生産終了
X8DTH-i
| 製品種別 | マザーボード |
|---|---|
| CPUソケット数 | |
| CPU | |
| CPUソケット | LGA1366 |
| マザーボードサイズ | Extended ATX (SSI EEB) |
| 製品説明 |
Supermicroについて
製品仕様
| Product SKUs - Discontinued SKU (EOL). Please contact sales-rep for alternative options. | MBD-X8DTH-i-O | X8DTH-i(Standard Retail Pack) |
|---|---|
| MBD-X8DTH-i-B | X8DTH-i(Bulk Pack) |
| フォームファクター/外形寸法 | Form Factor | Extended ATX |
| Dimensions | 12" x 13" (30.5cm x 33cm) |
| プロセッサ/キャッシュ | CPU | Dual 1366-pin LGA Sockets Supports up to two Intel® 64-bit Xeon® processor(s) of the same type below:
|
| QPI | up to 6.4 GT/s |
| メモリ | Memory Capacity | 12x 240-pin DIMM slots Supports up to 192 GB 1333 / 1066 / 800MHz DDR3 ECC Registered memory Supports up to 48 GB 1333 / 1066 / 800MHz DDR3 ECC / Non ECC Unbuffered memory Memory Mirroring supported |
| Memory Type | 1333 / 1066 / 800MHz ECC Registered / ECC or Non ECC Unbuffered DDR3 SDRAM 72-bit, 240-pin gold-plated DIMMs |
| DIMM Sizes | 1GB, 2GB, 4GB, 8GB, 16GB |
| Memory Voltage | 1.5 V / 1.35V |
| Error Detection | Corrects single-bit errors Detects double-bit errors (using ECC memory) Supports Intel® x4 and x8 Single Device Data Correction (SDDC) |
| オンボードデバイス | Chipset | Intel® 5520 (Tylersburg) chipset ICH10R + 2x IOH-36D |
| SATA | Intel ICH10R SATA 3.0Gbps Controller RAID 0, 1, 5, 10 support (Windows) RAID 0, 1, 10 support (Linux) |
| Network Controllers | Intel® 82576 Dual-Port Gigabit Ethernet Controller Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output Intel® I/OAT 3 support for fast, scaleable, and reliable networking VMDq support for better performance of virtualization |
| Graphics | Matrox G200eW |
| Super I/O | Winbond 83827HF chip |
| 標準インターフェース | Serial ATA | Six Serial ATA ports Six SATA hard drives supported |
| LAN | 2x RJ45 LAN ports |
| USB | 2x USB rear ports 2x USB on-board 4x USB internal headers Total 8 USB 2.0 Compliant |
| VGA | 1x VGA Port |
| Keyboard / Mouse | PS/2 keyboard and mouse ports |
| Serial Port | 1 Fast UART 16550 serial port |
| Chassis ( Optimized for X8DTH-i) | 1U Chassis | CSE-111T-560CB CSE-113TQ-700CB CSE-113TQ-R650CB CSE-815TQ-560CB CSE-815TQ-700CB CSE-815TQ-720CB |
| 2U Chassis | CSE-216A-R900LPB CSE-216E1-R900LPB CSE-216E2-R900LPB CSE-825TQ-560LPB |
| 3U Chassis | CSE-836E1-R800B CSE-836E16-R1200B CSE-836E2-R800B CSE-836E26-R1200B CSE-933E1-R760B CSE-933E2-R760B CSE-933T-R760B CSE-936A-R900B CSE-936E1-R900 CSE-936E16-R1200B |
| Tower / 4U Rackmount | CSE-745TQ-920B CSE-747TG-R1400B-SQ CSE-846E1-R900B CSE-846E16-R1200B CSE-846E2-R900 CSE-846TQ-R900B CSE-847A-R1400LPB CSE-847E1-R1400LPB CSE-847E16-R1400LPB CSE-847E2-R1400LPB CSE-847E26-R1400LPB |
| Important Chassis Notes | To support the new generation Intel® Xeon® processor-based motherboards, a Revision K chassis is recommended for most models. Please talk to your sales representative or follow the link for details. |
| 拡張スロット | PCI-Express | 7 (x8) PCI-E 2.0 ( in x16 slot) |
| BIOS | BIOS Type | 32Mb SPI Flash EEPROM with AMI® BIOS |
| BIOS Features | Plug and Play (PnP) PCI 2.2 ACPI up to 3.0 USB Keyboard support |
| マネージメント | Software | SuperDoctor® III |
| Power Configurations | ACPI / ACPM Power Management |
| システム監視機能 | Voltage | Monitors for CPU Cores, +1.8V, +3.3V, +5V, +12V, +3.3V Standby, +5V Standby, VBAT, Memory, Chipset Voltages. 6-Phase-switching voltage regulator |
| FAN | Total of eight fan headers supporting up to 8 fans Eight 4-pin fan headers 8x fans with tachometer status monitoring Support 3-pin fans (w/o speed control) Low noise fan speed control (4-pin fan only) |
| Temperature | Monitoring for CPU and chassis environment Thermal Control for 8x fan connectors PECI |
| Other Features | Chassis intrusion detection Chassis intrusion header |
| 動作環境 | Environmental Spec. | Operating Temperature: 10° to 35° C (50° to 95°F) Non-operating Temperature: -40° to 70° C (-40° to 158° F) Operating Relative Humidity: 8% to 90% (non-condensing) Non-operating Relative Humidity: 5 to 95% (non-condensing) |
パーツ仕様
| Parts List | |||
|---|---|---|---|
| 型番 | 数量 | 内容 | |
| X8DTH-i | MBD-X8DTH-i-O | 1 | X8DTH-iMotherboard |
| I/O Cable 1 | CBL-0044L | 6 | 57.5CM SATA FLAT S-S PBF |
| I/O Cable 2 | CBL-0083L | 1 | 15.7" USB 2.0 2-PORT W/KEY |
| I/O Cable 3 | CBL-010L | 1 | 9 PIN SERIAL PORT DTK CABLE, LF |
| I/O Shield | MCP-260-00027-0N | 1 | STD I/O SHIELD FOR X8, H8, X7SB3 SERVER MB (3RD LAN + 4XLAN) |
| Manual | MNL-1083-QRG | 1 | X8DTH-6(F)/-I(F) QUICK REFERENCE GUIDE |
