生産終了
X9DAX-7F-HFT
製品種別 | マザーボード |
---|---|
CPUソケット数 | |
CPU | |
CPUソケット | LGA2011 |
マザーボードサイズ | Enhanced Extended ATX |
製品説明 |
製品仕様
Product SKUs - Discontinued SKU (EOL). Please contact sales-rep for alternative options. | MBD-X9DAX-7F-HFT -O | X9DAX-7F-HFT (Standard Retail Pack) |
---|---|
MBD-X9DAX-7F-HFT -B | X9DAX-7F-HFT (Bulk Pack) |
フォームファクター/外形寸法 | Form Factor | Enhanced Extended ATX |
Dimensions | 13.68" x 13" (34.74cm x 33cm) |
プロセッサ/キャッシュ | CPU | Intel® Xeon® processor E5-2600 and E5-2600 v2 family† (up to 150W TDP **) Dual Socket R (LGA 2011) |
Cache | Up to 30MB |
System Bus | QPI up to 8 GT/s |
Note | † BIOS version 3.0 or above is required ** Motherboard supports this maximum TDP. Please verify your system can thermally support |
メモリ | Memory Capacity | 16x 240-pin DDR3 DIMM slots Up to 1TB DDR3 ECC LRDIMM Up to 512GB DDR3 ECC RDIMM Up to 128GB DDR3 ECC/non-ECC UDIMM |
Memory Type | 1866/1600/1333/1066/800MHz* ECC DDR3 SDRAM 72-bit, 240-pin gold-plated DIMMs Support ECC and non-ECC UDIMMs* Maximum memory speed may be capped by CPU. Please verify that the chosen CPU can support desired memory speed. |
DIMM Sizes | 32GB, 16GB, 8GB, 4GB, 2GB, 1GB,64GB LRDIMM |
Memory Voltage | 1.5 V, 1.35 V |
Error Detection | Corrects single-bit errors Detects double-bit errors (using ECC memory) |
オンボードデバイス | Chipset | Intel® C602 chipset |
SATA | SATA 2.0 3Gb/s with RAID 0, 1, 5, 10 SATA 3.0 6Gb/s with RAID 0, 1 |
SAS | SAS2 from Broadcom 2208 (1GB cache) HW RAID 0, 1, 5, 6, 10, 50, 60 support Supports up to 16 devices as default, more HDD devices support is also available as an option ** For special sku, please contact your Supermicro Sales.(Both CPUs need to be installed for SAS controller to be enabled) |
IPMI | Support for Intelligent Platform Management Interface v.2.0 IPMI 2.0 with virtual media over LAN and KVM-over-LAN support Nuvoton WPCM450 BMC |
Network Controllers | Intel® i350 Dual Port Gigabit Ethernet Virtual Machine Device Queues reduce I/O overhead Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output 1x Realtek RTL8201N PHY (dedicated IPMI) |
Video | Matrox G200eW |
Audio | RealTek ALC889 7.1 High Definition Audio with S/PDIF header |
標準インターフェース | SATA | 2 SATA 3.0 ports (6Gb/s) 8 SATA 2.0 ports (3Gb/s) |
SAS | 8 SAS2 ports (6Gb/s) |
LAN | 2 RJ45 Gigabit Ethernet LAN ports 1 RJ45 Dedicated IPMI LAN port |
USB | 4 USB 3.0 ports (Renesas uPD720200A; 2 rear + 2 via header) 7 USB 2.0 ports total(4 rear + 2 via header + 1 Type A) |
Audio | Line-in / Line-out / Microphone Ports |
Serial Port / Header | 1 Fast UART 16550 Header |
IEEE 1394a | 2 Headers |
DOM | 1 DOM (Disk on Module) power connector |
TPM | 1 TPM Header |
Chassis (Optimized for X9DAX-7F-HFT ) | 2U Chassis | CSE-829BTQ-R1K28LPB |
Important Chassis Notes | To support the new generation Intel® Xeon® processor-based motherboards, Revision M chassis is recommended. Please talk to your sales representative for details. |
SuperServer(s) with X9DAX-7F-HFT | Model(s) | SYS-6027AX-72RF-HFT1 SYS-6027AX-72RF-HFT3 SYS-6027AX-72RF-HFT2 |
拡張スロット | PCI-Express | 2x PCI-E 3.0 x16 3x PCI-E 3.0 x8 1x UIO PCI-E 3.0 x8 (for SMCI UIO HBA) or 1x PCI-E 2.0 x4 (in x8)(Both CPUs need to be installed for full access to PCI-E slots and onboard controllers. See manual block diagram for details.) |
BIOS | BIOS Type | 128Mb SPI Flash EEPROM with AMI BIOS |
BIOS Features | Plug and Play (PnP) APM 1.2 PCI 2.3 ACPI 1.0 / 2.0 / 3.0 / 4.0 USB Keyboard support SMBIOS 2.7.1 UEFI 2.3.1 |
マネージメント | Software | SuperDoctor® III Watch Dog NMI IPMI 1.5 / 2.0 |
Power Configurations | ACPI / APM Power Management Power-on mode for AC power recovery |
システム監視機能 | Voltage | Monitors for CPU Cores, +1.1V, +1.5V, +3.3V, +5V, +12V, +3.3V Standby, +5V Standby, VBAT, Memory Voltages. 6+1 Phase-switching voltage regulator |
FAN | 8x 4-pin fan headers (up to 8 fans) 8x fans with tachometer monitoring Status monitor for speed control Pulse Width Modulated (PWM) fan connectors |
Temperature | Monitoring for CPU and chassis environment CPU thermal trip support Thermal Control for 8x Fan Connectors Thermal Monitor 2 (TM2) support PECI |
LED | CPU / System Overheat LED Suspend static indicator LED |
Other Features | Chassis intrusion detection Chassis intrusion header RoHS, Halogen Free |
動作環境 | Operating Temperature Range | 10°C - 35°C (50°F - 95°F) |
Non-Operating Temperature Range | -40°C - 70°C (-40°F - 158°F) |
Operating Relative Humidity Range | 8% - 90% (non-condensing) |
Non-Operating Relative Humidity Range | 5% - 95% (non-condensing) |