NEW
R263-Z32 (rev. AAD1)
| 製品種別 | サーバ |
|---|---|
| CPUソケット数 | 1 |
| CPU | |
| 筐体サイズ | 2U |
| 最大GPU数 | |
| 電源仕様 | リダンダント電源 |
| 用途/特長 | |
| 製品説明 | 主な特徴
AMD EPYC™ 9004シリーズ プロセッサー
シングルプロセッサ、5nmテクノロジー
12チャネルRDIMM DDR5、12 x DIMM
デュアルROMアーキテクチャ対応
1Gb/s LANポート×1 (Intel® I210-AT)
1 x 専用の管理ポート
12 x 2.5" Gen4 NVMe ホットスワップ対応
12 x 2.5" SATA ホットスワップ対応
1 x 超高速M.2（PCIe Gen3 x4インターフェイス
2 x PCIe Gen5 x16拡張スロット
2 x OCP 3.0 Gen5 x16 メザニンスロット
デュアル1600W (240V) 80 PLUS Platinum リダンダント電源 |
AMD 第4世代 EPYC 9004シリーズについて
製品仕様
| Dimensions (WxHxD, mm) | 2U 438 x 87.5 x 700 |
|---|---|
| Motherboard | MZ33-DC0 |
| CPU | AMD EPYC™ 9004 series processor family Single processor, 5nm technology Up to 96-core, 192 threads per processor cTDP up to 360W Supports CPU 400W at ambient 30°C |
| Socket | 1 x LGA 6096 Socket SP5 |
| Chipset | System on Chip |
| Memory | 12 x DIMM slots DDR5 memory supported only 12-Channel memory architecture RDIMM modules up to 128GB supported 3DS RDIMM modules up to 256GB supported Memory speed: Up to 4800 MHz |
| LAN | 1 x 1Gb/s LAN port (1 x Intel® I210-AT) Supported NCSI function 1 x 10/100/1000 management LAN |
| Video | Integrated in Aspeed® AST2600 2D Video Graphic Adapter with PCIe bus interface 1920x1200@60Hz 32bpp, DDR4 SDRAM |
| Audio | N/A |
| Storage | 12 x 2.5" Gen4 NVMe hot-swappable bays 12 x 2.5" SATA/SAS hot-swappable bays SAS card is required for SAS devices support |
| SAS | Depends on SAS Add-on card |
| RAID | N/A |
| Peripheral Drives | N/A |
| Expansion Slots | Riser Card CRS201M: - 1 x PCIe x16 slot (Gen5 x16), FHHL Riser Card CRS201H: - 1 x PCIe x16 slot (Gen5 x16), FHHL 2 x OCP 3.0 slots with PCIe Gen5 x16 bandwidth Supported NCSI function 1 x M.2 slot: - M-key - PCIe Gen3 x4 - Supports 2280/22110 cards |
| Internal I/O | 1 x M.2 slot 1 x TPM header 2 x OCP 3.0 mezzanine slots |
| Front I/O | 2 x USB 3.2 Gen1 1 x Power button with LED 1 x ID button with LED 1 x NMI button 1 x Reset button 1 x LAN activity LED 1 x HDD activity LED 1 x System status LED |
| Rear I/O | 2 x USB 3.2 Gen1 1 x Mini-DP 1 x RJ45 1 x MLAN 1 x ID button with LED |
| Backplane I/O | Backplane P/N: 9CBP20O7NR-00 Speed and bandwidth: PCIe Gen4 x4 or SATA 6Gb/s or SAS 12Gb/s |
| TPM | 1 x TPM header with SPI interface Optional TPM2.0 kit: CTM010 |
| Power Supply | Dual 1600W (240V) 80 PLUS Platinum redundant power supply AC Input: - 100-120V~/ 12A, 50-60Hz - 200-240V~/ 10A, 50-60Hz DC Input: - 240Vdc/ 10A DC Output: - Max 1000W/ 100-120V~ + 12V/ 81.5A + 12Vsb/ 2.5A - Max 1600W/ 200-240V~ or 240Vdc Input + 12V/ 133A + 12Vsb/ 2.5A NOTE: The default power supply is based on a basic system configuration. Please contact with technical representatives to determine the best power supply selection for your system configuration requirements and preferred efficiency. |
| System Management | Aspeed® AST2600 management controller GIGABYTE Management Console (AMI MegaRAC SP-X) web interface
|
| OS Compatibility | Please refer to OS compatibility table in support page |
| System Fans | 4 x 80x80x38mm (18,300rpm) |
| Operating Properties | Operating temperature: 10°C to 35°C Operating humidity: 8%-80% (non-condensing) Non-operating temperature: -40°C to 60°C Non-operating humidity: 20%-95% (non-condensing) |
| Packaging Dimensions | 989 x 594 x 279 mm |
| Packaging Content | 1 x R263-Z32 1 x CPU heatsink 1 x Mini-DP to D-Sub cable 1 x Rail kit |
| Part Numbers | - Barebone package: 6NR263Z32DR000AAD1* - Motherboard: 9MZ33DC0UR-000 - Rail kit: 25HB2-3A0203-K0R - CPU heatsink: 25ST1-143100-A0R - M.2 heatsink: 12SP2-11000E-00R - Front panel board: 9CFP2001NR-00 - Back plane board: 9CBP20O7NR-00 - Fan module: 25ST2-88382T-S1R - Riser card - CRS201M: 9CRS201MNR-00 - Riser card - CRS201H: 9CRS201HNR-00 - Mini-DP to D-Sub cable: 25CRN-200801-K1R - Power supply: 25EP0-216008-L0S |
