生産終了
C2SBX+

製品種別 | マザーボード |
---|---|
CPUソケット数 | |
CPU | |
CPUソケット | LGA775 |
マザーボードサイズ | ATX |
製品説明 |
製品仕様
Product SKUs - Discontinued SKU (EOL). Please contact sales-rep for alternative options. | MBD-C2SBX+-O | C2SBX+(Standard Retail Pack) |
---|---|
MBD-C2SBX+-B | C2SBX+(Bulk Pack) |
フォームファクター/外形寸法 | Form Factor | ATX |
Dimensions | 12" x 9.6 ", (30.5cm x 24.4cm) |
プロセッサ/キャッシュ | CPU | Single LGA775 Socket Supports Intel® Core™2 Extreme QX9000/QX6000 series Supports Intel® Core™2 Quad Q9000/Q8000/Q6000 series Supports Intel® Core™2 Duo E8000/E7000/E6000/E4000 series Supports Intel® Pentium® E5000/E2000 series Supports Intel® Celeron® E1000 and 400 series |
System Bus | 1600 / 1333 / 1066 / 800 MHz system bus |
メモリ | Memory Capacity | Four 240-pin DIMM sockets Supports up to 8 GB of unbuffered, non-ECC DDR3 1333/1066/800MHz memory (Dual Channel) or up to 4 GB Non-ECC 1600MHz XMP DDR3 memory |
Memory Type | DDR3 1333/1066/800MHz unbuffered, non-ECC SDRAM, 240-pin gold-plated DIMMs or Non-ECC 1600MHz XMP DDR3 memory |
DIMM Sizes | 256 MB, 512 MB, 1 GB, 2 GB |
Memory Voltage | Dynamic (1.5V to 1.9V) |
オンボードデバイス | Chipset | Intel® X48 ICH9R + PXH/V |
Serial ATA | Intel® ICH9R SATA2 (3 Gbps) controller built-in RAID 0, 1, 5, 10 support (Windows Only) RAID 0, 1, 10 support (Linux) |
Network Controllers | 1x Intel® 82566DM Gigabit PCI-Express Ethernet Supports 10 BASE-T, 100 BASE-TX, and 1000 BASE-T with RJ45 output |
Audio | High Definition 7.1 Channel Audio |
Super I/O | Winbond 83627DHG chip |
Clock Generator | IDTCV183-1 |
標準インターフェース | Serial ATA | Six Serial ATA ports (3 Gbps performance) Six SATA hard drives supported |
Floppy | 1 Floppy controller; 1.44 MB |
LAN | 1x RJ45 LAN port |
USB | 12x USB 2.0 / 1.1 compatible 6 rear + 2 Type A connectors + 2 headers ( 4 front ports ) |
Audio | High Definition 7.1 Channel Audio Line-in / Line-out / Microphone Ports |
Keyboard / Mouse | PS/2 keyboard and mouse ports |
Serial Ports | 2x Fast UART 16550 serial port |
Parallel Port | 1x ECP / EEP Parallel Port |
Firewire | 2x IEEE 1394a headers |
Chassis ( Optimized for C2SBX+ ) | Important Note | To ensure system stability, a 420W (minimum) ATX power supply [4-pin +12V AND (24-pin) AND 8-pin +12V] is required. |
拡張スロット | PCI-Express | 2 (x16) PCI-E 2.0 slot 1 (x1) PCI-E slot |
PCI-X | 2x 64-bit 133 / 100MHz PCI-X (3.3V) slots |
PCI | 2x 32-bit 33MHz PCI (5V) slots |
BIOS | BIOS Type | 16Mb SPI Flash EEPROM with AMI BIOS |
BIOS Features | Plug and Play (PnP) DMI 2.3 PCI 2.2 ACPI 1.0 / 2.0 USB Keyboard support SMBIOS 2.3 |
マネージメント | Software | SuperDoctor® III Watch Dog NMI |
Power Configurations | ACPI/APM Power Management Main Switch Override Mechanism Wake-On-Ring (WOR) header Wake-On-LAN (WOL) header Keyboard Wakeup from Soft-Off Power-on mode control for AC power recovery Internal / External modem remote ring-on Suspend to RAM (STR) |
システム監視機能 | Voltage | Monitors for CPU Cores, +1.8V, +3.3V, +5V, ±12V, +3.3V/+5V Standby, VBAT, HT, Memory, Chipset CPU Core 4-Phase-switching voltage regulator with auto-sense from 0.8375V-1.6000V Adjustable CPU clock frequency ratio (Only available if CPU is supported) |
FAN | Total of five 4-pin fan headers 5 x fans with tachometer monitoring Status monitor for speed control Status monitor for on / off control Support 3-pin PWM fans (without speed control) Low noise fan speed control Pulse Width Modulated (PWM) fan conn. |
Temperature | Monitoring for CPU and chassis environment CPU thermal trip support Thermal Monitor 2 (TM2) Support PECI |
LED | CPU / System Overheat LED Suspend-state indicator LED +5V standby alert LED |
Other Features | Chassis intrusion Detection Chassis intrusion Header |
動作環境 | Environmental Spec. | Operating Temperature: 10°to 35°C (50°to 95°F) Non-operating Temperature: -40°to 70°C (-40°to 158°F) Operating Relative Humidity: 8% to 90% (non-condensing) Non-operating Relative Humidity: 5 to 95% (non-condensing) |
パーツ仕様
Standard Retail Package | |||
---|---|---|---|
型番 | 数量 | 内容 | |
C2SBX+ | MBD-C2SBX+-O | 1 | C2SBX+Motherboard |
Manual(s) | MNL-0943 (Rev 1.0a or newer) | 1 | Motherboard Manual for C2SBX+ |
I/O Cables | CBL-0022L | 1 | ATX Floppy Cable |
I/O Cables | CBL-0036L-03 | 1 | ATA 66/100 IDE LP Cable |
I/O Cables | CBL-0044L | 6 | SATA Cable (2Ft.) |
I/O Cables | CBL-0173L | 1 | Internal to External 1394 Connector |
I/O Shield | MCP-260-00001-00 | 1 | I/O Shield for C2SBX+ |