NEW
R263-S33 (rev. AAL1)
| 製品種別 | サーバ |
|---|---|
| CPUソケット数 | 1 |
| CPU | |
| 筐体サイズ | 2U |
| 最大GPU数 | 3 |
| 電源仕様 | リダンダント電源 |
| 用途/特長 | |
| 製品説明 | 主な特徴
最大3枚のダブルスロットGPUカードに対応
第4世代インテル® Xeon® スケーラブル・プロセッサー
インテル® Xeon® CPU マックス・シリーズ
シングルプロセッサ、LGA4677
8チャネルRDIMM DDR5、16 x DIMMs（per processor）
インテル® Optane™ パーシステント・メモリ 300 シリーズ
Dual ROMアーキテクチャ
1 x 1Gb/s LANポート(Intel® I210-AT)
1 x 専用の管理ポート
12 x 3.5/2.5" SATA ホットスワップ対応ベイ
Ultra-Fast M.2（PCIe Gen3 x4インターフェイス搭載）
3 x PCIe Gen5 x16 拡張スロット
2 x OCP 3.0 Gen5 x16 メザニンスロット
Dual 2700W (240V) 80 PLUS Titanium redundant |
第4世代 Intel Xeon Scalable プロセッサーについて
製品仕様
| Dimensions (WxHxD, mm) | 2U 438 x 87.5 x 700 |
|---|---|
| Motherboard | MS33-DC0 |
| CPU | 4th Generation Intel® Xeon® Scalable Processors Intel® Xeon® CPU Max Series Intel® Xeon® Platinum Processor, Intel® Xeon® Gold Processor, Intel® Xeon® Silver Processor CPU TDP up to 350W |
| Socket | 1 x LGA 4677 Socket E |
| Chipset | Intel® C741 Chipset |
| Memory | 16 x DIMM slots DDR5 memory supported only 8-Channel memory architecture RDIMM modules up to 128GB supported 3DS RDIMM modules up to 256GB supported Memory speed: Up to 4800 MHz (1DPC), 4400 MHz (2DPC) |
| LAN | 1 x 1Gb/s LAN port (1 x Intel® I210-AT) Supported NCSI function 1 x 10/100/1000 management LAN |
| Video | Integrated in Aspeed® AST2600 2D Video Graphic Adapter with PCIe bus interface 1920x1200@60Hz 32bpp, DDR4 SDRAM |
| Audio | N/A |
| Storage | 12 x 3.5/2.5" SATA/SAS hot-swappable bays SAS card is required for SAS devices support |
| SAS | Depends on SAS Add-on card |
| RAID | Intel® SATA RAID 0/1/10/5 |
| Peripheral Drives | N/A |
| Expansion Slots | Riser Card CRS201C: - 1 x PCIe x16 slot (Gen5 x16), FHFL Riser Card CRS201D: - 1 x PCIe x16 slot (Gen5 x16), FHFL Riser Card CRS2018: - 1 x PCIe x16 slot (Gen5 x16), FHFL 2 x OCP 3.0 slots with PCIe Gen5 x16 bandwidth Supported NCSI function 1 x M.2 slot: - M-key - PCIe Gen3 x4 - Supports 2280/22110 cards - From PCH (C741) |
| Internal I/O | 1 x M.2 slot 1 x TPM header 2 x OCP 3.0 mezzanine slots |
| Front I/O | 2 x USB 3.2 Gen1 1 x Power button with LED 1 x ID button with LED 1 x NMI button 1 x Reset button 1 x LAN activity LED 1 x HDD activity LED 1 x System status LED |
| Rear I/O | 2 x USB 3.2 Gen1 1 x Mini-DP 1 x RJ45 1 x MLAN 1 x ID button with LED |
| Backplane I/O | Backplane P/N: 9CBP20C5NR-00 Speed and bandwidth: PCIe Gen4 x4 or SATA 6Gb/s or SAS 12Gb/s |
| TPM | 1 x TPM header with SPI interface Optional TPM2.0 kit: CTM010 |
| Power Supply | Dual 2700W (240V) 80 PLUS Titanium redundant power supply AC Input: - 100-127V~/ 12A, 50-60Hz - 200-240V~/ 16A, 50-60Hz DC Input: - 240Vdc/ 16A DC Output: - Max 1008W/ 100-127V~ + 12V/ 84A + 12Vsb/ 3A - Max 2700W/ 200-240V~ + 12V/ 225A + 12Vsb/ 3A NOTE: 1. The system power supply requires C19 type power cord 2. The default power supply is based on a basic system configuration. Please contact with technical representatives to determine the best power supply selection for your system configuration requirements and preferred efficiency. |
| System Management | Aspeed® AST2600 management controller GIGABYTE Management Console (AMI MegaRAC SP-X) web interface
|
| OS Compatibility | Please refer to OS compatibility table in support page |
| System Fans | 4 x 80x80x38mm (18,300rpm) |
| Operating Properties | Operating temperature: 10°C to 35°C Operating humidity: 8%-80% (non-condensing) Non-operating temperature: -40°C to 60°C Non-operating humidity: 20%-95% (non-condensing) |
| Packaging Dimensions | 989 x 594 x 279 mm |
| Packaging Content | 1 x R263-S33 1 x CPU heatsink 1 x Mini-DP to D-Sub cable 3 x Carrier clips 1 x Rail kit |
| Part Numbers | - Barebone package: 6NR263S33DR000AAL1* - Motherboard: 9MS33DC0UR-000 - Rail kit: 25HB2-3A0203-K0R - CPU heatsink: 25ST1-4Z3200-S7R - M.2 heatsink: 12SP2-11000E-00R - Back plane board: 9CBP20C5NR-00 - Fan module: 25ST2-88382T-S1R - Riser card - CRS201C: 9CRS201CNR-00 - Riser card - CRS201D: 9CRS201DNR-00 - Riser card - CRS2018: 9CRS2018NR-00 - Mini-DP to D-Sub cable: 25CRN-200801-K1R - C19 power cord 125V/15A (US): 25CP1-018000-Q0R (optional) - C19 power cord 250V/16A (EU): 25CP3-01830H-Q0R (optional) - Power supply: 25EP0-227000-D0S |
