NEW
R263-S33 (rev. AAF1)
製品種別 | サーバ |
---|---|
CPUソケット数 | 1 |
CPU | |
筐体サイズ | 2U |
最大GPU数 | 3 |
電源仕様 | リダンダント電源 |
用途/特長 | |
製品説明 | 主な特徴
double slot GPUカードを最大3枚搭載
第4世代インテル® Xeon® スケーラブル・プロセッサー
インテル® Xeon® CPU マックス・シリーズ
シングルプロセッサ、LGA 4677
プロセッサーあたり8チャネルRDIMM DDR5、16 x DIMM
インテル® Optane™ パーシステント・メモリ 300 シリーズ
Dual ROMアーキテクチャ
1 x 1Gb/秒 LANポート(Intel® I210-AT)
1 x 専用の管理ポート
12 x 3.5/2.5" SATA ホットスワップ対応
1 x 超高速M.2 (PCIe Gen3 x4インターフェイス)
3 x PCIe Gen5 x16 拡張スロット
2 x OCP 3.0 Gen5 x16 メザニンスロット
Dual2400W (240V) 80 PLUS Platinum Redundant 電源 |
製品仕様
Dimensions (WxHxD, mm) | 2U 438 x 87.5 x 700 |
---|---|
Motherboard | MS33-DC0 |
CPU | 4th Generation Intel® Xeon® Scalable Processors Intel® Xeon® CPU Max Series CPU TDP up to 350W |
Socket | 1 x LGA 4677 Socket E |
Chipset | Intel® C741 Chipset |
Memory | 16 x DIMM slots DDR5 memory supported only 8-Channel memory architecture RDIMM modules up to 128GB supported 3DS RDIMM modules up to 256GB supported Memory speed: Up to 4800 MHz (1DPC), 4400 MHz (2DPC) |
LAN | 1 x 1Gb/s LAN port (1 x Intel® I210-AT) Supported NCSI function 1 x 10/100/1000 management LAN |
Video | Integrated in Aspeed® AST2600 2D Video Graphic Adapter with PCIe bus interface 1920x1200@60Hz 32bpp, DDR4 SDRAM |
Audio | N/A |
Storage | 12 x 3.5/2.5" SATA/SAS hot-swappable bays SAS card is required for SAS devices support |
SAS | Depends on SAS Add-on card |
RAID | Intel® SATA RAID 0/1/10/5 |
Peripheral Drives | N/A |
Expansion Slots | Riser Card CRS201C: - 1 x PCIe x16 slot (Gen5 x16), FHFL Riser Card CRS201D: - 1 x PCIe x16 slot (Gen5 x16), FHFL Riser Card CRS2018: - 1 x PCIe x16 slot (Gen5 x16), FHFL 2 x OCP 3.0 slots with PCIe Gen5 x16 bandwidth Supported NCSI function 1 x M.2 slot: - M-key - PCIe Gen3 x4 - Supports 2280/22110 cards - From PCH (C741) |
Internal I/O | 1 x M.2 slot 1 x TPM header 2 x OCP 3.0 mezzanine slots |
Front I/O | 2 x USB 3.2 Gen1 1 x Power button with LED 1 x ID button with LED 1 x NMI button 1 x Reset button 1 x LAN activity LED 1 x HDD activity LED 1 x System status LED |
Rear I/O | 2 x USB 3.2 Gen1 1 x Mini-DP 1 x RJ45 1 x MLAN 1 x ID button with LED |
Backplane I/O | Backplane P/N: 9CBP20C5NR-00 Speed and bandwidth: PCIe Gen4 x4 or SATA 6Gb/s or SAS 12Gb/s |
TPM | 1 x TPM header with SPI interface Optional TPM2.0 kit: CTM010 |
Power Supply | Dual 2400W (240V) 80 PLUS Platinum redundant power supply AC Input: - 100-127V~/ 12.5A, 47-63Hz - 180-240V~/ 14.5A, 47-63Hz DC Input: - 240Vdc/ 12A DC Output: - Max 1000W/ 100-127V~ + 12V/ 84A + 12Vsb/ 3A - Max 2200W/ 180-200V~ + 12V/ 180A + 12Vsb/ 3.5A - Max 2400W/ 200-240V~ or 240Vdc + 12V/ 197A + 12Vsb/ 3.5A NOTE: 1. The system power supply requires C19 type power cord 2. The default power supply is based on a basic system configuration. Please contact with technical representatives to determine the best power supply selection for your system configuration requirements and preferred efficiency. |
System Management | Aspeed® AST2600 management controller GIGABYTE Management Console (AMI MegaRAC SP-X) web interface
|
OS Compatibility | Please refer to OS compatibility table in support page |
System Fans | 4 x 80x80x38mm (18,300rpm) |
Operating Properties | Operating temperature: 10°C to 35°C Operating humidity: 8%-80% (non-condensing) Non-operating temperature: -40°C to 60°C Non-operating humidity: 20%-95% (non-condensing) |
Packaging Dimensions | 989 x 594 x 279 mm |
Packaging Content | 1 x R263-S33 1 x CPU heatsink 1 x Mini-DP to D-Sub cable 3 x Carrier clips 1 x Rail kit |
Part Numbers | - Barebone package: 6NR263S33DR000AAF1* - Motherboard: 9MS33DC0UR-000 - Rail kit: 25HB2-3A0203-K0R - CPU heatsink: 25ST1-4Z3200-S7R - M.2 heatsink: 12SP2-11000E-00R - Front panel board: 9CFP2001NR-00 - Back plane board: 9CBP20C5NR-00 - Fan module: 25ST2-88382T-S1R - Riser card - CRS201C: 9CRS201CNR-00 - Riser card - CRS201D: 9CRS201DNR-00 - Riser card - CRS2018: 9CRS2018NR-00 - Mini-DP to D-Sub cable: 25CRN-200801-K1R - C19 power cord 125V/15A (US): 25CP1-018000-Q0R (optional) - C19 power cord 250V/16A (EU): 25CP3-01830H-Q0R (optional) - Power supply: 25EP0-224000-D0S |