生産終了
X7DBR-i+
| 製品種別 | マザーボード |
|---|---|
| CPUソケット数 | |
| CPU | |
| CPUソケット | LGA771 |
| マザーボードサイズ | Enhanced Extended ATX |
| 製品説明 |
Supermicroについて
製品仕様
| Product SKUs - Discontinued SKU (EOL). Please contact sales-rep for alternative options. | MBD-X7DBR-i+-B | X7DBR-i+ (Bulk Pack) |
|---|---|
| フォームファクター/外形寸法 | Form Factor | Enhanced Extended ATX |
| Dimensions | 13.68" x 13" (34.7cm x 33cm) |
| プロセッサ/キャッシュ | CPU | Dual 771-pin LGA Sockets Supports up to two Intel® 64-bit Xeon® processor(s) of the same type below:
|
| System Bus | 1333 / 1066 / 667 MHz system bus |
| Operating System Software | Supports 64-bit Operating Systems Supports 32-bit Operating Systems |
| メモリ | Memory Capacity | Sixteen 240-pin DIMM sockets Supports up to 64 GB 667 / 533MHz DDR2 ECC FB-DIMM memory Dual branch memory bus Memory must be populated in pairs Memory Mirroring supported |
| Memory Type | 667 / 533MHz FB-DIMM (Fully Buffered DIMM) ECC DDR2 SDRAM 72-bit, 240-pin gold-plated DIMMs |
| DIMM Sizes | 512 MB, 1GB, 2GB, 4GB |
| Memory Voltage | 1.8V only 1.5V(AMB) |
| Error Detection | Corrects single-bit errors Detects double-bit errors (using ECC memory) Supports Intel® x4 and x8 Single Device Data Correction (SDDC) |
| オンボードデバイス | Chipset | Intel® 5000P (Blackford) chipset MCH + PXH-V + ESB2 |
| SATA | Intel ESB2 SATA 3.0Gbps Controller RAID 0, 1, 5, 10 support (Windows Only) RAID 0, 1, 10 support (Linux) |
| IPMI | Support for Intelligent Platform Management Interface v.2.0 200-pin IPMI SO-DIMM socket (SIMSO) (Optional: AOC-SIMSO(+)) |
| Network Controllers | Intel® (ESB2/Gilgal) 82563EB Dual-Port Gigabit Ethernet Controller Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output Intel® I/OAT support for fast, scaleable, and reliable networking |
| Graphics | ATI ES1000 controller with 16 MB of video memory |
| Super I/O | Winbond 83627HG chip |
| 標準インターフェース | Serial ATA | Six Serial ATA ports Six SATA hard drives supported |
| IDE | Single EIDE channel supports up to two UDMA IDE devices (IDE-M, IDE-S) including CF(Compact Flash) Card Compact Flash (40-pin connector, IDE 1, single channel) slot Supports UDMA Mode 5, PIO Mode 4, and ATA/100 |
| Floppy | 1 Floppy controller; 1.44 MB, 2.88 MB |
| LAN | 2x RJ45 LAN ports |
| USB | 2x USB rear ports 2x USB internal headers Total 6 USB 2.0 Compliant / 1.1 Compliant |
| VGA | 1x VGA Port |
| Keyboard / Mouse | PS/2 keyboard and mouse ports |
| Serial Port / Header | 1 Fast UART 16550 serial port 1 Fast UART 16550 serial header |
| Parallel Port | 1 ECP / EEP parallel port |
| Chassis ( Optimized for X7DBR-i+ ) | 1U Chassis | CSE-815TQ-700V CSE-815TQ-560V |
| Important Chassis Notes | To ensure system stability, a 560W (minimum) ATX power supply[4-pin (+12V), 8-pin (+12V) and 24-pin are required] |
| Expansion Slots (For 1U Systems) | Left Universal Slot | 1 64-bit 133MHz PCI-X OR 1 (x8) PCI-e Slot 1 64-bit 133MHz PCI-X OR 2 (x8) PCI-e Slots OR 3 64-bit 133MHz PCI-X |
| Right Slot | 1 (x8) PCI-e Slot (for 2U) |
| BIOS | BIOS Type | 8Mb Flash EEPROM with Phoenix® BIOS |
| BIOS Features | Plug and Play (PnP) SMBIOS 2.3 DMI 2.1 PCI 2.2 PCI-X 1.0 ACPI 1.0 USB Keyboard support Hardware BIOS Virus protection |
| マネージメント | Software | Optional IPMI (Intelligent Platform Management Interface) 2.0 SuperDoctor® III Watch Dog NMI |
| Power Configurations | ACPI Power Management Main Switch Override Mechanism Wake-On-Ring (WOR) header Wake-On-LAN (WOL) header Power-on mode for AC power recovery Internal / External modem remote ring-on |
| システム監視機能 | Voltage | Monitors for CPU Cores, +3.3V, +5V, ±12V, +1.2V, +1.5V, 5V Standby, VBAT 5-Phase-switching voltage regulator with auto-sense from 0.8375V-1.60V |
| FAN | Total of five 3-pin fan headers supporting up to 5 fans 5x fans with tachometer status monitoring Status monitor for speed control Low noise fan speed control |
| Temperature | Monitoring for CPU and chassis environment CPU thermal trip support Thermal Control for 5x fan connectors PSU I2C temperature sensing logic Thermal Monitor 2 (TM2) support |
| LED | CPU / System Overheat LED |
| Other Features | Chassis intrusion detection Chassis intrusion header SDDC Support |
| 動作環境 | Environmental Spec. | Operating Temperature: 10°to 35°C (50°to 95°F) Non-operating Temperature: -40°to 70°C (-40°to 158°F) Operating Relative Humidity: 8% to 90% (non-condensing) Non-operating Relative Humidity: 5 to 95% (non-condensing) |
| Regulatory | FCC | Passed to meet FCC standard requirement |
パーツ仕様
| Parts List | |||
|---|---|---|---|
| 型番 | 数量 | 内容 | |
| X7DBR-i+ | MBD-X7DBR-i+-B | 1 | X7DBR-i+ Motherboard |
| Manual(s) | MNL-0863 | 1 | Motherboard Manual for X7DBR-i+ |
| I/O Cables | CBL-0022L | 1 | ATX Floppy Cable |
| I/O Cables | CBL-0036L-03 | 1 | ATA 66/100 IDE LP Cable |
| Driver Disk | CDR-X7 1.01 | 1 | Version 1.01 CD or later |
