生産終了
H8DG6-F
| 製品種別 | マザーボード |
|---|---|
| CPUソケット数 | |
| CPU | |
| CPUソケット | LGA1944 (Socket G34) |
| マザーボードサイズ | Extended ATX (SSI EEB) |
| 製品説明 |
Supermicroについて
製品仕様
| Product SKUs - Discontinued SKU (EOL). Please contact sales-rep for alternative options. | MBD-H8DG6-F | H8DG6-F (Standard Retail Pack) |
|---|---|
| フォームファクター/外形寸法 | Form Factor | E-ATX Form |
| Dimensions | 12" x 13 " (30.5cm x 33.2cm) |
| Processor/Chipset | CPU | Dual 1944-pin Socket G34 Supports up to two 16/12/8/4-Core ready AMD Opteron™ 6000 Series processors HT3.0 Link support |
| Chipset | Dual AMD chipset SR5690/SP5100 |
| メモリ | Memory Capacity | 16 DIMM sockets Supports up to 512GB Registered ECC or 128GB Unbuffered ECC/non-ECC DDR3 1600/1333/1066 SDRAM in 16 DIMMs Quad channel memory bus For Dual CPUs: Recommended that memory be populated equally in adjacent memory banks See Detailed Memory Support Matrix |
| Memory Type | DDR3 1600/1333/1066 MHz Registered ECC or unbuffered ECC / non-ECC SDRAM 72-bit, 240-pin gold-plated DIMMs |
| DIMM Sizes | 1GB, 2GB, 4GB, 8GB, 16GB, 32GB |
| Memory Voltage | 1.35V or 1.5V |
| Error Detection | Corrects single-bit errors Detects double-bit errors (using ECC memory) |
| オンボードデバイス | SATA | AMD SP5100 (RAID 0, 1, 10) |
| SAS | LSI 2008 8 port SAS controller RAID 0, 1, 10; RAID 5 Optional Optional: AOC-SAS2-RAID5-KEYRAID 5 support |
| IPMI | Support for Intelligent Platform Management Interface v.2.0 IPMI 2.0 with virtual media over LAN and KVM over LAN support Winbond® WPCM450 BMC |
| Network Controllers | Intel® 82576 controller, Dual-Port Gigabit Ethernet 10/100/1000BASE-T support |
| VGA | Matrox G200 16MB DDR2 |
| Super I/O | Winbond® W83527 chip |
| 標準インターフェース | SATA | 6x SATA2.0 (3Gb/s) Ports |
| SAS | Integrated LSI 2008 SAS2 Controller Each SAS port supports up to 4 SAS / SATA drives |
| LAN | 2 RJ45 LAN ports 1 RJ45 Dedicated LAN supports IPMI |
| USB | 8x USB 2.0 ports 2x Rear and 2x header (4 ports), 2x TypeA |
| VGA | 1x VGA port |
| Keyboard / Mouse | PS/2 keyboard and mouse ports |
| Serial Ports | 1x Fast UART 16550 serial port 1x serial port header |
| Others | 1 SATA DOM power connector, TPM header |
| Chassis ( Optimized for H8DG6-F ) | Tower / 4U Rackmount | CSE-745TQ-R920B |
| BIOS | BIOS Type | 16Mb SPI Flash ROM with AMI® BIOS |
| BIOS Features | Plug and Play (PnP) DMI 2.3 PCI 2.2 ACPI 2.0 USB Keyboard Support SMBIOS 2.3 |
| マネージメント | Software | IPMI (Intelligent Platform Management Interface) 2.0 Super Doctor III Watch Dog |
| Power Configurations | ACPI Power Management Wake-On-LAN (WOL) header Keyboard Wakeup from Soft-Off Power-on mode control for AC power loss recovery |
| システム監視機能 | CPU | Monitors CPU Core Voltages, +1.8V, +3.3V, +5V, ±12V, +3.3V Standby, VBAT, HT, memory, chipset CPU switching voltage regulator |
| FAN | Up to 8-fan status tachometer monitoring Up to eight 4-pin fan headers Status monitor for speed control 3-pin fan support (w/o speed control) Low noise fan speed control (4-pin fan only) Pulse Width Modulated (PWM) fan connectors |
| Temperature | Monitoring for CPU and chassis environment CPU Thermal Trip Support Thermal control for 8x Fan connectors I2C Temperature Sensing Logic |
| LED | CPU / System Overheat LED +5V Standby Alert LED |
| Other Features | Chassis Intrusion Detection Chassis Intrusion Header |
| 動作環境/コンプライアンス | RoHS | RoHS Compliant 6/6, Pb Free |
| Environmental Specifications | Operating Temperature: 10°C to 35°C (50°F to 95°F) Non-operating Temperature: -40°C to 70°C (-40°F to 158°F) Operating Relative Humidity: 8% to 90% (non-condensing) Non-operating Relative Humidity: 5% to 95% (non-condensing) |
| Regulatory | FCC | Passed to meet FCC standard requirement |
パーツ仕様
| Retail Pack List | |||
|---|---|---|---|
| 型番 | 数量 | 内容 | |
| H8DG6-F | MBD-H8DG6-F -O | 1 | H8DG6-F Motherboard |
| I/O Cable 1 | CBL-0044L | 4 | 57.5CM SATA FLAT S-S PBF |
| I/O Cable 2 | CBL-0083L | 1 | 15.7" USB 2.0 2-PORT W/KEY |
| I/O Cable 3 | CBL-0097L-02 | 2 | 79536-3220,50CM IPASS TO 4 SATA,PB FREE |
| I/O Cable 4 | CBL-010L | 1 | 9 PIN SERIAL PORT DTK CABLE, LF |
| I/O Shield | MCP-260-00027-0N | 1 | STD I/O SHIELD FOR X8, H8, X7SB3 SERVER MB (3RD LAN + 4XLAN) |
