製品情報

生産終了

X7DWN+

製品種別 マザーボード
CPUソケット数
CPU
CPUソケット LGA771
マザーボードサイズ Enhanced Extended ATX
製品説明

Supermicroについて


製品仕様

Product SKUs - Discontinued SKU (EOL). Please contact sales-rep for alternative options.
MBD-X7DWN+-O X7DWN+(Standard Retail Pack)
MBD-X7DWN+-B X7DWN+(Bulk Pack)
フォームファクター/外形寸法
Form Factor Enhanced Extended ATX
Dimensions 13.05" x 13.68" (33.1cm x 34.7cm)
プロセッサ/キャッシュ
CPU Dual 771-pin LGA Sockets
Supports up to Dual Intel® 64-bit Xeon®processor(s) of the same type below:
  • Quad-Core Intel® Xeon®Processor
    5400/5300LV sequence (Harpertown/Clovertown processor)up to 3.20 GHz
  • Dual-Core Intel® Xeon®Processor 5200/5100LV sequence (Wolfdale/Woodcrest processor) up to 3.40 GHz
System Bus 1600 / 1333 / 1066 MHz system bus
メモリ
Memory Capacity Sixteen 240-pin DIMM sockets
Supports up to 128 GB 800* / 667 / 533MHz DDR2 ECC FB-DIMM memory
Dual branch memory bus
Memory must be populated in pairs
Memory Sparing supported
Memory Type 800* / 667 / 533MHz FB-DIMM (Fully Buffered DIMM) ECC DDR2 SDRAM 72-bit, 240-pin gold-plated DIMMs
DIMM Sizes 512 MB, 1GB, 2GB, 4GB , 8GB**
Memory Voltage 1.8 V or 1.5 V
Error Detection Corrects single-bit errors
Detects double-bit errors (using ECC memory)
Supports Intel® x4 and x8 Single Device Data Correction (SDDC)
オンボードデバイス
Chipset Intel® 5400 (Seaburg) chipset
ESB2
SATA Intel ESB2 SATA 3.0Gbps Controller
RAID 0, 1, 5, 10 support (Windows only)
RAID 0, 1, 10 support (Linux)
IPMI Support for Intelligent Platform Management Interface v.2.0 / 1.5
200-pin IPMI slot (SIMSO(+))
(Optional: AOC-SIMSO(+))
For Dedicated LAN, cable CBL-0177L must be used (cable sold separately)
Network Controllers Intel® 82575 Dual-Port Gigabit Ethernet Controller
Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output
Intel® I/OAT support for fast, scaleable, and reliable networking
Graphics ATI ES1000 controller with 32 MB of video memory
Super I/O Winbond 83627HG chip
標準インターフェース
Serial ATA Six Serial ATA ports
Six SATA hard drives supported
IDE Single EIDE channel supports up to two UDMA IDE devices (IDE-M, IDE-S) including CF(Compact Flash) Card
Compact Flash (40-pin connector, IDE 1, single channel) slot
Supports UDMA Mode 5, PIO Mode 4, and ATA/100
Floppy 1 Floppy controller; 1.44 MB
LAN 2x RJ45 LAN ports
USB 2x USB rear ports
3x USB internal headers
Total 5 USB 2.0 Compliant / 1.1 Compliant
VGA 1x VGA Port
Keyboard / Mouse PS/2 keyboard and mouse ports
Serial Port / Header 1 Fast UART 16550 serial port
1 Serial header
Chassis ( Optimized for X7DWN+)
2U Chassis CSE-825TQ-R700LP(Air shroud, MCP-310-82502-0N, need to order separately)
Tower / 4U Rackmount CSE-745TQ-R800
Important Chassis Notes To ensure system stability, a 550W (minimum) ATX power supply[4-pin (+12V), 8-pin (+12V) and 24-pin are required]
拡張スロット
PCI-Express 3 (x8) PCI-e slots (2 w/ Gen 2.0)
1 (x4) PCI-e slot (Using x8 slot)
PCI-X 2x 64-bit 133MHz PCI-X (3.3V) slots
UIO 1x UIO slot
BIOS
BIOS Type 8Mb Flash EEPROM with Phoenix® BIOS
BIOS Features Plug and Play (PnP)
DMI 2.3
PCI 2.2
ACPI 1.0 / 2.0
USB Keyboard support
SMBIOS 2.3
マネージメント
Software Optional IPMI (Intelligent Platform Management Interface) 2.0
SuperDoctor® III
Watch Dog
NMI
Power Configurations ACPI Power Management
Main Switch Override Mechanism
Wake-On-Ring (WOR) header
Wake-On-LAN (WOL) header
Keyboard Wakeup from Soft-Off
Power-on mode for AC power recovery
システム監視機能
Voltage Monitors for CPU Cores, +1.8V, +3.3V, +5V, ±12V, +3.3V Standby, +5V Standby, VBAT, Memory, Chipset Voltages.
5-Phase-switching voltage regulator with auto-sense from 0.8375V-1.60V
FAN Total of eight fan headers supporting up to 8 fans
Four 4-pin fan headers
Four 3-pin fan headers
8x fans with tachometer status monitoring
Status monitor for speed control
Support 3-pin fans
Low noise fan speed control
Pulse Width Modulated (PWM) fan connectors
Temperature Monitoring for CPU and chassis environment
CPU thermal trip support
Thermal Control for 8x fan connectors
Thermal Monitor 2 (TM2) support
PECI
LED CPU / System Overheat LED
Other Features Chassis intrusion detection
Chassis intrusion header
SDDC Support
動作環境
Environmental Spec. Operating Temperature: 10° to 35°C (50° to 95°F)
Non-operating Temperature: -40° to 70°C (-40° to 158°F)
Operating Relative Humidity: 8% to 90% (non-condensing)
Non-operating Relative Humidity: 5 to 95% (non-condensing)

パーツ仕様

Parts List
型番 数量 内容
X7DWN+ MBD-X7DWN+-O 1 X7DWN+Motherboard
Manual(s) MNL-0912 1 Motherboard Manual for X7DWN+
I/O Cables CBL-022L 1 ATX Floppy Cable
I/O Cables CBL-036L-03 1 ATA 66/100 IDE LP Cable
I/O Cables CBL-0044L 6 2ft. Amphenol, SATA Cable
Driver Disk CDR-X7 1.23 1 Version 1.23 CD or later
I/O Shield CSE-PT7L 1 Motherboard I/O Shield