16Mb SPI Flash EEPROM with AMI BIOS |
BIOS Features | Plug and Play (PnP) DMI 2.3 PCI 2.2 ACPI 1.0 / 2.0 USB Keyboard support SMBIOS 2.3 |
マネージメント | Software | SuperDoctor® III Watch Dog NMI Hardware monitor in W83627DHF (PECI support) |
Power Configurations | ACPI Power Management Main Switch Override Mechanism Wake-On-Ring (WOR) header Wake-On-LAN (WOL) header Keyboard Wakeup from Soft-Off Power-on mode control for AC power recovery Internal / External modem remote ring-on Suspend to RAM (STR) |
システム監視機能 | Voltage | Monitors for CPU Cores, +1.8V, +3.3V, +5V, ±12V, +3.3V/+5V Standby, VBAT CPU Core 3-Phase-switching voltage regulator with auto-sense from 0.8375V-1.6000V Adjustable CPU clock frequency ratio (Only available if CPU is supported) |
FAN | Total of five 4-pin fan headers 3 x fans with tachometer monitoring Status monitor for speed control Status monitor for on / off control Support 3-pin PWM fans (without speed control) Low noise fan speed control Pulse Width Modulated (PWM) fan conn. |
Temperature | Monitoring for CPU and chassis environment CPU thermal trip support Thermal Monitor 2 (TM2) Support PECI |
LED | CPU / System Overheat LED Standby power alert LED |
Other Features | Chassis intrusion Detection Chassis intrusion Header |
動作環境 | Environmental Spec. | Operating Temperature: 10°to 35°C (50°to 95°F) Non-operating Temperature: -40°to 70°C (-40°to 158°F) Operating Relative Humidity: 8% to 90% (non-condensing) Non-operating Relative Humidity: 5 to 95% (non-condensing) |
Regulatory | FCC | Class B |
パーツ仕様
Standard Retail Package | |||
---|---|---|---|
型番 | 数量 | 内容 | |
C2SBA+ | MBD-C2SBA+ -O | 1 | C2SBA+ Motherboard |
I/O Cable 1 | CBL-0044L | 4 | 57.5CM SATA FLAT S-S PBF |
I/O Cable 2 | CBL-022L | 1 | ATX FLOPPY CABLE 3 HEADERS PB FREE |
I/O Cable 3 | CBL-036L-03 | 2 | 18" ATA 133/100/66 3-DROP TPE CABLE, PBF |
I/O Shield | MCP-260-00001-00 | 1 | STANDARD I/O SHIELD W/ 2 SET AUDIO PORTS |
Manual | MNL-0941 | 1 | C2SBA+/C2SBA/C2SBE/C2SBA+II MANUAL |
Quick Reference Guide | MNL-0941-QRG | 1 | Quick Reference Guide |