生産終了
X7DCL-3
| 製品種別 | マザーボード |
|---|---|
| CPUソケット数 | |
| CPU | |
| CPUソケット | LGA771 |
| マザーボードサイズ | ATX |
| 製品説明 |
Supermicroについて
製品仕様
| Product SKUs - Discontinued SKU (EOL). Please contact sales-rep for alternative options. | MBD-X7DCL-3-O | X7DCL-3(Standard Retail Pack) |
|---|---|
| MBD-X7DCL-3-B | X7DCL-3(Bulk Pack) |
| フォームファクター/外形寸法 | Form Factor | ATX |
| Dimensions | 12.05" x 10" (30.6cm x 25.4cm) |
| プロセッサ/キャッシュ | CPU | Dual 771-pin LGA Sockets Supports up to Dual Intel® 64-bit Xeon®processor(s) of the same type below:
|
| System Bus | 1333 / 1066 MHz system bus |
| Operating System Software | Supports 64-bit Operating Systems Supports 32-bit Operating Systems |
| メモリ | Memory Capacity | Six 240-pin DIMM sockets Supports up to 48GB 667/ 533MHz DDR2 ECC Register Single/Dual Rank memory * Dual channel memory bus Memory must be populated in pairs |
| Memory Type | 667/533MHz Register DDR2 ECC Single/Dual Rank SDRAM 72-bit, 240-pin gold-plated DIMMs * |
| DIMM Sizes | 256MB, 512MB, 1GB, 2GB, 4GB, 8GB** |
| Memory Voltage | 1.8V only |
| Error Detection | Corrects single-bit errors Detects double-bit errors (using ECC memory) Supports Intel® x4 and x8 Single Device Data Correction (SDDC) |
| オンボードデバイス | Chipset | Intel® 5100 (San Clemente) chipset Intel® ICH9R |
| SAS | Broadcom SAS1068E RAID 0, 1, 10 support (Optional: AOC-IButton68) RAID 5 support |
| SATA | Intel ICH9R SB SATAII Controller RAID 0, 1, 5, 10 support (Windows only) RAID 0, 1, 10 support (Linux) |
| IPMI | Support for Intelligent Platform Management Interface v.2.0 / 1.5 200-pin IPMI slot (SIMLC) (Optional: AOC-SIMLC) NOTE: KVM-over-LAN supported w/ AOC-SIM1U+ - PCB 1.1A only |
| Network Controllers | Intel® 82573V & 82573L Gigabit Ethernet Controller Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output |
| Graphics | XGI Z9 with 32 MB of video memory |
| Super I/O | Winbond W83627HG-AW chip |
| Clock Generator | CK505 chip |
| 標準インターフェース | SAS | 8 SAS / SATA ports |
| Serial ATA | Six Serial ATA ports Six SATA hard drives supported |
| IDE | Single EIDE channel supports up to two UDMA IDE devices(IDE-M, IDE-S) including CF card Supports UDMA Mode 5, PIO Mode 4, and ATA/100 Compact Flash (40-pin connector, IDE 1, single channel) slot |
| Floppy | 1 Floppy controller; 1.44 MB, 2.88 MB |
| LAN | 2x RJ45 LAN ports |
| USB | 2x USB rear ports 3x USB internal header 5 total USB ports, 2.0 Compliant / 1.1 Compliant |
| VGA | 1x VGA Port |
| Keyboard / Mouse | PS/2 keyboard and mouse ports |
| Serial Port / Header | 1 Fast UART 16550 serial port 1 Header |
| Chassis ( Optimized for X7DCL-3) | 1U Chassis | CSE-813MTQ-520C CSE-813MTQ-280C CSE-813MT-420C CSE-813MT-410C |
| 2U Chassis | CSE-823TQ-550LP CSE-823T-550LP CSE-823MTQ-R700LP CSE-825TQ-560LP CSE-825MTQ-R700LP |
| Mid Tower | CSE-733TQ-645 CSE-733TQ-465 |
| Tower / 4U Rackmount | CSE-743T-645 |
| Important Chassis Notes | To ensure system stability, a 500W (minimum) ATX power supply [8-pin (+12V) and 24-pin are required] |
| 拡張スロット | PCI-Express | 2 (x8) PCI-e slots 1 (x4) PCI-e (using x8) slot |
| PCI | 3x 32-bit PCI slots |
| BIOS | BIOS Type | 8Mb Flash EEPROM with Phoenix ® BIOS |
| BIOS Features | Plug and Play (PnP) DMI 2.3 PCI 2.2 ACPI 1.0/2.0/3.0 USB Keyboard support Hardware BIOS Virus protection SMBIOS 2.5 |
| マネージメント | Software | Optional IPMI (Intelligent Platform Management Interface) v1.5 / 2.0 SuperDoctor® III Watch Dog NMI |
| Power Configurations | ACPI Power Management Main Switch Override Mechansim Wake-On-Ring (WOR) header Wake-On-LAN (WOL) header Power-on mode for AC power recovery Internal/External modem remote ring-on |
| システム監視機能 | Voltage | Monitors for CPU Cores,+1.8V, +3.3V, +5V, ±12V, +3.3V Stdby, +5 Stdby, VBAT, HT, Memory, Chipset CPU Core 6-Phase-switching voltage regulator with auto-sense from 0.8375V-1.60V |
| FAN | Total of six 4-pin fans 6x fans with tachometer monitoring Status monitor for speed control Status monitor for on/off control Support for 3-pins (w/o speed control) Low noise fan speed control Pulse Width Modulated (PWM) fan connectors |
| Temperature | Monitoring for CPU and chassis environment CPU thermal trip support Thermal Control for 6x Fan Connectors PSU I2C temperature sensing logic Thermal Monitor 2 (TM2) support PECI |
| LED | CPU / System Overheat LED Suspend-state Indicator LED |
| Other Features | Chassis intrusion detection Chassis intrusion header Chipkill Support |
| 動作環境 | Environmental Spec. | Operating Temperature: 10° to 35°C (50° to 95°F) Non-operating Temperature: -40° to 70°C (-40° to 158°F) Operating Relative Humidity: 8% to 90% (non-condensing) Non-operating Relative Humidity: 5 to 95% (non-condensing) |
パーツ仕様
| Parts List | |||
|---|---|---|---|
| 型番 | 数量 | 内容 | |
| X7DCL-3 | MBD-X7DCL-3-O | 1 | X7DCL-3 Motherboard |
| Manual(s) | MNL-0957 | 1 | Motherboard Manual for X7DCL-3 |
| Retention | SKT-0159L | 1 | Retention Kit |
| I/O Cables | CBL-022L | 1 | ATX Floppy Cable |
| I/O Cables | CBL-036L-03 | 1 | ATA 66/100 IDE LP Cable |
| I/O Cables | CBL-0044L | 8 | 2ft. Amphenol, SATA Cable |
| Driver Disk | CDR-X7 1.23 | 1 | Version 1.23 CD or later |
| I/O Shield | CSE-PT7L | 1 | Motherboard I/O Shield |
